03 Instruments and controls
The center head restraint should be adjusted
according to the passenger's height. The
restraint should be carefully adjusted to sup-
port the occupant's head.
Manually folding down the rear seat's
outboard head restraints
CAUTION
The rear head restraints should not be
kept folded down for prolonged periods.
This could result in pressure marks in
leather upholstery.
Pull the head restraint up as required.
•
To lower, press and hold the button
•
(located at the center, between the back-
rest and the head restraint) while pressing
the head restrain down carefully.
WARNING
For safety reasons, no one should be
allowed to sit in the outboard rear seat
positions if the head restraints are folded
down. If these positions are occupied, the
head restraints should be in the upright
(fixed) position.
03
WARNING
The center rear seat head restraint should
only be in its lowest position when this
seat is NOT occupied. When the center
position is occupied, the head restraint
should be correctly adjusted to the pas-
senger’s height. The upper edge of the
head restraint should be at least on a level
with the upper-most point of the seat
occupant's ear.
Pull the handle closest to the head
restraint to fold it down.
•
Automatically folding down the rear
seat’s outboard head restraints
To return the head restraint to the upright
position, push it up until it clicks into
place.
•
NOTE
The head restraint must be returned to
the upright position manually.
•
•
The outboard head restraints cannot
be folded down on models that are not
equipped with this button.
1. The ignition must be in mode II.
2. Press the button to lower the rear head
restraints for improved visibility.
}}
85
English 
