03 Instruments and controls
Rear fog lights
The rear fog lights are considerably brighter
than the normal taillights and should be used
only when conditions such as fog, rain, snow,
smoke or dust reduce visibility for other vehi-
cles to less than 500 ft. (150 meters).
Hazard warning flashers
NOTE
The hazard warning flasher should be used to
indicate that the vehicle has become a traffic
hazard.
The rear fog lights are considerably
brighter than the normal taillights and
should be used only when conditions
such as fog, rain, snow, smoke or dust
reduce visibility for other vehicles to
less than 500 ft. (150 meters).
•
When the function is activated, both turn sig-
nal indicators in the instrument panel will
flash.
Condensation may form temporarily on
the inside of the lenses of exterior
lights such as headlights, fog lights, or
taillights. This is normal and the lights
are designed to withstand moisture.
Normally, condensation will dissipate
after the lights have been on for a
short time.
•
03
Related information
Lighting panel (p. 89)
•
The rear fog lights will only function in combi-
nation with the high/low beam headlights.
Location of the hazard warning flasher button
–
To activate the flashers, press the button
in the center dash. Press the button again
to turn off the flashers.
–
Press the button to switch the rear fog
lights on/off.
> The rear fog light indicator symbol
on the instrument panel and the
light in the button illuminate when the
rear fog lights are switched on.
NOTE
Regulations regarding the use of the
hazard warning flasher may vary,
depending on where you live.
•
•
The hazard warning flashers will be
activated automatically if an airbag
deploys.
94
English 
