03 Instruments and controls
||
vehicle's ignition must be in mode I or II
before the laminated panoramic roof/sun
shade can be operated.
Selecting a magnetic zone
Panoramic roof* – introduction
1
The laminated panoramic roof is divided into
two sections. The rear glass section is fixed in
place and cannot be moved but the front
glass section can be slid horizontally to the
open or closed positions or its rear edge can
be raised and lowered to allow ventilation.
2
15
14
CAUTION
3
Remove ice and snow before opening
the laminated panoramic roof.
•
13
4
Do not operate the laminated panor-
amic roof if it is frozen closed.
•
Introduction
12
03
All references in this section to opening or
closing the panoramic roof pertain to the front
glass section.
5
8
11
9
Never place heavy objects on the lami-
nated panoramic roof.
•
10
6
7
The laminated panoramic roof also has a sun
shade made of perforated fabric that is
located below the sections of glass. This
shade can be opened or closed, for example
when driving in bright sunlight.
Magnetic zones.
Wind blocker
The earth is divided into 15 magnetic zones.
The correct zone must be selected for the
compass to work correctly.
1. Put the ignition in mode II.
2. Using a pen or similar object, press and
hold the button on the rear side of mirror
for at least 3 seconds. The number for the
current area will be shown.
3. Press the button repeatedly until the
number for the required geographic area
(1 – 15) is shown.
The laminated panoramic roof is equipped
with a wind blocker that folds up when the
roof is open.
4. The display will revert to showing the
compass direction after several seconds.
Both the laminated panoramic roof and the
sun shade are operated by the controls in the
ceiling console, near the rear-view mirror. The
106
* Option/accessory, for more information, see Introduction.
English 
