03 Instruments and controls
||
Operation
Programming the seat's memory
Three different seating and door mirror posi-
tions can be stored in the driver seat's mem-
ory.
Heated seats*
See Heated seats (p. 130).
NOTE
Related information
Front seats (p. 80)
Only one of the power seat's controls
can be used at the same time.
•
•
•
The following example explains how button
(1) can be programmed. Buttons (2) and (3)
are programmed in the same way.
Rear seats – folding backrest (p. 86)
•
The power seats have an overload
protector that activates if a seat is
blocked by any object. If this occurs,
switch off the ignition (key in posi-
tion 0) and wait for a short period
before operating the seat again.
Rear seats – head restraints (p. 84)
•
To program (store) a seat and door mirror
position in button (1):
03
1. Move the seat (and door mirrors) to the
desired positions using the seat and mir-
ror adjustment controls.
Power seat memory function
2. Press and hold down the M (memory)
button (4).
3. With the memory button depressed,
press button (1) briefly to store the cur-
rent position for the seat/mirrors.
To move the seat and mirrors to the posi-
tion that they were in when a button was
programmed:
–
Press and hold down button (1) until the
seat and mirrors stop moving.
NOTE
Power seat memory buttons
Button for storing a position
As a safety precaution, the seat will stop
automatically if the button is released
before the seat has reached the preset
position.
Button for storing a position
Button for storing a position
M (memory) button
82
* Option/accessory, for more information, see Introduction.
English 
