03 Instruments and controls
Information displays – trip odometer
and clock
Clock
Inserting/removing remote key
The remote key is used to start the engine or
to use various electrical functions without
starting the engine.
The trip odometers T1 and T2 and clock are
displayed in the instrument panel.
Inserting and removing the remote key
Trip odometers
03
Clock, digital instrument panel*
Display6
Setting the clock
The clock can be set in the MY CAR menu
system. See My Car – introduction (p. 76) for
additional information about these menus.
Trip odometer4
Ignition slot with remote key and START/STOP
ENGINE button.
Odometer display
Inserting the remote key7
Go to Settings System options Time
settings. Set Auto time to ON (check the
box) and select the correct time zone under
Location.
Turn the thumb wheel on the left steering
wheel lever to display the desired trip odome-
ter.
Holding the end of the remote key with the
base of the key blade, insert the remote key
into the ignition slot as shown in the illustra-
tion and press it in as far as possible.
Press and hold the RESET button on the left
steering wheel lever for at least 1 second to
reset the selected trip odometer5.
Related information
Information displays – introduction (p. 68)
•
CAUTION
Foreign objects in the ignition slot can
impair function or cause damage.
4
The trip odometer will be displayed differently in analog and digital instrument panels
5
6
7
Models with a digital information panel: press and hold RESET for more than approximately 4 seconds to reset all trip computer information
Models with an analog instrument panel: the time will be displayed in the center of the instrument panel
Not necessary in vehicles with the optional keyless drive.
78
* Option/accessory, for more information, see Introduction.
English 
