10 Maintenance and service
Lamp replacement - main beam
The main beam bulb is fitted inside the head-
lamp's larger cover.
Lamp replacement - extra main beam
The extra main beam bulb is fitted inside the
headlamp's larger cover.
Lamp replacement - direction
indicators front
The direction indicator lamp is fitted inside
the headlamp's smaller cover.
10
NOTE
NOTE
Applies to cars with halogen headlamps.
Applies to cars with Xenon headlamps*.
1. Detach the headlamp (p. 361).
2. Remove the small round cover.
3. Pull the bulb holder in order to extract the
bulb.
1. Detach the headlamp (p. 361).
2. Remove the cover (p. 362).
1. Detach the headlamp (p. 361).
2. Remove the cover (p. 362).
4. Remove the blown bulb and fit a new
one. It can only be installed in one way.
3. Detach the bulb by turning anticlockwise
and then pulling straight out.
3. Detach the bulb by pressing the holder
downwards.
5. Fit the bulb holder in the socket and
press until a clicking sound is heard.
4. Unplug the connector from the bulb.
4. Unplug the connector from the bulb.
5. Replace the bulb and align it in the socket
and turn clockwise in order to secure it. It
can only be secured in one position.
5. Fit the new bulb in the socket and snap it
in. It can only be secured in one position.
6. Refit the cover. It must be fitted and
pressed in until a clicking sound is heard.
Reinstall the parts in reverse order.
Reinstall the parts in reverse order.
Reinstall the parts in reverse order.
Related information
Lamps - specifications (p. 366)
Related information
Lamps - specifications (p. 366)
Related information
Lamps - specifications (p. 366)
•
•
•
363
* Option/accessory, for more information, see Introduction.
English 
