10 Maintenance and service
||
Remove the rear cover by screwing one
quarter turn and lifting it away.
1. Lower the battery into the battery box.
2. Move the battery inward and to the side
until it reaches the rear edge of the box.
WARNING
3. Tighten the clamp that holds the battery.
4. Connect the ventilation hose.
10
Connect and remove the positive and neg-
ative cables in the correct order.
> Check that it is correctly connected to
both battery and outlet in the body.
5. Connect the red positive cable.
6. Connect the black negative cable.
Detach the black negative cable.
Detach the red positive cable.
7. Press in the rear cover. (See earlier sec-
tion "Removal".)
Detach the ventilation hose from the bat-
tery.
8. Fit the rubber moulding. (See "Removal".)
Loosen the screw holding the battery
clamp.
9. Align the front cover and secure it with
the clips. (See "Removal".)
For more information on the car's starter bat-
tery, see Starter battery - general (p. 369) and
Jump starting with battery (p. 272).
Move the battery aside.
Lift it up.
Fitting
Open the clips on the front cover and
remove the cover.
Release the rubber moulding so that the
rear cover is free.
372
English 
