Special
Depending on equipment, alternative displays such as sport displays can be shown here.
2
Display area
shows navigation information or situation-dependent pop-ups, for example.
Navigation map in the digital instrument cluster
The digital instrument cluster may be able to display a detailed navigation map, depending on the vehicle equipment.
To do so, press the button to select theNavigation display in the digital instrument cluster.
You can adjust the size of the navigation map to any given size. To select the preferred map size:
—Press the arrow button or on the multifunction steering wheel to zoom in and out.
—Press and hold the
button on the multifunction steering wheel to show or hide the secondary displays.
Secondary displays
1
4
The secondary displays
and
can be configured or hidden independently of each other. Various driving data,
navigation information or information on audio playback or the mobile phone interface can be displayed in the
secondary displays. Proceed as follows to select the secondary displays:
—Use the or button to select the left-hand or right-hand secondary display area.
—Use the arrow keys or to select your preferred secondary display.
—Press the
button to confirm your selection.
Rev counter
Rev counter
The start of the red zone on the dial indicates the maximum engine speed that may be used in each gear when the
engine is warm and after it has been run in properly.
You should change up a gear or move the selector lever toD/S or lift your foot off the accelerator before the needle
reaches the red zone.
NOTICE
● When the engine is cold, avoid high engine speeds, driving at full throttle and overloading the engine.
● The needle on the rev counter should only briefly point into the red area, as engine damage may otherwise be
incurred.
Changing up a gear early will help to save fuel and reduce engine
noise.
23
English 
