Operation using the wiper lever
Fig. 1 On the right of the steering column: Buttons on the
wiper lever (illustration).
If any priority 1 warning reports are being displayed, you will be unable to open any menus. Some warnings can be
1
confirmed and switched off with the → Fig. 1
button.
Selecting a menu or information display
1. Switch on the ignition.
2. Personalisation: select user.
1
3. If a message or the vehicle pictogram is displayed, press the→ Fig. 1
2
button, several times if required.
4. Hold down the rocker switch→ Fig. 1
to display the menus (→ Instrument cluster menus) or to return to
the menu selection from a menu or an information display.
5. To browse through the menus, press the rocker switch up or down.
1
6. To open the menu or information display shown, press→ Fig. 1
or wait until the menu or information
display opens automatically after a few seconds.
Making settings in menus
2
1. In the menu displayed, press the rocker switch→ Fig. 1
on the wiper lever upwards or downwards until the
desired menu option is marked. A frame appears around the selected option.
1
2. Press button → Fig. 1
is active.
to make the required changes. A tick indicates that the particular system or function
Returning to the selection menu
Select the Back menu option to exit any menu.
If warning messages about malfunctions are displayed when the ignition is switched on, it may not be
possible to adjust some settings as described, or the information display may appear differently. If this is the
case, take the vehicle to a qualified workshop to have the malfunction rectified.
42
English 
