(around 1,491 miles) and cannot be cancelled.
Average speed display
The average speed is displayed after around 100 metres(around 328 ft).
Setting the speed warning
Vehicles without multifunction steering wheel:
1. Select the displayWarning at --- km/h or Warning at --- mph.
2. Press the
button on the wiper lever to save the current speed and activate the warning.
3. Within approximately five seconds, set the speed using the rocker switch
on the wiper lever. Then press
the
button or simply wait a few seconds. The speed is now saved and the warning is activated.
button again. The stored speed will be deleted.
4. To deactivate, press the
Vehicles with multifunction steering wheel:
1. Select the displayWarning at --- km/h or Warning at --- mph.
2. Press the
button on the multifunction steering wheel to save the current speed and activate the warning.
3. Within approximately five seconds, set the speed using the buttons or on the multifunction steering
wheel. Then press the
activated.
button or simply wait a few seconds. The speed is now saved and the warning is
button again. The stored speed will be deleted.
4. To deactivate, press the
The warning can be set for speeds from 30 km/h(18 mph) to 250 km/h (155 mph).
Some settings can be saved in the user accounts of the personalisation function and can therefore change
automatically when the user account is changed (→ Personalisation).
Warning and information messages
The system runs a check on certain components and functions in the vehicle when the ignition is switched on or
while the vehicle is in motion. Malfunctions are indicated by red and yellow warning symbols with information
messages on the instrument cluster display. An acoustic warning is also given in certain cases. What the information
messages and symbols look like can vary depending on the version of the instrument cluster.
In addition, a list of current malfunctions can be opened manually. To do so, chooseVehicle status or Vehicle in the
menu (→ Menus and information displays).
Priority 1 warning message
The red central warning lamp flashes or lights up, in some cases together with acoustic warnings or additional
symbols. Do not drive on! Danger. Check the fault and correct the cause. Seek expert assistance if necessary.
Priority 2 warning message
The yellow central warning lamp flashes or lights up, in some cases together with acoustic warnings or additional
symbols. Malfunctions and insufficient service fluids can damage the vehicle and cause it to break down. Check the
fault as soon as possible. Seek expert assistance if necessary.
Reference to information in the owner's manual
31
English 
