Main displays
Possible displays in the main display area of the digital instrument cluster
A range of information can be shown in the main display of the digital instrument cluster, depending on the vehicle
equipment (→ Digital instrument cluster):
—Open doors, bonnet and boot lid.
—Warning and information messages
—Range.
—Date and time (→ Clock).
—Radio and navigation information.
—Outside temperature
—Selector lever position for automatic gearbox.
—Gear-change indicator (→ Gear-change indicator).
—Service interval display (→ Service interval display).
—Speed warning for winter tyres
—Maximum speed limit.
—Start/stop system status display .
—Road signs detected by the Dynamic Road Sign Display system (→ Dynamic Road Sign Display).
—With some equipment levels: Status display for Active Cylinder Management(ACT) (→ Driving economically).
—Economical mode
—Engine code (EC)
.
—Display of driver assist systems.
—Personalisation: Welcome (→ Personalisation).
—Display radiator fan lag.
Open doors, bonnet and boot lid
The display indicates if any doors, the bonnet or boot lid are open once the vehicle has been unlocked and while the
vehicle is in motion. An acoustic warning is also given in some cases.
Selector lever position for the automatic gearbox
The engaged position and, depending on the gearbox program, the engaged gear are shown both on the selector
lever and on instrument cluster display. The gear shift pattern is displayed in the instrument cluster when the brake
or selector lever is operated.
Outside temperature display
If the outside temperature drops below approximately +4°C(+39°F), the outside temperature display shows a
symbol. This symbol remains lit until the outside temperature rises above +6°C (+43°F) .
In the following situation, the temperature displayed may be higher than the actual outside temperature as a result
of the heat radiated from the engine.
—When the vehicle is stationary.
—When the auxiliary heater is being used.
—When travelling at very low speeds.
26
English 
