Get Instrument cluster -> Secondary displays Guide for Volkswagen Caddy SUV Fifth Generation (2020-2025)

Some displays in the instrument cluster may be overridden by sudden alerts, e.g. incoming telephone

calls.

Depending on the vehicle equipment level, some settings and displays may also appear in the Infotainment

system.

If several warning reports are detected, the symbols will appear for several seconds, one after another. The

symbols will continue to appear until the faults are rectified.

If warning messages about malfunctions are displayed when the ignition is switched on, it may not be

possible to adjust some settings as described, or the information display may appear differently. If this is the

case, take the vehicle to a qualified workshop to have the malfunction rectified.

Secondary displays

Secondary display options for the digital instrument cluster

You can configure and show additional displays in the secondary display area (→ Digital instrument cluster):

—Multifunction displays, e.g. current fuel consumption, average fuel consumption, driving time, distance covered,

and average speed.

—Operating temperatures.

—Date and time (→ Clock).

—Telephone.

—Audio.

—Compass display

—Destination information.

—Navigation information.

Multifunction displays

There are several options for showing driving data in the secondary display area (→ Digital instrument cluster).

Different driving data can be selected depending on the vehicle equipment level. The driving data displayed depend

on the current driving behaviour, the vehicle status (e.g. particulate filter regeneration) and the current driving

situation (e.g. urban traffic, motorway journeys). The driving data are calculated as an average value over sections of

varying length. Consequently, the value currently displayed may differ from the actual average value.

Resetting multifunction displays

— Press the or button.

—Use the arrow keys or to select the corresponding secondary display in the configuration menu.

An arrow or after the entry in the configuration menu indicates that a submenu is available.

—In the submenu, select Reset data and press the

button to confirm.

The memory will automatically be reset to “Since start” if the journey is interrupted for more than two hours.

The “Since refuelling” memory is reset after refuelling. The “Long-term” memory is not reset automatically.

The memory collects driving data for up to 19 hours and 59 minutes or 99 hours and 59 minutes of driving

time or 1,999.9 km or 9,999.9 km distance covered. The memory is deleted if one of these maximum values is

exceeded. The maximum values vary depending on the instrument cluster version.

Operating temperatures

The following operating temperatures are displayed in theOperating temperatures secondary display, depending on

the equipment:

—Engine oil.

—Coolant.

—Gearbox.

Telephone

If the Telephone secondary display is activated and a mobile telephone is connected via Bluetooth®, the digital

instrument cluster display shows the Bluetooth symbol .

In addition, the symbol shows the charge level of the mobile telephone battery.

An arrow or after the entry in the configuration menu indicates that a submenu is available.

The submenu displays a list of recent telephone calls and allows you to call back the displayed contacts.

Compass display

The current direction of travel(blue arrow) is shown on a diagram of your vehicle alongside a compass when the

Compass secondary display is activated.

Destination information

The Destination information secondary display shows the estimated travel time and the distance to your destination

in km when route guidance is activated.

Navigation information

The Navigation information secondary display shows the direction of travel using an arrow when route guidance is

active.

An arrow or after the entry in the configuration menu indicates that a submenu is available.

The submenu contains your home address and a list of recent destinations. You can start route guidance from here by

pressing the

button.

Some settings can be saved in the user accounts of the personalisation function and can therefore change

automatically when the user account is changed (→ Personalisation).

Driving data display (multifunction display)

The driving data display(multifunction display) shows various travel and fuel consumption data.

The multifunction display shows travel and fuel consumption data.

Different driving data can be selected depending on the vehicle equipment level. The driving data displayed depend

on the current driving behaviour, the vehicle status (e.g. particulate filter regeneration) and the current driving

situation (e.g. urban traffic, motorway journeys). The driving data are calculated as an average value over sections of

varying length. Consequently, the value currently displayed may differ from the actual average value.

Switching between displays

Vehicles without multifunction steering wheel:

—Press the rocker switch

on the wiper lever (→ Operation using the wiper lever).

Vehicles with multifunction steering wheel:

—Press the or button (→ Operation using the multifunction steering wheel).

Switching memory

Vehicles without multifunction steering wheel:

—Press the

button in the wiper lever (→ Operation using the wiper lever).

Vehicles with multifunction steering wheel:

—Press the

button on the multifunction steering wheel (→ Operation using the multifunction steering wheel).

Since start memory

The memory will be deleted if the journey is interrupted for more than two hours.

Since refuelling memory

Display and storage of the collected driving and consumption values. The memory is deleted when the tank is refilled

Long-term memory

The memory collects driving data for up to 19 hours and 59 minutes or 99 hours and 59 minutes of driving time or

1999.9 km (miles) or 9999.9 km (miles) distance covered. The memory is deleted if one of these maximum values is

exceeded. The maximum values vary depending on the instrument cluster version.

Deleting driving data memories

Select the memory that you wish to delete.

Vehicles without multifunction steering wheel:

—Press the

button in the wiper lever (→ Operation using the wiper lever).

Vehicles with multifunction steering wheel:

—Press the

button on the multifunction steering wheel (→ Operation using the multifunction steering wheel).

Selecting displays

You can select which driving data you want to display in the vehicle settings in the Infotainment system (→ Vehicle

settings menu).

Average consumption display

The average fuel consumption is displayed after approx. 300 metres(around 984 ft).

Fuel range display

Rough estimate of the distance that the vehicle can still travel in km(miles) if you maintain the same driving style.

SCR range or Range display

Approximate calculation of the distance in km(miles) that the vehicle can still travel with the current AdBlue® level

under the current driving conditions. This display appears only when the remaining range reaches approx. 2,400 km

(around 1,491 miles) and cannot be cancelled.

Average speed display

The average speed is displayed after around 100 metres(around 328 ft).

Setting the speed warning

Vehicles without multifunction steering wheel:

1. Select the displayWarning at --- km/h or Warning at --- mph.

2. Press the

button on the wiper lever to save the current speed and activate the warning.

3. Within approximately five seconds, set the speed using the rocker switch

on the wiper lever. Then press

the

button or simply wait a few seconds. The speed is now saved and the warning is activated.

button again. The stored speed will be deleted.

4. To deactivate, press the

Vehicles with multifunction steering wheel:

1. Select the displayWarning at --- km/h or Warning at --- mph.

2. Press the

button on the multifunction steering wheel to save the current speed and activate the warning.

3. Within approximately five seconds, set the speed using the buttons or on the multifunction steering

wheel. Then press the

activated.

button or simply wait a few seconds. The speed is now saved and the warning is

button again. The stored speed will be deleted.

4. To deactivate, press the

The warning can be set for speeds from 30 km/h(18 mph) to 250 km/h (155 mph).

Some settings can be saved in the user accounts of the personalisation function and can therefore change

automatically when the user account is changed (→ Personalisation).

Warning and information messages

The system runs a check on certain components and functions in the vehicle when the ignition is switched on or

while the vehicle is in motion. Malfunctions are indicated by red and yellow warning symbols with information

messages on the instrument cluster display. An acoustic warning is also given in certain cases. What the information

messages and symbols look like can vary depending on the version of the instrument cluster.

In addition, a list of current malfunctions can be opened manually. To do so, chooseVehicle status or Vehicle in the

menu (→ Menus and information displays).

Priority 1 warning message

The red central warning lamp flashes or lights up, in some cases together with acoustic warnings or additional

symbols. Do not drive on! Danger. Check the fault and correct the cause. Seek expert assistance if necessary.

Priority 2 warning message

The yellow central warning lamp flashes or lights up, in some cases together with acoustic warnings or additional

symbols. Malfunctions and insufficient service fluids can damage the vehicle and cause it to break down. Check the

fault as soon as possible. Seek expert assistance if necessary.

Reference to information in the owner's manual

Instrument cluster -> Secondary displays for Your Volkswagen Caddy SUV Fifth Generation (2020-2025)

Related Topics

Instrument cluster

Popular Owner Manuals

Latest Owner Manuals