Fig. 3 In the left side panel: Remove the bulb holder.
The actions should only be carried out in the specified order:
1
1. Pull off the connector in the direction of the arrow→ Fig. 2
1
.
2. Loosen three bolts with the screwdriver→ Fig. 3
. If necessary, use a suitable interchangeable blade.
3. Remove the bulb holder→ Fig. 3.
4. Replace defective bulbs with a new bulb of the same type.
Fitting the tail light cluster
The actions should only be carried out in the specified order:
1. Carefully insert the bulb holder→ Fig. 3 into the tail light cluster.
1
2. Secure the bulb holder on the tail light cluster using the three screws→ Fig. 3
.
3. Check that the bulb holder is positioned correctly and securely.
1
4. Fit the connector on the bulb holder→ Fig. 2
.
5. Insert the tail light cluster into the opening in the vehicle body and carefully push it into the holder→ Fig. 1.
1
6. Tighten the securing bolts fully → Fig. 1
.
7. Check that the tail light cluster is positioned correctly and securely.
8. Close the boot lid or wing doors (→ Boot lid).
Changing the side turn signal bulb
454
English 
