Self-help -> Cleaning and replacing wiper blades for Your Volkswagen Caddy SUV Fifth Generation (2020-2025)

Cleaning and replacing wiper blades  
Fig. 1 On the windscreen: Changing the windscreen wiper  
blades.  
Fig. 2 At the rear of the vehicle: Changing the rear window  
wiper blade.  
The factory-fitted wiper blades are coated with graphite. The graphite coating ensures that the wiper blade moves  
quietly over the windscreen. If the graphite coating is damaged, the windscreen wiper will become louder.  
Check the condition of the wiper blades on a regular basis.Rubbing wiper blades should be changed if damaged or  
cleaned if dirty  
.
Damaged wiper blades should be replaced immediately. Windscreen wiper blades can be bought from a qualified  
workshop.  
Cleaning wiper blades  
Move the wiper arms to the service position before lifting (→ Wiper blades).  
When lifting a wiper arm, hold itonly in the area of the wiper blade mounting.  
Clean the wiper blades carefully using a damp sponge→  
Carefully place the wiper arms back onto the windscreen.  
.
Changing the windscreen wiper blades  
Move the wiper arms to the service position before lifting (→ Wiper blades).  
When lifting a wiper arm, hold itonly in the area of the wiper blade mounting.  
Press and hold the release button and simultaneously pull off the wiper blade in the direction of the arrow  
447  
1
→ Fig. 1  
.
Insert a new wiper blade with thesame length and designonto the wiper arm. Push it on until it engages.  
Place the wiper arms carefully back onto the windscreen.  
Changing the wiper blade for the rear window  
When lifting a wiper arm, hold itonly in the area of the wiper blade mounting.  
Lift and fold back the wiper arm.  
1
Press and hold the release button→ Fig. 2  
.
A
Tilt the wiper blade in the direction of the wiper arm→ Fig. 2  
(arrow) and pull it off in the direction of the  
B
arrow  
at the same time. You may need to use some force to do this.  
Insert a new wiper blade with thesame length and designonto the wiper arm in the opposite direction of the  
B
A
arrow. Push it on until it engages → Fig. 2  
. The wiper blade must be in the folded back position  
(arrow).  
Carefully place the wiper arm back onto the rear window.  
WARNING  
Worn or dirty wiper blades reduce visibility and increase the risk of accidents and severe injuries.  
Always change windscreen wiper blades if they are damaged or worn and no longer clean the windscreen  
properly.  
NOTICE  
Damaged or dirty windscreen wipers can scratch the windscreen.  
Do not use any detergents containing solvents, hard sponges or other sharp objects, as they can damage the  
graphite coating of the wiper blades during cleaning.  
Do not use nail varnish remover, paint thinner or similar products to clean the windows.  
Introduction  
Before changing bulbs, check whether a bulb or an LED light unit has failed. You can normally change bulbs yourself.  
If the exterior lighting is realised using LED technology (depending on model and vehicle equipment), it is not possible  
for you to change the LED light units or individual LEDs yourself. If some LEDs fail, this may be an indication that  
more LEDs are on the point of failure. If this happens, have the lights checked and renewed if necessary at a qualified  
workshop.  
You should keep a box with spare light bulbs for the lights that ensure the vehicle is roadworthy in the vehicle at all  
times. Spare bulbs are available from Volkswagen Commercial Vehicles dealers. In some countries it is a legal  
requirement to have these spare bulbs in the vehicle.  
It may be illegal to drive with a defective bulb in the exterior lighting.  
Additional bulb specification  
Some bulbs in headlights or in tail light clusters might have factory specifications that are different to standard bulbs.  
The designation is inscribed on the bulb, either on the glass part or on the base.  
WARNING  
Accidents will occur if roads are not sufficiently illuminated and other road users have difficulty seeing the vehicle,  
or cannot see it at all.  
448