Get Crankshaft,pistons -> 2.2 Crankshaft seal (pulley side) - replace Guide for Volkswagen Fox SUV Second Generation (2003-2021)

FOX 2004 ➤

3 - Cyl. injection engine - Edition 12.2009

2.2

Crankshaft seal (pulley side) - replace

Special tools and workshop

equipment required

♦ Puller -3203-

♦ Torque wrench - 40 to 200

Nm (enc. 1/2") -VAG 1332-

♦ Assembly device -T10117-

2.2.1

Removal

– Remove the Poly-V belt ⇒ page 13 .

– Remove the fastening bolts from the crankshaft pulley. Immo‐

bilise crankshaft pulley with the Spanner -3415- and -3415/1- .

– Remove centre bolt and crankshaft pulley.

– Turn inner part of Puller -2085- three turns (around 5 mm) from

external part and lock with knurled bolt.

2. Engine block, seals

FOX 2004 ➤

3 - Cyl. injection engine - Edition 12.2009

– Lubricate puller threaded head, seat it and thread it as firmly

as possible onto the seal.

– Loosen the knurled bolt and turn the inner part against the

crankshaft until the seal is extracted.

2.2.2

Installation

– Seat Sleeve -T 10117/2- on trunnion and move seal.

– Remove Sleeve -T 10117/2- .

– Press seal with Pressure sleeve -T10117- up to control box

stop, through uniform tappings.

Resume the installation in the removal reverse order.

Rep. Gr.13 - Crankshaft, pistons

Crankshaft,pistons -> 2.2 Crankshaft seal (pulley side) - replace for Your Volkswagen Fox SUV Second Generation (2003-2021)