Get Crankshaft,pistons -> 2.3 Crankshaft seal (flywheel side) - replace Guide for Volkswagen Fox SUV Second Generation (2003-2021)

FOX 2004 ➤

3 - Cyl. injection engine - Edition 12.2009

2.3

Crankshaft seal (flywheel side) - replace

Special tools and workshop

equipment required

♦ Extraction hook -2086-

♦ Torque wrench - 5 to 50 Nm

(enc. 1/2") -VAG 1331-

♦ Torque wrench - 40 to 200

Nm (enc. 1/2") -VAG 1332-

♦ Insertion device -T10122-

Note

♦ In order to better represent the operation sequences, tthey are

carried out with the engine removed.

♦ The operation sequences with both engine and transmission

removed are identical.

2.3.1

Removal

– Remove clutch assembly and engine flywheel.

2. Engine block, seals

FOX 2004 ➤

3 - Cyl. injection engine - Edition 12.2009

– Remove seal with the Extraction hook -2086 - .

2.3.2

Installation

Note

Only remove support ring from seal right before its installation.

– Join Assembly bearing shells -T 10122/1- and -T10122/2- .

– Move the seal -A- on Assembly bearing shell -T 10122/2- up

to the stop.

– Separate both assembly bearing shells.

– Install Assembly bearing shell -T 10122/2- with seal on crank‐

shaft flange.

– Press the seal with the Pressure bearing shell -T 10122/3- to

the stop.

Resume the installation in the removal reverse order.

Rep. Gr.13 - Crankshaft, pistons

Crankshaft,pistons -> 2.3 Crankshaft seal (flywheel side) - replace for Your Volkswagen Fox SUV Second Generation (2003-2021)