Get Infotainment system -> Navigation Guide for Volkswagen Touran 4 Door Third Generation (2022-2025)

or

Videos.

Playlists.

Albums.

Artists.

or

Genres.

Podcasts.

Audiobooks.

Video replay symbols

Replay video in full-screen mode.

Minimize replay.

Introduction

The current vehicle position is determined by a global satellite system. In order to enable optimum navigation to your

destination, all measured values and possible traffic information are compared with the available map material.

Acoustic navigation announcements and graphic displays lead you to your destination.

Depending on the country, it may not be possible to select some Infotainment system functions on the screen when

driving above a certain speed. This is not a malfunction, but rather compliance with legal regulations.

If you sell or lend the vehicle, Volkswagen recommends resetting the Infotainment system to the factory settings

(→ First steps in the Infotainment system). This only deletes all personal data, such as information about navigation.

Please note additional information on this in the chapter on the online services, which are available depending on the

country .

WARNING

If settings are adjusted, destinations entered and changes made to navigation information while driving, the driver

may be distracted and cause accidents and injuries.

● Always drive attentively and responsibly.

● Only adjust settings, enter destinations, or change navigation information when the vehicle is stationary.

If you missed a turn on your route, the navigation system may recalculate the

route.

The quality of the driving directions depends on the available navigation data and, depending on the country,

any reported traffic incidents.

Depending on the vehicle and country, before using the online services of the navigation, select “Online

mode” and a mode with location data in the privacy settings (→ Privacy settings).

In order to use online services, e.g. Online Traffic Information, the corresponding online service needs to be

activated and, depending on the country, the privacy settings need to be adapted . Only then can online traffic

information, for example, be displayed in the navigation system. If no online traffic information is available,

the following symbol will be displayed depending on the vehicle equipment:

.

407

Navigation restrictions

If the Infotainment system cannot receive data fromGPS

satellites, for example in a tunnel, navigation will still be possible using the vehicle's sensors.

In areas that are not digitized or only partially digitized in the Infotainment system memory, the Infotainment system

will still try to provide route guidance.

If navigation data is missing or incomplete, the vehicle position may not be determined accurately. This may result in

navigation that is not as accurate as usual.

The road layout is subject to constant changes, e.g. construction sites. Using outdated navigation data can lead to

errors or uncertainty when using route guidance.

Function descriptions

Voice guidance

Navigation messages are acoustic driving directions for the current route. The type and frequency of navigation

messages depends on the settings and the driving situation, such as the start of the route guidance and whether you

are driving on a highway or roundabout.

If the destination cannot be reached exactly, for example because it is not in a digitized area, there will be a

navigation announcement that the Destination area has been reached. Messages about the direction and distance to

your destination will also be displayed on the screen.

Depending on the vehicle equipment and in some countries, reported traffic incidents on the route are announced

during dynamic route guidance. There will be an additional navigation announcement if the route is recalculated due

to a traffic incident or a change in driving style.

You can adjust or mute the volume during a traffic announcement. All other navigation announcements will be given

at that volume or will be muted.

Navigation messages will not be given if the Infotainment system is

muted.

Adapting the Navigation Map

To ensure an optimum view, you can also adapt the navigation map and map view using enhanced finger movements.

Moving the navigation map

Recommendation: Use index finger.

1. Move the navigation map with your finger.

Zooming in or out on the map view

Recommendation: Use index finger.

1. Tap and hold the map twice in a row.

2. To zoom out of the map view, move your finger upwards.

Or: to zoom in on the map view, move your finger downwards.

Zooming in or out on the map view

Recommendation: Use thumb and index finger.

1. Tap and hold the map with two fingers at the same time.

2. To zoom out of the map view, slowly slide your fingers toward one another.

408

Or: to zoom into the map view, slowly slide your fingers away from one another.

Tilting the map view

Recommendation: Use index and middle finger.

1. Tap and hold the map with two fingers at the same time, held horizontally next to each other.

2. To tilt the map view to the front, move your fingers upwards.

Or: to tilt the map view to the back, move your fingers downwards.

Rotating the map view

Recommendation: Use thumb and index finger.

1. Tap and hold the map with two fingers at the same time.

2. Turn your fingers clockwise or anti-clockwise to turn the map view.

Route plan

Multiple destinations can be defined in succession in the route plan. The starting point is always the vehicle position

as determined by the Infotainment system. The route plan contains information about relevant events, such as

waypoints and destination suggestions, if the relevant data is available to the navigation system. You can move

stopovers to another position within the list. Tapping an event will open a dialog box with additional options. The

options available depend on the event and the current settings.

Opening and closing the route plan

1. Tap the route plan to open.

2. To close the route plan, tap .

3. To stop the route guidance to the destination or waypoint, tap next to the destination in the route plan.

Editing Route Guidance in the Route Plan

To edit route guidance, move the stopovers or the destination in the route plan.

1. Tap and hold the desired destination until it is visibly highlighted.

2. Move the destination to the desired position and release it.

The route will be recalculated.

Additional dialog box in the route plan

Tapping the route plan entries may cause a dialog box to open with additional options for these entries. The options

available depend on the entry that is tapped.

Functions in the split screen:

Display on map

Displays the selection on the map.

Direct route

Starts direct route guidance.

Add waypoint

Adds a waypoint to the route guidance.

Delete

Delete waypoint from route guidance.

409

Avoid

Avoid traffic disruptions. The route will be recalculated.

Stop route guidance

Ends the current route guidance.

Closing an additional dialog box in the route plan

1. Tap a free area outside of the additional window.

Setting preferred POI categories

The system offers different points of interest, e.g. gas stations, using the quick select symbol when entering

destinations, in the route plan and on the map. You can prioritize how these symbols are displayed under

function settings Preferred POI categories. The system also automatically learns your preferred categories.

Basic

Saved data

In order to enable you to enter destinations quickly and to optimize route guidance, the Infotainment system saves

certain data, such as frequently driven routes and positioning data.

Delete saved data

1. Tap

Basic functions Delete usage pattern.

2. Tap confirm to delete the data.

Learning usage patterns

While driving, the Navigation system saves routes traveled and destinations reached in order to create automatic

destination suggestions. Destinations are learned with reference to the time of day and the day of the week.

The navigation system can suggest pre-learned routes. Selecting one of the suggested routes will cause route

guidance to begin.

The route guidance follows the selected route until you deviate from it. The route will then be recalculated and will

lead back to the selected route via the most direct path.

Relevant traffic disruptions are taken into consideration in route guidance. If an alternative route and the navigation

data are available, relevant disruptions will be avoided.

If you are driving a pre-learned route without active route guidance, the destination is added to the route plan. Route

guidance does not need to be actively started for a journey to a pre-learned destination. You are warned about traffic

disruptions if necessary and an estimated arrival time is displayed.

You can activate or deactivate this function at any time as well as delete the saved data for this function.

Activating or deactivating “Learn usage pattern”

1. To open this function's settings, tap

2. Tap Learn usage pattern.

Basic function settings.

Opening Suggested Routes

1. Tap

.

Deleting saved “Learn usage pattern” data

1. To open this function's settings, tap

Basic function settings.

410

2. Tap Delete usage pattern.

Functions and Symbols

Functions

The functions of the navigation system depend on the vehicle equipment and are not available in all countries.

—Entering a destination and route calculation.

—Simultaneous display of two navigation maps(screen and instrument cluster).

—Personal destinations.

—3D City Maps.

—Online Map Update.

—Online Traffic Information.

Symbols

The symbols depend on the vehicle equipment and are not available not in all countries and may look different

depending on the Infotainment system.

General symbols

1. To open the main menu, open the app overview and tap (→ Overview of Infotainment system).

Or: press NAV (→ Overview of Infotainment system).

Destination search.

Open navigation map.

Open saved addresses or contact list for the connected cell phone.

Display destination memory.

Destinations and stopovers along the current route.

Personal destination suggestions (home address, work address, favoritePOI

s nearby).

or

Opening the settings.

Symbols on the map

The function keys and displays shown depend on the settings and the current driving situation.

Depending on the country, symbols for traffic information, e.g. traffic disruptions, andPOI

s, e.g. gas stations, are displayed on the map if the data is available to the navigation system (→ Traffic information).

Current position.

Map scale.

Determine driving direction and map tilt, align map.

411

Fully automatic map mode(orientation in direction of travel, position, zoom and tilt).

Display route options.

Display dialog box with additional options. If necessary, a map menu with settings for navigation and

navigation announcements.

Symbols in the route plan

Display current position.

Destination for the current route guidance.

Ends the current route guidance.

Close route plan.

Symbols in the dialog box

1. To open the additional window, tap on

.

Display route overview and alternative routes to the current route guidance.

Repeats the last navigation announcement.

Mute or adjust volume of navigation instructions.

Additional symbols

Open route information.

In the destination search: open detailed destination input for an address. In the contact list: open address.

Traffic disruptions

Depending on the country, traffic disruptions are displayed on the map if the data is available to the navigation

system (→ Traffic information).

1. Tap a traffic disruption to open a dialog box with details (→ Navigation).

Traffic jam.

Accident.

Ice.

Road closed.

412

Slip hazard.

Danger.

Construction zone.

Strong wind.

Inputting destinations and starting route guidance

Depending on the vehicle equipment, different functions are available for inputting destinations. Some functions are

only available in some countries.

The various functions for inputting destinations are located in the navigation system main menu. You can further

restrict your search with specific suggestions in the results list, e.g. “nearby”.

For further information about symbols on the Infotainment system screen, see (→ Navigation) in this Owner's

Manual.

Enter address

Start route guidance by entering an address. During input, the navigation system suggests already known

destinations. You can also enter a new, unknown address for route guidance.

When inputting the address, input the name of the destination, not the postcode of the

destination.

Selecting the destination and starting the navigation system

1. Tap

.

2. Enter the destination address and select your desired destination.

Or: tap

and enter the address via the input screen.

3. Tap Route.

Quick start

1. Tap

.

2. Enter the address of the destination, tap the desired destination and hold for a few seconds.

Enter the destination as accurately as possible. If there is an error in the destination entered, route guidance

cannot take place or may lead to the wrong destination.

Destination suggestions

Navigation uses saved data such as your last destinations, learned destinations, favorites, home address and work

address to provide you with route guidance.

Selecting the destination and starting the navigation system

1. Tap

.

2. Tap on the desired destination.

The route guidance starts automatically.

Last destinations

413

The navigation system saves up to ten of the most recent destinations to make them available for route guidance. A

new destination automatically overwrites the oldest destination.

Selecting the destination and starting the navigation system

1. Tap

.

2. Tap on the desired destination.

3. Tap Route.

Quick start

1. Tap

.

2. Tap and hold the preferred destination for a few seconds.

Favorite Destinations

You can save up to 50 journey destinations as favorites.

Saving a journey destination as a favorite

1. While entering a destination, tap on in the additional window.

Selecting the destination and starting the navigation system

1. Tap

.

2. Tap on the desired destination.

3. Tap Route.

Quick start

1. Tap

.

2. Tap and hold the preferred destination for a few seconds.

Selecting on the map

The navigation map contains active areas at many points which are suitable for the input of a destination. To enter a

destination, tap on your preferred position or preferred location on the map. If map data is available at this point, you

can launch route guidance.

Entering a destination via the navigation map is dependent on data status and not possible for all positions.

Use the Offroad navigation system to enter a destination to a selected destination point with unknown data

→ Offroad navigation.

Offroad navigation

The Offroad navigation system calculates routes to selected destinations with unknown data. If the destination is not

located on a known road or at a known position, the navigation system will calculate the route up to the next point on

the known road and then complete the route to the destination using a straight line.

Starting the navigation

1. Tap

.

2. Press and slide the map view until you can select your desired position. You can operate the navigation map

using extended finger touches (→ Navigation).

414

3. Tap the preferred destination or any destination point on the map without positioning data.

4. Tap Route.

Using a contact's address data

Start route guidance via the saved address data for a contact. You cannot use contacts for whom you have not saved

any address data for route guidance.

Starting the navigation

1. Tap

.

2. Tap on the preferred contact and address data.

3. Tap Route.

If the address data for a contact is out of date, the stored address will be used when route guidance is

activated and may take you to the wrong destination.

—When starting route guidance, make sure that the stored address for a contact is up to date. The phonebook must

be updated completely in the Infotainment system (→ Phone interface).

—Wait until the phonebook update is complete in the Infotainment system (→ Phone

interface).

Navigation data

The Infotainment system is equipped with an internal navigation data storage medium. Depending on the country,

the required navigation data may already be installed.

The Infotainment system always requires up-to-date navigation data to ensure that route guidance can be

implemented correctly and that the functions provided are fully available.

NOTICE

If you use outdated navigation data, there may be adverse effects on the navigation system. It may not be possible

to determine up-to-date routes, or route guidance may guide you to an incorrect destination.

● Always ensure that your navigation data is kept up-to-date.

Navigation Data Online – Additional Information

Regions in the navigation data that you do not use can be removed from the system under certain circumstances, e.g.

navigation data memory low on space. If you subsequently need these regions again at a later time, the navigation

system will download them again on request. No contract for mobile online services is required for this purpose. This

service depends on the vehicle equipment and is only available in some countries.

1. Switch the ignition on.

2. Establish an Internet connection if you have not already done so.

3. Depending on the country, also select the “Share my position” mode in the privacy settings (→ Privacy settings).

Users who use the vehicle as an anonymous guest will need to reselect the privacy settings each time the

vehicle starts (→ Privacy settings).

Updating navigation data manually

Up-to-date navigation data for larger regions, such as Western Europe, can be downloaded online at

www.volkswagen.com and stored on a suitableUSB

data carrier, available to buy in stores. If the Infotainment system is switched off during the process, installation will

be interrupted and it will continue automatically once the system is turned on again.

415

1. Download and save the navigation data onto aUSB

data storage device.

2. Switch the vehicle ignition on.

3. Link the USB

data carrier to the Infotainment system when the vehicle is stationary.

The navigation data for frequently driven regions is automatically updated in the background.

While and after updating the navigation data, no message appears in the Infotainment

system.

If you update the navigation data manually, theUSB

data carrier must remain permanently connected. You will not receive a notification when the update is

complete.

Do not disconnect the

USB

data carrier from the Infotainment system for a few days until the navigation data for visited regions has been fully

downloaded and installed. The installation will start automatically in the background during the journey. Doing so will

cancel the update process.

If you disconnect the data carrier and visit a new region in offline mode, the navigation data is not updated due to the

lack of a USB

data carrier and an Internet connection.

Displaying the map data version

1. Open the app overview and tap

System information.

Traffic information

Reception of traffic information depends on the vehicle equipment and is not available in every country. In order to

be able to use the Online Traffic Information function, you must select the “online mode” and a mode with location

data in the privacy settings (depending on the country)(→ Privacy settings).

The Infotainment system automatically receives detailed traffic information when there is an active Internet

connection. This information is displayed on the map via symbols and color coding on the road network

(→ Navigation)→ Traffic flow display.

Reception of traffic information is possible in some countries if permitted by the privacy settings selected. No

traffic information is received in offline mode (→ Privacy settings).

Traffic disruptions

Traffic disruptions such as traffic jams are displayed on the navigation map as symbols (→ Navigation).

The route plan displays current traffic disruptions if the relevant data is available to the Navigation system.

If route guidance is active, traffic disruptions on the current route will be displayed on the route plan. You can avoid

these traffic disruptions by modifying the route plan.

Avoiding traffic disruptions

1. Tap the traffic disruption.

2. Tap Avoid.

The route will be recalculated.

Only one traffic disruption can be avoided in this manner for each route

guidance.

416

Infotainment system -> Navigation for Your Volkswagen Touran 4 Door Third Generation (2022-2025)

Related Topics

Infotainment system

Popular Owner Manuals

Latest Owner Manuals