Function descriptions
Selecting a Reception Mode
Various stations are available, depending on the reception mode. The available reception modes depend on the
vehicle equipment and are not available in all countries.
1. To open the list of reception modes, tapSource.
2. Select a reception mode, e.g. FM
.
Searching For and Selecting a Station
You can search for and select stations in a variety of ways. The options vary based on the reception mode.
Searching for a Station in SCAN mode
In SCAN mode, the stations in the reception mode are set automatically in succession and played for approx.
five seconds each.
1. To start SCAN mode, tap or
SCAN, depending on the vehicle equipment.
SCAN mode starts and the current station is shown on the display.
The SCAN function key is shown.
2. To select a station, tapSCAN.
SCAN mode stops and the station is tuned.
Selecting a Station Using the Multi-function Steering Wheel
Depending on the vehicle equipment, you can select stations from the station list or favorites using the multi-
function steering wheel.
—To select the previous station, press
on the multi-function steering wheel.
—To select the next station, press on the multi-function steering wheel.
Selecting a Station Using a Frequency Band
1. Open the settings and deactivate the summarized station list in the settings.
2. Select AM
or FM reception mode.
3. To open the frequency band, tap
.
4. Tap the cursor to press and slide to the frequency band and release at the desired frequency.
Or: tap a point on the frequency band. The cursor automatically jumps to the corresponding frequency.
The station at the set frequency will be tuned.
Selecting a station from the station list
Depending on the vehicle equipment, it is possible that the station list must be manually updated if you have left the
area since the last time the station list was opened. In FM
/DAB reception mode, the station list generally updates automatically.
1. Open the station list.
2. Tap the desired station.
The selected station will be tuned.
398