Get Infotainment system -> Operation Guide for Volkswagen Touran 4 Door Third Generation (2022-2025)

Overview of Infotainment system

Fig. 1 Overview of the Infotainment system (general example).

1

2

3

4

5

6

7

8

9

MENU sensor area.

HOME sensor area.

Sensor area for switching the Infotainment system on and off.

Sensor areas for volume.

Function key for main menu.

Control Center.

Screen (touchscreen).

Pages.

Status bar.

Further information and tips for operating the Infotainment system can be found in this Owner's Manual

(→ First steps in the Infotainment system).

1

2

3

MENU sensor area

1. To open the app overview, tap MENU .

HOME sensor area

1. To open the home screen, tap HOME .

Sensor area for switching the Infotainment system on and off

388

1. Tap the sensor area to manually switch the Infotainment system on or off.

4

Sensor areas for volume

1. Tap the sensor areas to adjust the volume.

5

Function key for the main menu

You can configure the position of the function keys (→ First steps in the Infotainment system).

1. To open a main menu, tap the corresponding function key e.g. for the phone interface.

6

Control Center

The control center contains additional function keys for functions and notifications. Displayed functions can be

configured (→ First steps in the Infotainment system).

1. Tap the selection and swipe down to open the control center.

7

Screen (touchscreen)

You can operate the Infotainment system functions via the screen. You will find detailed explanations of the different

finger movements in the quick guide to the Infotainment system, if available.

1. To open the quick guide to the Infotainment system, open the app overview and tap .

8

Pages

Certain menus and functions have multiple pages with different content. The current page is highlighted.

—Tap a selection to switch to a page.

—To switch between pages, swipe left or right on the screen.

Scroll bars (without position numbers)

Certain menus and functions contain additional content above and below the content currently displayed on the

screen.

1. Tap the scroll bar and swipe down or up to display additional content.

Gesture control (without position numbers)

Gesture control can also be activated, depending on the country. If gesture control is activated, this is shown on the

screen.

1. Open the app overview and tap

Screen Hand gesture.

Operating the Infotainment system

389

Fig. 2 Overview of the Infotainment system (general example).

1

2

3

4

5

6

Touch-sensitive fields.

Rotary knob.

Function key for main menu.

Pages.

Control Center.

Menu knob.

Further information and tips for operating the Infotainment system can be found in this Owner's Manual

(→ First steps in the Infotainment system).

1

Touch-sensitive fields

The number and layout of the sensor areas depend on the vehicle equipment.

1. To open a main menu, tap the corresponding sensor area, e.g.PHONE for the phone interface.

— RADIO: radio .

— MEDIA: media .

— PHONE: Phone interface .

— VOICE . The sensor area does not have a function in some countries.

— NAV: Navigation .

— APP: App-Connect . The sensor area does not have a function in some countries.

— SOUND.

— CAR : open the vehicle settings.

390

— MENU : open the app overview.

— HOME : open the home screen.

2

Rotary knob

—Press to switch the Infotainment system on or off.

—Turn left to decrease the volume.

—Turn right to increase the volume.

3

Function key for the main menu

It is not possible to configure the position of the function keys.

1. To open a main menu, tap the corresponding function key e.g. for the phone interface.

4

Pages

Certain menus and functions have multiple pages with different content. The current page is highlighted.

—Tap a selection to switch to a page.

—To switch between pages, swipe left or right on the screen.

5

Control Center

The control center contains additional function keys for functions and notifications. Displayed functions can be

configured (→ First steps in the Infotainment system).

1. Tap and hold the selection and swipe down to open the control center.

6

Menu knob

—Turn to control the list selection.

—Press to confirm a selection.

Screen (touchscreen) (without position numbers)

You can operate the Infotainment system functions via the screen. You will find detailed explanations of the different

finger movements in the quick guide to the Infotainment system, if available.

1. To open the quick guide to the Infotainment system, open the app overview and tap

Scroll bars (without position numbers)

.

Certain menus and functions contain additional content above and below the content currently displayed on the

screen.

1. Tap the scroll bar and swipe down or up to display additional content.

Gesture control (without position numbers)

Gesture control can also be activated, depending on the country. If gesture control is activated, this is shown on the

screen.

1. Open the app overview and tap

Screen Hand gesture.

Personalizing the Infotainment system

391

Fig. 3 Overview of the Infotainment system (general example).

1

2

3

4

5

Touch-sensitive fields.

Rotary knob.

Function key for main menu.

Control Center.

Pages.

Further information and tips for operating the Infotainment system can be found in this Owner's Manual

(→ First steps in the Infotainment system).

1

Touch-sensitive fields

1. To open a main menu, tap the corresponding sensor area, e.g.PHONE for the phone interface.

— HOME : open the home screen.

— MENU : open the app overview (→ First steps in the Infotainment system).

— APP: App-Connect . The sensor area does not have a function in some countries.

— CAR : open the vehicle settings.

2

Rotary knob

—Press to switch the Infotainment system on or off.

—Turn left to decrease the volume.

—Turn right to increase the volume.

3

Function key for the main menu

It is not possible to configure the position of the function keys.

392

1. To open a main menu, tap the corresponding function key e.g. for the phone interface.

4

Pages

Certain menus and functions have multiple pages with different content. The current page is highlighted.

—Tap a selection to switch to a page.

—To switch between pages, swipe left or right on the screen.

5

Control Center

The control center contains additional function keys for functions and notifications. Displayed functions can be

configured (→ First steps in the Infotainment system).

1. Tap and hold the selection and swipe down to open the control center.

Screen (touchscreen) (without position numbers)

You can operate the Infotainment system functions via the screen. You will find detailed explanations of the different

finger movements in the quick guide to the Infotainment system, if available.

1. To open the quick guide to the Infotainment system, open the app overview and tap

Scroll bars (without position numbers)

.

Certain menus and functions contain additional content above and below the content currently displayed on the

screen.

1. Tap the scroll bar and swipe down or up to display additional content.

Gesture control (without position numbers)

Gesture control can also be activated, depending on the country. If gesture control is activated, this is shown on the

screen.

1. Open the app overview and tap

Screen Hand gesture.

Restoring the Infotainment System to Factory Settings

1. Open the app overview and tap Settings Restore factory settings.

When restoring factory settings, the vehicle settings are deleted, and personal data may also be deleted.

Mobile online services can no longer be used in this vehicle. The services can only be used again after

reactivation. If there is a primary user in the vehicle, they will also be deleted and informed of this via e-mail.

Please note additional information on this in the chapter on the mobile online services .

Opening the Quick Guide to the Infotainment System(if available)

Depending on the vehicle equipment, the Infotainment system has a quick guide to operating the Infotainment

system. Further information and tips on operation can be found in the quick guide to the Infotainment system.

1. Open the app overview and tap

.

Switching the Infotainment System On or Off

In the following case, the Infotainment system switches on automatically:

—If the Infotainment system was not previously switched off manually, it will switch on when the ignition is

switched on.

393

The Infotainment system starts at the volume that was last set, as long as this does not exceed the preset maximum

switch-on volume.

In the following cases, the Infotainment system will switch off automatically:

—Vehicles with a starter button: if the driver door is opened when the ignition is not active.

—If you switch on the Infotainment system manually while the ignition is not active, it will switch off after

approximately 30 minutes without user input.

If the Infotainment system is no longer responding, it automatically restarts. If restarting does not work, tap the

sensor area for switching on and off, or press the dial and pressure switch and hold for approx. 15 seconds.

WARNING

During a restart of the Infotainment system, functions such as the Rear View Camera system display, acoustic and

visual warnings of the Park Distance Control and Rear Traffic Alert, the Park Distance Control, the Rear Traffic Alert

and other warning tones may not be available for a short time. This can cause accidents and serious injuries.

● Always stay attentive and do not rely solely on the systems. The driver is always responsible for control of the

vehicle.

● Pay attention to the traffic situation and the vehicle environment when entering and leaving a parking space.

● In a hazardous situation, apply the brakes using the brake pedal.

● Wait until the Infotainment system and the other systems are fully started.

Main Menus in the App Overview

The following main menus may be included as function keys in the app overview:

Ambient lighting, Ambient light .

App-Connect .

Owner's Manual: Digital Manual, if available.

Driver assistance .

Vehicle .

Help: Here, you can find additional information about Infotainment system functions and operation, e.g. the

quick guide (→ First steps in the Infotainment system).

or

Sound (→ First steps in the Infotainment system).

Climate control .

Media .

Navigation .

or

User, User management .

Radio .

Legal.

394

Setup (→ First steps in the Infotainment system).

Auxiliary heater.

Telephone .

Configuring the App Overview

In the app overview, you can configure the layout of the function keys, pages and displays or have them positioned

using standard layout templates. The app overview cannot be configured in all available Infotainment systems.

1. Open the app overview.

2. Tap the function key and hold until the function key is highlighted.

3. Move the function key to the preferred position and release it.

Personalization

Depending on the vehicle equipment, you can personalize function keys and pages (→ First steps in the Infotainment

system).

Depending on the vehicle equipment, you can personalize the Infotainment system to access your favorite and

frequently used functions quicker.

The Infotainment system pages contain tiles for accessing additional menus and functions.

Adjusting tiles

Adjust the tiles and displayed tile functions in the Infotainment system pages in order to manage the Infotainment

system as you wish.

1. Open the app overview.

2. Tap and hold tiles until an additional window appears.

3. Tap the desired function in the additional window. Various functions are available depending on the size of the

tile.

Or: to return to the page, tap any free area of the screen.

There are always at least two pages available. They cannot be removed. Depending on the vehicle equipment,

you can add two further pages. A maximum of four pages can be displayed.

For some tiles, more functions are available than can be seen initially in the additional window. To see all the

functions, swipe up or down in the additional window.

Adjusting the control center

Adjust the Infotainment system Control Center for quicker access to your favorite and frequently used functions.

1. Open the Control Center.

2. Tap and hold the function until an additional window appears.

3. Tap the desired function in the additional window and hold until the function is highlighted.

4. Move the function to the preferred position and release it.

The active function is automatically removed from the control center and added to the additional window.

For the control center, more functions are available than can be seen initially in the additional window. Swipe

to the left or right in the additional window to see all the functions.

395

Opening personalization tips(if available)

Further information and tips on personalization can be found in the digital manual for the Infotainment system.

1. Open the app overview and tap

Adjustment.

System and sound settings

The selection of available settings varies depending on the vehicle equipment and country.

Changing settings

The meanings of the following symbols apply to all system and sound settings.

Changes will be automatically applied when the menu is closed.

,

or

The setting is selected and activated or switched on.

The setting is not selected and deactivated or switched off.

Open the drop-down list.

,

or

Increase the set value.

Reduce the set value.

Go back stepwise.

Go forward stepwise.

Use the slide control to continuously change the set value.

System settings

Depending on the vehicle equipment, the settings for the main menus may also be available in the system settings.

The system settings may include the following functions, information, and setting options:

—Restore factory settings.

—Screen.

—Copyright.

—Data connection.

—Units.

—Configuration assistant.

—Manage mobile devices.

—Voice control.

—Language.

—System information.

—Time and date.

—Wi-Fi

®

.

396

Infotainment system -> Operation for Your Volkswagen Touran 4 Door Third Generation (2022-2025)

Related Topics

Infotainment system

Popular Owner Manuals

Latest Owner Manuals