Advertisement

Advertisement

Ease of use and comfort -> Load retaining partition for Your Citroen Berlingo SUV Third Generation (2018-2025)

Ease of use and comfort  
low position, you can store it folded by sliding it  
towards the backrests of the rear seats.  
To deploy it from the boot, grasp it and unfold  
it to the boot pillars.  
Installation  
The maximum authorised weight on the  
luggage cover shelf is 25 kg.  
Luggage cover  
► The roller can be stored behind row 2 or 3.  
XL  
Removal  
► Remove the roller guides from the rails in  
pillars B.  
► Guide the roller as it reels in.  
► Unlock the roller by pressing one of the  
handles located at the ends of the roller bracket.  
XL  
► Position the left and right ends of the roller in  
the cut-outs A.  
► Pull out the roller until it reaches the boot  
pillars.  
► Insert the roller guides into the rails in the  
pillars B.  
In the 5-seat configuration, it is installed behind  
the second row seats, with the third row seats  
stored folded away.  
In the 7-seat configuration, it is stored behind the  
third row seats.  
Load retaining partition  
In the event of sudden deceleration,  
objects placed on the load space cover  
can turn into projectiles.  
► Depending on version, you can access the  
boot by opening the rear screen in the tailgate  
and attaching the roller guides into the rails in  
the pillars C.  
66  
Ease of use and comfort  
On the floor, behind the front seats, a vertical  
partition protects the driver and front passengers  
against the risk of load movement.  
Steel or glazed partitions separate the loading  
area from the cab.  
Storage compartment  
3
When washing your vehicle, never clean  
the inside directly using a water jet.  
Stowing rings  
Use the stowing rings on the rear floor to secure  
loads.  
There is a compartment in the interior trim of the  
boot in which to store a warning triangle.  
As a safety precaution in case of sharp braking,  
we recommend placing heavy objects as far  
forwards as possible (i.e. near the cab).  
We recommend using the stowing rings on the  
floor to firmly secure the load.  
Recommendations on  
loading  
When washing your vehicle, never clean  
the inside directly using a water jet.  
Warning triangle  
The weight of the load must comply with  
the Gross Train Weight (GTW).  
For more information on Engine technical  
data and towed loads, refer to the  
corresponding section.  
As a safety precaution, before leaving your  
vehicle to set up and install the triangle, always  
switch on the hazard warning lamps and put on  
your high visibility vest.  
If you are using a carrying system (roof  
bars/roof rack), comply with the  
maximum loads associated with this system.  
For more information on Roof bars/Roof  
rack, refer to the corresponding section.  
67