Advertisement

Advertisement

Ease of use and comfort -> Two-position luggage cover shelf (removable) for Your Citroen Berlingo SUV Third Generation (2018-2025)

Ease of use and comfort  
Installation behind row 1  
spring hook to the ring on the corresponding  
strap.  
► Fold down the rear seats.  
► Tighten the straps without raising the bench  
Never use the ISOFIX ring, which is for  
fixing the strap of a child seat with Top  
Tether.  
3
seat.  
Two-position luggage cover  
shelf (removable)  
► Check that the net is hooked and tightened  
correctly.  
Installation behind row 2  
M
M
► Open the covers on the upper mountings 1.  
► Unroll the high load retaining net.  
► Position one end of the net's metal bar in the  
corresponding upper mounting 1, then do the  
same with the other end.  
► Fully extend the straps.  
► Fold or remove the luggage cover.  
► Open the covers on the upper mountings 2.  
► Unroll the high load retaining net.  
► Position one end of the net's metal bar in the  
corresponding upper mounting 2, then do the  
same with the other end.  
► Attach the hook on each of the net's straps  
to the corresponding stowing ring 4 (located on  
the floor).  
It can be installed in two different positions: high  
and low.  
It consists of two sections which can be folded  
back on each other.  
To fold it from the boot, grasp it and fold it  
back on itself up to the rear seats. From the  
► Tighten the straps.  
► Check that the net is hooked and tightened  
correctly.  
► Wind each strap around bar 3 located under  
the front seat cushion (row 1), then secure each  
65  
Ease of use and comfort  
low position, you can store it folded by sliding it  
towards the backrests of the rear seats.  
To deploy it from the boot, grasp it and unfold  
it to the boot pillars.  
Installation  
The maximum authorised weight on the  
luggage cover shelf is 25 kg.  
Luggage cover  
► The roller can be stored behind row 2 or 3.  
XL  
Removal  
► Remove the roller guides from the rails in  
pillars B.  
► Guide the roller as it reels in.  
► Unlock the roller by pressing one of the  
handles located at the ends of the roller bracket.  
XL  
► Position the left and right ends of the roller in  
the cut-outs A.  
► Pull out the roller until it reaches the boot  
pillars.  
► Insert the roller guides into the rails in the  
pillars B.  
In the 5-seat configuration, it is installed behind  
the second row seats, with the third row seats  
stored folded away.  
In the 7-seat configuration, it is stored behind the  
third row seats.  
Load retaining partition  
In the event of sudden deceleration,  
objects placed on the load space cover  
can turn into projectiles.  
► Depending on version, you can access the  
boot by opening the rear screen in the tailgate  
and attaching the roller guides into the rails in  
the pillars C.  
66