Advertisement

Advertisement

Ease of use and comfort -> Manual air conditioning for Your Citroen Berlingo SUV Third Generation (2018-2025)

Ease of use and comfort  
Rapid heating of the passenger  
For more information on the Stop &  
Start system, refer to the corresponding  
section.  
The maximum level of ventilation is to be  
reserved for defrosting or to cool the  
temperature in the vehicle if it is too high.  
compartment  
If the air flow control knob is set to the  
minimum position (system deactivated),  
the temperature in the vehicle will no longer  
be controlled. A slight flow of air can still be  
felt, due to the forward movement of the  
vehicle.  
Heating  
► Press button 3c.  
► Set knob 1 to a high temperature  
(minimum 21).  
► Set knob 2 to at least position 3. In cold  
weather (around 0°C), the heating of the  
passenger compartment is optimal when  
ventilation is at level 5.  
► Press button 4 to produce quicker results  
(do not leave air recirculation active for too  
long: risk of misting the windows).  
► Do not press any of the other buttons.  
Temperature  
► Turn the thumbwheel 1 from "LO" (cold)  
to "HI" (hot) to adjust the temperature to your  
requirements.  
Manual air conditioning  
The air conditioning system only operates with  
the engine running.  
A setting of around 21 provides optimum  
comfort. Depending on your  
requirements, a setting between 18 and 24 is  
normal.  
In addition, we recommend avoiding left/right  
setting differences of more than 3.  
Contains R134A fluorinated  
greenhouse gases  
Depending on version and country of sale, the  
air conditioning system may contain R134A  
fluorinated greenhouse gases.  
1. Temperature.  
2. Air flow.  
3. Air distribution.  
4. Interior air recirculation.  
5. Air conditioning on/off.  
On entering the vehicle, if the interior  
temperature is significantly colder or  
warmer than the comfort value setting, there  
is no need to alter the value displayed in  
order to reach the required level of comfort.  
The system compensates automatically and  
corrects the temperature difference as quickly  
as possible.  
Stop & Start  
Air flow  
► Turn knob 2 to obtain sufficient air flow to  
ensure your comfort.  
The heating and air conditioning systems  
only operate when the engine is running.  
Temporarily deactivate the Stop & Start  
system to maintain a comfortable temperature  
in the passenger compartment.  
74  
Ease of use and comfort  
For maximum cooling or heating of the  
passenger compartment, it is possible to  
exceed the minimum value 14 or the  
maximum value 28.  
► Turn control 1 to the left until "LO"  
is displayed or to the right until "HI" is  
displayed.  
On/Off  
Automatic comfort mode  
3
► Press button 5 to activate/deactivate the air  
conditioning system.  
When the air conditioning is in operation, to  
cool the air more quickly, you can use interior  
air recirculation for a few moments by pressing  
button 4. Then restore the intake of exterior air.  
► Press the "AUTO" button 6 to toggle the  
mode.  
The active mode appears in the display screen,  
as described below:  
Ensures soft, quiet operation by limiting  
air flow.  
Offers the best compromise between a  
comfortable temperature and quiet  
operation.  
The air conditioning does not operate  
when the air flow adjustment is set to off.  
Air distribution  
Windscreen and side windows (3a).  
Provides dynamic, effective air flow.  
Switching the system off could result in  
Central and side air vents (3b).  
Footwells (3c).  
discomfort (humidity, misting).  
When the engine is cold, the air flow will  
only increase to its optimum level  
gradually, to avoid distributing too much cold  
air.  
In cold weather, it prioritises the distribution of  
warm air to the windscreen, the side windows  
and the footwells only.  
Dual-zone automatic air  
conditioning  
The air distribution can be adapted by combining  
the corresponding buttons.  
For optimum comfort, depending on  
the outside temperature  
<15°C: press buttons 3a and 3c.  
15°C- 25°C: press buttons 3b and 3c.  
>25°C: press button 3b.  
Manual mode  
If you wish, you can make a different choice from  
that suggested by the system, by changing a  
setting. The other functions will still be controlled  
automatically.  
The "AUTO" symbol disappears if you change  
a setting.  
1. Temperature.  
2. Air flow.  
3. Air distribution.  
4. Recirculation of interior air.  
5. Air conditioning on/off.  
6. Automatic comfort mode.  
7. Visibility programme.  
8. "Mono" function.  
Air conditioning  
With the engine running, the air conditioning is  
designed to operate effectively in all seasons,  
with the windows closed.  
It enables you to:  
Deactivating the system  
► Press button 2 "-" until the fan symbol  
disappears.  
– lower the temperature in summer,  
– enhance the effectiveness of the demisting  
function in winter, above 3°C.  
75