Get Ease of use and comfort -> Rear seats (row 3) Guide for Citroen Berlingo SUV Third Generation (2018-2025)

Ease of use and comfort

► Guide the backrest down to the horizontal

position.

The folding of the backrest is

accompanied by a slight lowering of the

corresponding seat cushion.

When the backrest is released, the red

indicator is visible in the release grips on the

outer seats.

► Guide the backrest down to the horizontal

position.

3

With the central seat, only the strap must

be used.

Repositioning the backrests

First check that the outer seat belts are

lying vertically ﬂat alongside the backrest

latching rings.

Repositioning the backrests

Outer seat (left-hand or right-hand)

► Put the backrest in the upright position and

push it ﬁrmly to latch it home.

► Check that the red indicator in the release

grip 1 is no longer visible.

First check that the outer seat belts are

lying vertically ﬂat alongside the backrest

latching rings.

► Ensure that the outer seat belts are not

trapped during the manoeuvre.

► Put the backrest in the upright position and

push it ﬁrmly to latch it home.

► Check that the red indicator on the release

grips 1 of the outer seats is no longer visible.

► Ensure that the outer seat belts are not

trapped during the manoeuvre.

Rear seats (row 2)

► Turn the backrest release handle 1.

► Guide the backrest down to the horizontal

position.

Check that the backrest of the upright

central seat is correctly aligned with the

backrests of the outer seats.

Central seat

Folding the backrests

First steps:

Central seat

► lower the head restraints,

► Put the backrest in the upright position and

push it ﬁrmly to latch it home.

► Check that the central seat belt is not trapped

during the manoeuvre.

► if necessary, move the front seats forward,

► check that nothing or no person might

interfere with the folding of the backrests

(clothing, luggage, etc.),

► check that the outer seat belts are lying ﬂat

on the backrests.

Rear seats (row 3)

► Pull the backrest release tab 1.

57

Ease of use and comfort

► Lower the head restraint as far as it will go.

Access to row 3

If you want to load luggage onto the row 3

backrests while in the table position, the row 2

seats must also be folded down.

► Operate control 1 to fold the backrest onto

the seat cushion.

► Using the row 2 seat grip, fold the backrest.

► To reposition it, tilt the backrest backwards

until it locks into place.

Repositioning the backrest

► Unlock it by pulling control 1.

► Return it to its initial position

► Check that the assembly is anchored

properly.

Longitudinal adjustment

XL

Labels in row 3

Fully folded position

XL

Placing the seat in the fully folded position

► Place the backrest in the table position.

While driving, it is prohibited to have a

passenger seated next to a seat in the fully

folded position.

► Raise the control and slide the seat forwards

or backwards.

Table position

Placing the backrest in the table position

58

Ease of use and comfort

► Lower the head restraint as far as it will go.

► Place the seat in the fully folded position.

Head restraint height

adjustment

3

► Pull on the strap 3 to open the seat

anchorages.

► While still holding the strap 3, lift the seat.

Reﬁtting the seat

► To raise it, pull it upwards as far as possible

(notch).

► Pull on the strap 3 to open the seat

anchorages.

► To remove it, press the lug A and pull it

upwards.

► While still holding the strap 3, place them in

the anchorage points on the ﬂoor.

► Release the strap 3.

► Ensure that no object or feet are obstructing

the rear anchorage points 4 and that the seat

belt is correctly positioned and available.

► Fold the seat backwards to ﬁx its rear

anchorage feet.

► To put it back in place, engage the head

restraint rods in the openings keeping them in

line with the seat backrest.

► To lower it, press the lug A and push down on

the head restraint at the same time.

► Lift the bar 2, located behind the seat, to

release the feet of the seat from their anchorage

in the ﬂoor.

► Tilt the entire seat forwards.

► Hook the strap 3 on the row 2 head restraint

rod.

Returning the seat to the sitting position

► Fold the entire seat backwards.

► Check that the seat belt is not trapped during

the manoeuvre.

The head restraint has a frame with

notches which prevents it from lowering;

this is a safety device in case of impact.

The adjustment is correct when the upper

edge of the head restraint is level with the

top of the head.

► Use the control 1 to lift the backrest to its

original position.

► Raise the head restraint.

Never drive with the head restraints removed;

they must be ﬁtted and correctly adjusted.

Removing the seat

59

Ease of use and comfort

Never drive with passengers seated at

Removing/reﬁtting

the rear when the head restraints are

removed or not in the high position; the head

restraints must be in place and in the high

position.

► To remove it on the driver's side, move

the seat as far back as possible and give the

fasteners a quarter turn.

For more information on the Seat belts,

refer to the corresponding section.

This compartment, located above the sun visors,

can be used to store various objects.

► To reﬁt it, position the mat and replace the

fasteners, giving them a quarter turn.

► Check that the mat is secured correctly.

Roof and roof storage

Interior ﬁttings

Mats

To avoid any risk of jamming the pedals:

– Only use mats which are suited to the

ﬁxings already present in the vehicle; these

ﬁxings must be used.

Overhead storage compartment and

central storage compartment

Fitting

– Never ﬁt one mat on top of another.

The use of mats not approved by CITROËN

may interfere with access to the pedals and

hinder the operation of the cruise control/

speed limiter.

The approved mats have two fasteners

located underneath the seat.

The overhead storage compartment (1) is

located above the sun visors and can be used to

store miscellaneous objects.

There is a storage space (2) located in the roof

lining.

Overhead storage unit

When ﬁtting it on the driver's side, only use the

mountings present on the carpet.

The other mats are simply laid over the carpet.

The maximum permitted load is 6 kg.

60

Ease of use and comfort -> Rear seats (row 3) for Your Citroen Berlingo SUV Third Generation (2018-2025)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals