Advertisement

Advertisement

Ease of use and comfort -> Cabin fittings for Your Citroen Relay Van 2014-2024

Seats  
Access to the rear seats  
Seat backrest folded position of the  
central seat (rows 2 and 3)  
rEAr SEAtS  
To gain access to row 3, manoeuvre the  
control on the outer seat of row 2 and tilt the  
seat back forwards.  
The backrest of the central seat can be  
folded fully onto the cushion and used as a  
cup holder table.  
Seat backrest angle  
To return the seat backrest to its initial  
position, bring it to the vertical position  
without touching the control.  
Lower the head restraint then raise the  
control and fold the seat backrest forwards.  
Turn the control to adjust the angle of the  
seat backrest.  
To return the seat backrest to its initial  
position, raise the control again.  
To understand the significance of the  
precautions mentioned on the labels,  
refer to the "Quick help - Glossary of labels"  
section.  
3
Seats  
Turn the two levers upwards to release the  
front anchorages  
Raise the bench seat and remove it.  
rEAr BEncH SEAtS  
removing the bench seat  
At least two people are required to  
remove the bench seat.  
Good practice  
Ensure that the seat belts are always  
accessible and easy for the passenger to  
fasten.  
Access to the rear seats  
Lower the head restraints then raise the first  
lever and tilt the seat back forwards.  
Fold the seat backrest onto the cushion as  
described above.  
Passengers must correctly adjust the head  
restraint of their seat, before adjusting and  
fastening their seat belt.  
Turn the two grips forward to release the  
rear anchorages.  
Seat backrest folded position  
Tilt the base of the bench seat forwards to  
place the assembly in the vertical position.  
Remove the head restraints then tilt the seat  
backrest as described above.  
Removed head restraints must be stowed  
securely.  
With your right hand, raise the second lever  
then tilt the seat backrest 5° towards the  
rear.  
Do not travel in row 3 with the row 2 bench  
in the vertical position.  
Do not leave objects on the folded  
row 2 backrest.  
With your left hand, tilt the seat backrest  
fully forwards onto the cushion.  
Practical information  
cABIn FIttInGS  
central storage  
Front seat storage  
An open storage space is provided, located  
under the centre console panel.  
There is a fixed storage tray under the  
driver's seat.  
The space under the passenger's seat is  
used to store the tool box containing the  
tools required to change a wheel or bulb or  
to tow the vehicle.  
It gives access to the auxiliary Jack socket  
and USB port intended for the transfer of  
data to the audio system.  
If your vehicle is fitted with a seat with  
variable damping, it does not have any  
storage compartments.  
To take out the box, turn the control a  
quarter turn to unlock it, then pull the box  
forward.  
Depending on equipment, it is also fitted  
with double cup holder and/or a smartphone  
holder.  
When putting it back, don't forget to turn the  
control a quarter turn in the other direction to  
lock the box in its housing.  
3
Practical information  
Folding writing table  
Multifunction carrier  
Pull the top of the carrier to unfold it.  
This is located in the centre of the  
dashboard.  
This can be used to support a portable  
device, such as a smartphone in a vertical  
position or a touch screen tablet in a  
horizontal position.  
Turn the side lever to release the upper and  
lower clamps.  
The clip can be used to secure documents,  
slips, ...  
Spread the clamps to fit the portable device.  
Raise the side lever to lock the clamps.  
Pull or push the top of the table to unfold or  
fold it.  
To insert or extract a CD, you must first  
fold the table.  
Before folding the carrier, remove the  
portable device by repeating the same  
operations.  
If your vehicle is fitted with a two-seat front  
bench and a passenger front airbag, the  
table cannot be raised.  
Push the top of the carrier to fold it.  
Practical information  
cooled glove box  
Front door pockets  
Passenger glove box  
This is located in the top of the dashboard,  
passenger side.  
Depending on the country of sale, one of  
the door pockets may house the temporary  
puncture repair kit.  
The air delivered to the glove box is the  
same as that from the vents.  
3