Advertisement

Advertisement

Ease of use and comfort -> Rear heating and / or air conditioning for Your Citroen Relay Van 2014-2024

Ventilation  
AutO mode with personalisation  
Switch on in AutO mode, certain  
settings can be modified: the  
distribution, the air flow, the air  
conditioning and the air intake/  
recirculation.  
The display changes from FuLL AutO to  
AutO.  
To return to fully automatic operation, press  
this button again. The display on the control  
panel changes from AutO to FuLL AutO.  
If the system is not able to maintain  
the setting selected following manual  
adjustments, the setting flashes then AutO  
is cleared. Press the AutO control to return  
to the automatic settings.  
dIGItAL AIr cOndItIOnInG -  
MOnO-zOnE  
AutO mode  
Switching on FuLL AutO mode:  
If your vehicle is fitted with this system, the  
controls are located in the middle of the  
dashboard.  
pressing the AutO control  
switches on the system's functions,  
confirmed by the display of FuLL  
Switching off the air conditioning  
Pressing this control switches  
off the air conditioning functions.  
The snowflake is cleared from the  
screen.  
AutO. This is the normal operating mode for  
the digital air conditioning system.  
Using the moving ring surrounding the AUTO  
control, set the comfort temperature to be  
reached according to a setting between:  
Control screen for your digital air  
conditioning system.  
When the engine is running and the air  
conditioning is on, this symbol and the  
message FuLL AutO are displayed.  
complete switch-off  
-
-
HI (High to ≈ 32) and,  
LO (Low to ≈ 16).  
Pressing this control switches  
the system off. The LED and the  
screen switch off.  
The system controls the distribution, flow and  
intake of air to ensure comfort equivalent to the  
setting displayed and sufficient recirculation of  
air in the passenger compartment.  
The other components are displayed  
according to the settings selected by the user.  
No further adjustments are required.  
Ventilation  
comfort value adjustment ring  
Intake of exterior air /  
recirculation of interior air  
The settings range between:  
When the LED is on, the air  
recirculates inside the passenger  
compartment to prevent the entry of exterior  
odours and smoke. This position should be  
temporary.  
-
increasing the interior ambient air  
temperature HI (High) which goes up to  
to a maximum setting of 32,  
-
cooling the interior ambient air  
temperature LO (Low) which goes down  
to a setting of 16.  
When the ambient air comfort level has been  
reached, pressing the button switches the  
LED off and reopens the exterior air intake.  
Air distribution  
Pressing the AutO button also restores  
the intake of exterior air. Returning to this  
position permits renewal of the air in the  
passenger compartment and demisting.  
Pressing the AutO button again restores  
the FuLL AutO function.  
A press illuminates the LED on the buttons  
which distribute the air flow towards:  
AddItIOnAL rEAr VEntILAtIOn  
the windscreen and front side  
window vents (demisting/  
defrosting the windows),  
The controls for this system, additional to  
the standard cabin ventilation system, are  
on the lower dashboard, to the left of the  
steering wheel.  
the central and side vents (chest  
and face),  
rapid demisting /  
defrosting  
Pressing this control permits  
rapid clearing of the windows.  
The LED is on.  
Air outlet  
the vents in the front and rear  
areas (feet).  
A press on this control activates  
the extraction of air to the  
outside; the LED comes on.  
Press again to switch off.  
The system manages the air conditioning,  
the flow and intake of air, the defrosting  
of the rear screen and provides optimum  
distribution of the air to the windscreen and  
front side windows.  
The combination of buttons permits  
improvement of air distribution.  
Air inlet  
Air flow  
A press on this control activates  
the entry of air into the cabin; the  
LED comes on. Press again to  
switch off.  
If your vehicle is fitted with additional  
heating, switch it off to ensure rapid and  
effective demisting/defrosting.  
Successive presses of this button  
increase (+) or reduce (-) the  
force of the air flow to the interior.  
3