2020-2026 Cupra Leon 4 Door Driving -> Electrically unlocking trailer hook User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Electrically unlocking trailer hook for Your Cupra Leon 4 Door First Generation (2020-2026)

Driving  
The maximum vertical load technically  
Never attempt to “straighten” the towing  
When driving on surfaces with poor grip,  
permissible is not being exceeded on the  
coupling device.  
vehicle and trailer while accelerating.  
the trailer can even interfere with the sta-  
bility system.  
Take into account the speed limit for ve-  
The trailer has a rigid draw bar.  
hicles with a trailer, as it could be lower  
than for vehicles without a trailer.  
Trailers with a high centre of gravity can  
tip over without having previously weaved.  
If the trailer has brakes, it must be equip-  
ped with a mechanical overrun brake.  
If a trailer is not attached, but a connec-  
tor is plugged into the power socket (e.g.  
installation of a bicycle rack with lights), re-  
peated automatic braking may occur in ex-  
treme driving conditions.  
WARNING  
Stabilisation of the towing vehicle  
and trailer combination  
The enhanced safety provided by the elec-  
tric stability control of the vehicle and trail-  
er should not lead you to take any risks that  
could compromise your safety.  
The stabilisation of the vehicle and trailer  
combination is an additional function of the  
electronic stability control (ESC).  
Adapt your speed and driving style at all  
Electrically unlocking trail-  
er hook  
times to suit visibility, weather, road and  
traffic conditions.  
If the system detects that the trailer is weav-  
ing, it intervenes to reduce the swaying of  
the trailer.  
Accelerate with caution when the road is  
slippery.  
Description  
When adjusting any settings, stop accel-  
Vehicle and trailer combination stabilisa-  
tion requirements  
erating.  
The vehicle is factory-equipped with a  
WARNING  
towing bracket or has been retro-fitted with  
a compatible towing bracket.  
The electric stability control for the vehicle  
and trailer may not correctly detect all driv-  
ing conditions.  
The ESC and the TCS are switched on. The  
control lamp or is not lit up on the in-  
strument cluster.  
When the ESC is switched off, the stabili-  
sation of the towing vehicle and trailer is al-  
so switched off.  
The trailer is connected to the towing vehi-  
cle through the trailer power socket.  
The stability system does not always de-  
Fig. 199 On the left side of the luggage  
compartment: button for unlocking the  
tow hook.  
The vehicle is travelling at over 60 km/h  
(approx. 37 mph).  
tect light trailers, so it may not stabilise  
these correctly.  
294  
Towing bracket device  
The towing bracket’s hook is located in the  
bumper. Tow hooks for electrical unlocking  
cannot be removed.  
Open the rear lid.  
Pull the Fig. 199 button briefly. The tow  
Never use a tool or instrument while the  
tow hook is moving.  
›››  
hook unlocks electrically.  
Never press the Fig. 199 button when  
›››  
there is a trailer hooked to the vehicle or  
when a carrier system or other accessories  
are mounted on the tow hook.  
There should be no person, animal or object  
Turn the tow hook under the bumper with  
in the path of the tow hook  
.
›››  
your hand until you feel and hear that it en-  
gages and the control lamp on the button re-  
mains on continuously.  
Unlocking the tow hook and removing it  
If the tow hook is not attached properly,  
do not use it. Instead, go to a specialised  
workshop and have the towing bracket  
checked.  
Stop the vehicle and connect the electron-  
ic parking brake page 265 .  
Close the rear lid.  
›››  
The control lamp  
Switch off the engine.  
Open the rear lid.  
If you detect any fault in the electrical  
If the warning light on the button  
Fig. 199 flashes, this means that the  
system or in the towing bracket, contact a  
specialised workshop and ask them to  
check it.  
›››  
Pull the Fig. 199 button briefly. The tow  
›››  
tow hook has not been attached properly or  
is damaged  
hook unlocks electrically and automatically  
turns outwards. The button's control lamp  
flashes.  
.
›››  
If the ball has a diameter of less than 49  
If the warning lamp Fig. 199 remains  
mm at any one point, do not use the towing  
bracket under any circumstances.  
›››  
on with the rear lid open, the tow hook is  
correctly in place both when extracted and  
when covered.  
Finish remove the tow hook by hand until  
you feel and hear that it has engaged and the  
control lamp on the button stays on.  
CAUTION  
The control light of the lamp switches off ap-  
proximately 1 minute after closing the read  
lid.  
If you clean the vehicle with high-pressure  
or steam devices, do not point the jet di-  
rectly towards the retractable tow hook or  
the trailer power socket, as this may dam-  
age the joints or remove the grease neces-  
sary for lubrication.  
Close the rear lid.  
Hitching and connecting a trailer  
page 290.  
›››  
WARNING  
Retracting the tow hook  
Undue use of the towing bracket may cause  
injury and accidents.  
Stop the vehicle and apply the electronic  
parking brake.  
Note  
Only use the tow hook if it is properly en-  
Switch off the engine.  
At extremely low temperatures, the tow  
hook may be impossible to operate. In this  
case, place the vehicle in a warmer location  
(for example, a garage).  
gaged.  
Unhook the trailer and interrupt the elec-  
Always ensure that no person, animal or  
trical connection between it and the vehicle.  
If you are using an adapter, remove it from  
the trailer's power socket.  
object is to be found in the path of the tow  
hook.  
295  

Related Topics

Popular Owner Manuals