2024-2026 Cupra Terramar SUV Assistant systems -> ACC - Adaptive Cruise Control User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Assistant systems -> ACC - Adaptive Cruise Control for Your Cupra Terramar SUV First Generation (2024-2026)

204
Assistant systems
Eco Assist uses the trip data from the infotain-
ment system and the sensors of certain driver
assistance systems. If no destination guidance
is active, the most likely route is used.
Pressing the accelerator can cancel the inter-
vention of the assistance at any time.
Eco Assist can be activated and deactivated in
the infotainment system, in the assistance sys-
tem settings ›››page39.
Eco Assist is temporarily deactivated if:
●
The gear selector is in the S position.
●
The Performance or CUPRA drive prole is
used.
●
Driving with adaptive cruise control (ACC) or
cruise control (GRA).
When these conditions no longer exist, the as-
sistance is reactivated if it is switched on in the
assistance system settings.
Eco Assist is available depending on equip-
ment and not in all countries.
WARNING
The system is not a replacement for driver
awareness.
●
Adapt your speed and driving style at all
times to suit visibility, weather, road and traf-
c conditions.
●
Road signs on the road and traic regula-
tions have priority over eco-driving notes.
Note
●
The appearance of the symbols may vary
slightly depending on the equipment and
model. System updates may modify or ex-
pand the symbols.
●
When the system is active, Eco Assist may
also increase recuperation without display-
ing any indication. This can occur in situa-
tions such as when the accelerator pedal is
released when a vehicle is driving in front. In
this case, energy recuperation is adapted to
match the speed of the vehicle in front with-
out any indication being displayed.
ACC - Adaptive Cruise
Control
Introduction
Adaptive Cruise Control (ACC) maintains a
constant speed set by the driver. When ap-
proaching another vehicle in front, the ACC
detects it and adapts the speed automatically,
maintaining a distance set by the driver.
Does my vehicle have ACC?
Your vehicle has ACC if it has the ACC function
buttons on the multifunction steering wheel
›››
page123, or if it has the conguration
menu in the infotainment system.
Speed range
ACC regulates at speeds between 20 and
210km/h (15 and 130mph).
When Electric mode is activated in hybrid ve-
hicles, the ACC speed range may vary.
The ACC can bring the vehicle to a standstill if
a vehicle in front stops.
Driving with ACC
You can override the ACC at any time. Brak-
ing interrupts the ACC. If you accelerate, reg-
ulation is interrupted during acceleration and
then resumed.
Driver intervention prompt
ACC is subject to certain limitations in-
herent to the system. This means that the
driver will have to control the speed and
distance from other vehicles in certain sit-
uations. In this case, the instrument clus-
ter display will tell you to intervene by
applying the brake, and an audio warning
will be played.
Radar sensors
The ACC uses the front radar technology. Read
its maintenance instructions and information
about its limitations ›››
page194.
Assistant systems
205
ACC - Adaptive Cruise Control
1
2
WARNING
The ACC’s technology cannot overcome the
system's inherent limitations or change the
laws of physics. If used negligently or invol-
untarily, it may cause serious accidents and
injuries. The system is not a replacement for
driver awareness.
●
Always be prepared to brake or accelerate.
●
If you press the accelerator pedal the ACC
will stop working. Therefore, it will not brake
or request any braking intervention.
●
Adapt your speed and safe distance to the
vehicle in front of you at all times to suit visi-
bility, weather, road and traic conditions.
●
Do not use the ACC in poor visibility, or on
roads that are steep, with lots of curves or
slippery.
●
Never use ACC when driving o-road or on
unpaved roads.
●
The system may not react in time to
stationary obstacles (such as a traic jam
queue), particularly at high speeds. React
soon enough to avoid a hazardous situation.
●
The system may not react to stopped vehi-
cles in the same lane. You must react early
enough yourself in this case.
●
The system does not react to people, an-
imals or vehicles that are crossing or ap-
proaching in the opposite direction.
●
If you are driving with a spare wheel tted,
the ACC system could automatically switch
o. Switch o the system when starting o.
●
Brake immediately if the ACC does not slow
down enough.
●
Brake immediately when a driver interven-
tion instruction is displayed on the instru-
ment cluster screen.
●
If the vehicle continues to move involun-
tarily after a driver intervention prompt,
brake the vehicle.
●
The brake pedal may move downwards dur-
ing braking. Be careful not to position your
foot under the pedal.
Note
If the ACC does not work as described in
this chapter, do not use it until it has been
checked by a specialised workshop. CUPRA
recommends visiting a specialised CUPRA
dealer or any SEAT dealership.
ACC operation
Fig.133 On the instrument cluster display:
ACC active.
Fig.134 On the multifunction steering
wheel: buttons for operating the ACC.
›››
Fig.133
Vehicle detected in front. It will light up if
the distance to the vehicle is set.
Distance selected.
206
Assistant systems
Connecting
●
Press the button on the multifunction
steering wheel ›››Fig.134.
●
Then select the “ACC (Adaptive Cruise
Control)” checkbox in the driving assistants
menu.
The ACC does not regulate anything yet
(standby).
Start regulation
Activating the ACC system also automatically
activates the ESC and traction control (TCS).
●
To start regulation, press the button
›››Fig.134.
The ACC saves the current speed and main-
tains the set distance. If the current speed
is outside the predened speed range, ACC
adjusts the speed to the nearest limit of the
range.
Depending on the driving situation, the follow-
ing control lamps come on:
Lights up green
ACC connected, no vehicle detected in
front.
Lights up green
ACC connected, vehicle detected in
front.
When the ACC is in standby, the control lamps
light up grey.
Program the speed
+ 1 km/h (1mph)
- 1 km/h (1mph)
+ 10 km/h (5mph)
- 10 km/h (5mph)
Program the distance setting
The distance can be set to one of ve levels,
from very short to very long:
●
Press the button and then or button
›››Fig.134.
●
Alternatively, press button as many times
as necessary to set the desired distance.
Keep in mind each country’s regulations on
minimum braking distances.
Suspend regulation (standby)
●
Briey press button ›››Fig.134 or press
the brake pedal.
The ACC indicator lamp is grey; the speed and
distance are saved.
If the ESC or TCS is switched o, the ACC is
automatically interrupted.
Reinstating the cruise control
●
Press the button. The ACC regulates to
the last speed and distance setting.
●
OR: Press button to regulate to the cur-
rent speed.
Exceeding the speed regulated by the ACC
While driving with the ACC switched on, the
driver can increase speed by pressing the ac-
celerator pedal. ACC regulation is suspended
until you release the accelerator pedal ›››
.
Changing the drive prole
The drive prole selected can aect
ACC acceleration and braking behaviour
›››page185.
WARNING
Before driving o, check that the road is
clear. The radar sensor may not detect ob-
stacles that could be on the road. This can
lead to an accident and serious injury. Press
the brake if necessary.
NOTICE
If you increase speed using the accelerator
pedal, the ACC may not be able to safely
adjust the speed or the distance due to the
limitations of the system.
●
Be prepared to react if required by the sit-
uation.
Assistant systems
207
ACC - Adaptive Cruise Control
1)
Or on the left, in countries that drive on the left hand side of the road.
Special driving situations
Fig.135 On the instrument cluster screen:
ACC active, vehicle detected on the left.
Be aware of the limitations and warnings
described at the beginning of this chapter
›››
page204, Introduction.
Avoid undertaking on the right
1)
If a vehicle is detected in the left lane that is
travelling at a speed slower than that set by
the driver, it will brake the vehicle within the
comfort limits of the system to avoid passing it
on the right ›››
Fig.135.
You can cancel this regulation by changing the
set speed or by pressing the accelerator pedal.
The function works at speeds over 80km/h
(50mph). It may not be available in certain
countries.
Overtaking
When the turn signal is switched on for over-
taking, the ACC reduces the distance from the
vehicle in front to help with the overtaking ma-
noeuvre. The set cruising speed will not be ex-
ceeded.
The function works at speeds over 80km/h
(50mph). It may not be available in certain
countries.
Stop&Go function
The ACC can bring the vehicle to a standstill if
the vehicle in front stops.
The ACC remains active and the message ACC
ready to start is displayed on the instrument
cluster for a few seconds. You can extend or
reactivate this warning by pressing the
but-
ton or by grabbing the wheel if your vehicle is
tted with Travel Assist. During this time, the
vehicle will move o again if the vehicle in front
moves forwards.
To move o when the message ACC ready to
start is not longer displayed, once the vehicle
in front has moved o:
●
Vehicles with automatic transmission:Briey
depress the accelerator pedal.
●
OR: press the button on the multifunc-
tion steering wheel.
●
OR: grab the steering wheel again if your ve-
hicle has Travel Assist.
The ACC does not remain active in the follow-
ing cases:
●
The stopping phase lasts for several minutes.
●
When a vehicle door is opened.
●
If the ignition is switched o.
WARNING
If the message ACC ready to start is displayed
on the instrument cluster display and the
vehicle in front moves o, your vehicle will
move o automatically. In this case, any ob-
stacles in the road may not be detected. This
may cause serious accidents and injuries.
●
Always check the road before moving o,
and apply the vehicle brakes yourself if nec-
essary.
ACC system limitations
The limits of the ACC system mean that it is not
appropriate in all situations ›››
in Introduc-
tion on page205.
CUPRA does not recommend using the func-
tion in the following cases ››› :
●
Heavy rain, snow or fog.
●
When going through tunnels.
●
On stretches of road with roadworks.
●
On routes with curves, e.g. on mountain
roads.
208
Assistant systems
●
On o-road routes.
●
In covered car parks.
●
On roads with embedded metal objects such
as train or tram tracks.
●
On roads with loose gravel.
Pay special attention when using ACC in the
following situations:
On curves
Fig.136 Vehicle on a bend.
The ACC may not detect the vehicle in front
on a curve, or may regulate the distance from
vehicles in other lanes ›››
Fig.136.
Vehicles outside the sensor zone
Fig.137 Motorcyclist ahead out of range of
the radar sensor.
Fig.138 Vehicle changing lanes.
In the following situations the ACC may not
react, or may react slowly or inappropriately:
●
Vehicles that are not aligned while driving or
that are outside the sensor's detection area,
such as motorcycles ›››
Fig.137.
●
Vehicles that move into your lane, a short
distance from your vehicle ›››Fig.138.
●
Vehicles with loads or accessories that pro-
trude from the sides, rear or roof.
Objects that are not detected
Fig.139 A vehicle turning and another
stationary.
The ACC function only detects and reacts to
vehicles moving in the same direction. There-
fore it does not detect:
●
People
●
Animals
●
Vehicles travelling in the opposite direction
or crossing the road.
●
Other stationary obstacles
The ACC may not react to stationary vehicles.
If, for example, a vehicle detected by the ACC
turns or moves over and there is a stationary
vehicle in front of it, the ACC will not react to
the second vehicle ›››Fig.139.
WARNING
Using the ACC in the above situations can
cause serious accidents and injuries, and you
could break the law.

Related Topics

Popular Owner Manuals