WARNING
●
The visibility of the radar sensors can be
impaired by dirt or environmental inuences,
such as rain, fog, snow, mud, dust, insects,
etc.
●
Clean the sensor area on the bumper as
indicated in ›››page395, Cleaning the
exterior. When the radar sensor starts cor-
rectly detecting again, the message disap-
pears from the screen and the functions be-
come available again.
NOTICE
●
If the radar sensors are dirty or poorly ad-
justed, the Front Assist or Junction assist sys-
tem may give unnecessary warnings and ap-
ply the brakes inappropriately.
●
The operation of the radar sensors can be
aected by strong reections of the emitted
signal. This may occur, for example, in an
enclosed car park or due to the presence
of metallic objects (e.g. guard rails or sheets
used in road works).
●
The sensor may not be adjusted correctly if
it receives an impact. This may compromise
the system's eicacy or disconnect it. If you
have the feeling that the radar sensor is dam-
aged or adjusted incorrectly, switch o the
Front Assist, ACC and Junction assist func-
tions to avoid any damage. If this occurs have
it adjusted.
●
The rear bumper should only be painted
with paint authorised by CUPRA. Junction as-
sist functions may be limited or work incor-
rectly if other paints are used.
Interior camera
Depending on the equipment, the vehicle may
be tted with a camera on the interior rear
view mirror. This camera detects the driver and
his/her driving behaviour to provide support to
the:
●
driver attention monitoring function
›››page29.
NOTICE
Take the following points into consideration
to ensure the camera’s functionality is not
aected:
●
Do not cover the eld of vision of the cam-
era.
●
Adjust the mirror correctly.
Front camera
Fig.126 On the windscreen: eld of vision
of the Lane Assist system camera.
Depending on the equipment, the vehicle may
be tted with a front camera on the front
windscreen. This camera detects lane bounda-
ries (lines) to provide support for the following
functions:
●
Lane Assist ›››page215.
●
Travel Assist ›››page218.
●
Emergency assist ›››page221.
Automatic deactivation of supported func-
tions
The front camera automatically switches o
when, among other things, it detects that it is
permanently covered. This may be the case if,
for example, there is a layer of snow or ice.