2024-2026 Cupra Terramar SUV Assistant systems -> Travel Assist User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Assistant systems -> Travel Assist for Your Cupra Terramar SUV First Generation (2024-2026)

218
Assistant systems
The system behaves dierently than expec-
ted
●
The camera has been altered or damaged,
e.g. because of damage caused to the wind-
screen. Check for visible damage.
●
Do not mount objects on the steering wheel.
If the problem persists, consult a specialised
workshop.
Note
After switching on the ignition, it may take a
few seconds before a fault is detected in the
system.
Note
If lane assist is not available, Emergency As-
sist and Travel Assist are not available either.
Travel Assist
Introduction
Travel Assist combines adaptive cruise control
(ACC) and the adaptive lane guidance func-
tion. Within the limitations of the system, the
vehicle can maintain a distance from the vehi-
cle in front that is preselected by the driver
and remain in the preferred position within the
lane.
Travel Assist uses the same sensors as Adaptive
Cruise Control (ACC) and Lane Assist. There-
fore, carefully read the information about
the ACC ›››
page204 and the Lane Assist
›››page215 and take into account the limita-
tions of the systems and the indications given
in the information.
How to know if the vehicle is tted with
Travel Assist
The vehicle is tted with Travel Assist if the
Travel Assist option appears in the instrument
cluster menu when the button on the multi-
function steering wheel is pressed.
Speed range
Travel Assist regulates at speeds between 20
and 210km/h (15 and 130mph).
Driving with Travel Assist
Travel Assist automatically controls the accel-
erator pedal, the brakes and the steering. In
addition, Travel Assist may, within its limita-
tions, decelerate the vehicle until it stops be-
hind another that stops, and automatically
start again.
You can override assisted adjustment at all
times.
Status display
Fig.142 On the instrument cluster display:
display of active regulation (schematic
representation).
1
The colour of the lane markings indicates
the status of the adaptive lane guidance
function.
●
Green: adaptive lane guidance function
active.
●
Grey: passive adaptive lane guidance
function.
2
Distance set.
Depending on the equipment, there is
also an indication on the Head-up-Display
›››
page22.
Depending on the equipment, additional de-
tails, e.g. dashed road markings and vehicles
in front, can also be shown on the instrument
cluster display.
Assistant systems
219
Travel Assist
Control lamps indicate the status of the system
on the instrument cluster display:
Indicator lamp green: Travel Assist ac-
tive, adaptive cruise control and adap-
tive lane guidance function are active.
Partially green lamp: Travel Assist ac-
tive, adaptive cruise control active and
adaptive lane guidance function pas-
sive.
Grey lamp: Travel Assist deactivated,
not regulating.
Driver intervention prompt
If you remove your hands from the steering
wheel, after a few seconds the system asks
you to take over the steering with an indication
on the instrument cluster display and audible
warnings.
If you do not react, Travel Assist is deactivated.
Depending on the equipment, Emergency As-
sist activates in its place.
WARNING
The Travel Assist smart technology cannot
overcome the limits imposed by the laws of
physics and it only works within the limits
of the system. If Travel assist is used negli-
gently or involuntarily, it may cause serious
accidents and injuries. The system is not a
replacement for driver awareness.
●
Bear in mind the system limitations and
the indications regarding the control of the
Adaptive Cruise Control (ACC) and Lane As-
sist.
●
Adapt your speed and safety distance to
the vehicle in front of you at all times to
suit visibility, weather, road and traic condi-
tions.
●
Do not use Travel Assist when visibility is
bad, on steep roads, on windy roads or in slip-
pery conditions (e.g., snow, ice, rain or loose
gravel), or on ooded roads.
●
Do not use Travel Assist oroad or on roads
where the surface is not rm. Travel Assist
has been designed for use on paved roads
only.
●
Travel Assist does not react to people or
animal or vehicles crossing your path or
which approach you head-on in the same
lane.
●
Brake immediately if Travel Assist does not
slow down enough.
●
Brake immediately when instructed to do
so on the instrument cluster display, or if
Travel Assist does not reduce speed sui-
ciently.
●
Brake when the vehicle continues to move
forward without it being desired after an indi-
cation to brake.
●
If possible, do not wear gloves while driv-
ing. The system could interpret this as no
driving activity.
●
If driver intervention is requested on the
instrument cluster display, immediately re-
sume control of the vehicle.
●
Keep your hands on the steering wheel
at all times, to ensure you always have con-
trol over the steering. The driver is always re-
sponsible for keeping the vehicle in its own
lane.
●
Always be prepared to adjust the speed
yourself.
Note
Online services provided and activated
through CUPRA CONNECT (depending on
device and country) may enhance the opera-
tion of Travel Assist when connected to the
Internet.
220
Assistant systems
Operating Travel Assist
Fig.143 Left side of the multifunction
steering wheel
Switch on and start regulation
The Travel Assist function is activated via the
driving assistance menu displayed on the in-
strument cluster.
1. Press the
button on the multifunction
steering wheel.
2. Then select the Travel Assist option from
the menu.
Depending on the driving situation, the vehi-
cle switches to the following system statuses in
Travel Assist:
●
If the ACC was already regulating, Travel As-
sist maintains the current speed and the preset
distance to the vehicle in front.
When lane markings are detected, the vehicle
is also kept in the lane by steering movements.
●
If ACC was not already regulating, Travel As-
sist remains selected but in a passive status
(not regulating).
Press the button.
Travel Assist switches to the active system sta-
tus, depending on the driving situation.
The indicator lamp for the driving situation
lights up on the instrument cluster display. A
message is also displayed.
Interrupting regulation
1. Briey press the button .
OR: press the brake pedal.
The set distance remains saved.
Making other adjustments
All other aspects of Travel Assist are controlled
like the ACC.
Troubleshooting
Travel Assist is not available or does
not work as expected
The control lamp lights up in yellow. A relevant
warning is also displayed on the instrument
cluster display.
●
There is a fault in the sensors. Check the
causes and solutions described in the informa-
tion about the ACC ›››page209 or the Lane
Assist ›››page217.
●
There is a fault or a defect. Switch the engine
o and on again.
●
The system limits are exceeded.
●
If the problem persists, consult a specialised
workshop. CUPRA recommends visiting a spe-
cialised CUPRA dealer or any SEAT dealership.
Grip the steering wheel
The warning lamp lights up white and a mes-
sage is then shown on the instrument cluster
display.
●
You released the steering wheel for a few
seconds. Take hold of the steering wheel and
take control of the vehicle.
Grip the steering wheel
The warning lamp lights up red and a message
is shown on the instrument cluster display. De-
pending on the situation, an audio warning
sounds or the steering wheel vibrates.
●
You have let go of the steering wheel for
a long time, or the system limits have been
reached. Immediately take hold of the steering
wheel and take control of the vehicle.
Travel Assist disconnects automatically
●
There is a fault or a defect. Switch the engine
o and on again.
●
If the problem persists, consult a specialised
workshop. CUPRA recommends visiting a spe-
cialised CUPRA dealer or any SEAT dealership.

Related Topics

Popular Owner Manuals