2024-2026 Cupra Terramar SUV Assistant systems -> Eco Assist User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Assistant systems -> Eco Assist for Your Cupra Terramar SUV First Generation (2024-2026)

Assistant systems
203
Eco Assist
●
When the system recognises a new speed
limit, a warning is displayed on the instrument
cluster. This speed will be stored in the speed
limiter.
The system has recognised a new speed
limit and uses it for regulation.
Interrupting speed adjustment
●
Press the button on the multifunction
steering wheel or release and press the accel-
erator pedal twice. The last saved speed is re-
sumed.
●
Press the button on the multifunction
steering wheel. The current speed is taken.
●
Press the button on the multifunction
steering wheel. The system switches to a pas-
sive state.
Adjust the displayed speed using the buttons
on the multifunction steering wheel
+ 1 km/h (1mph)
- 1 km/h (1mph)
+ 10 km/h (5mph)
- 10 km/h (5mph)
If you adjust the indicated speed excessively,
the proactive speed adjustment is interrupted.
Note
●
When a speed restriction is recognised, the
proactive speed adjustment also adapts the
saved speed, even if the speed limiter is not
active.
●
If the speed of travel considerably exceeds
the speed limit detected by the road signal
detection system, a relevant warning is dis-
played in the instrument cluster display.
●
When merging onto a motorway or dual
carriageway, the recommended speed is au-
tomatically saved as the desired speed.
Troubleshooting
A message is displayed indicating that pro-
active speed adjustment is not currently
available or not oered in your country.
●
If this message is displayed for a longer pe-
riod of time and proactive speed adjustment
is available in your country, please contact a
specialist workshop.
Note
Depending on the anomaly in question, addi-
tional information may be displayed in Vehi-
cle status ›››page41.
Eco Assist
Fig.132 Eco Assist indication (schematic
representation).
Eco-eicient driving assistance helps you drive
with care and with low energy consumption
by following instructions superimposed in the
digital cockpit, depending on the situation.
When you approach places such as a junc-
tion, a roundabout or a section of road with
a speed limit, the symbol
is displayed along
with an event on the digital instrument cluster
›››Fig.132.
As soon as you follow the indication and
take your foot o the accelerator, the vehicle
adapts, based on the selected drive prole and
distance to the event, brake energy recupera-
tion and speed.
204
Assistant systems
Eco Assist uses the trip data from the infotain-
ment system and the sensors of certain driver
assistance systems. If no destination guidance
is active, the most likely route is used.
Pressing the accelerator can cancel the inter-
vention of the assistance at any time.
Eco Assist can be activated and deactivated in
the infotainment system, in the assistance sys-
tem settings ›››page39.
Eco Assist is temporarily deactivated if:
●
The gear selector is in the S position.
●
The Performance or CUPRA drive prole is
used.
●
Driving with adaptive cruise control (ACC) or
cruise control (GRA).
When these conditions no longer exist, the as-
sistance is reactivated if it is switched on in the
assistance system settings.
Eco Assist is available depending on equip-
ment and not in all countries.
WARNING
The system is not a replacement for driver
awareness.
●
Adapt your speed and driving style at all
times to suit visibility, weather, road and traf-
c conditions.
●
Road signs on the road and traic regula-
tions have priority over eco-driving notes.
Note
●
The appearance of the symbols may vary
slightly depending on the equipment and
model. System updates may modify or ex-
pand the symbols.
●
When the system is active, Eco Assist may
also increase recuperation without display-
ing any indication. This can occur in situa-
tions such as when the accelerator pedal is
released when a vehicle is driving in front. In
this case, energy recuperation is adapted to
match the speed of the vehicle in front with-
out any indication being displayed.
ACC - Adaptive Cruise
Control
Introduction
Adaptive Cruise Control (ACC) maintains a
constant speed set by the driver. When ap-
proaching another vehicle in front, the ACC
detects it and adapts the speed automatically,
maintaining a distance set by the driver.
Does my vehicle have ACC?
Your vehicle has ACC if it has the ACC function
buttons on the multifunction steering wheel
›››
page123, or if it has the conguration
menu in the infotainment system.
Speed range
ACC regulates at speeds between 20 and
210km/h (15 and 130mph).
When Electric mode is activated in hybrid ve-
hicles, the ACC speed range may vary.
The ACC can bring the vehicle to a standstill if
a vehicle in front stops.
Driving with ACC
You can override the ACC at any time. Brak-
ing interrupts the ACC. If you accelerate, reg-
ulation is interrupted during acceleration and
then resumed.
Driver intervention prompt
ACC is subject to certain limitations in-
herent to the system. This means that the
driver will have to control the speed and
distance from other vehicles in certain sit-
uations. In this case, the instrument clus-
ter display will tell you to intervene by
applying the brake, and an audio warning
will be played.
Radar sensors
The ACC uses the front radar technology. Read
its maintenance instructions and information
about its limitations ›››
page194.

Related Topics

Popular Owner Manuals