REAR SEATS
Place the seat belts in their guides A .
For safety reasons, carry
out any adjustments
while the vehicle is sta-
tionary.
Check that the rear seat
belts are positioned and
operating correctly each
time the rear bench seat
Pull the tab 1 and lower the seatback
B.
2
Before moving the seat-
back, put seat belt in belt
guide A to avoid damaging
it.
is moved.
When refitting the seat-
back, make sure it is
correctly locked in place.
If seat covers are fit-
To avoid all risk of injury,
ensure that nobody is in
the proximity of the mov-
ing parts.
ted, make sure these do not pre-
vent the seatback latch from lock-
ing in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.
Make sure that the seat-
back is correctly locked.
If necessary, remove any
obstacles behind the
seats. Repeat the procedure until
the seat is correctly locked.
When moving the rear
seats, ensure that noth-
ing obstructs the anchor-
age points (passenger's
arm or leg, a pet, gravel, cloth,
toys, etc.).
Depending on the vehicle, to unlock
the bench seat C , simultaneously pull
the tabs 1 to unlock from the inside.
To replace the seatback, proceed in
the reverse order to removal.
Refit the seatback and click it back into
place.
58 - Getting to know your vehicle
English 
