2024-2026 Dacia Duster SUV Getting to know your vehicle -> Seat belts User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Getting to know your vehicle -> Seat belts for Your Dacia Duster SUV Third Generation (2024-2026)

SEAT BELTS  
Seat belts  
adjust the position of the steering  
wheel.  
Adjusting the seat belts  
Always wear your seat belt when trav-  
elling in your vehicle. You must also  
comply with the legislation of the par-  
ticular country you are in.  
2
Make sure that the rear  
bench seat 57 is locked  
in position correctly so that  
the rear seat belts will operate  
correctly.  
Before starting, adjust your driving  
position and then have each occu-  
pant adjust their seat belt to ensure  
optimum protection.  
Adjusting your driving position  
(depending on the vehicle)  
Incorrectly adjusted or  
twisted seat belts may  
Sit well back in your seat (having  
removed your coat or jacket, etc.). This  
is essential to ensure that your back is  
positioned correctly;  
adjust the distance between the  
seat and the pedals. Your seat should  
be as far back as possible while still al-  
lowing you to fully depress the pedals.  
The seatback should be adjusted so  
that your arms are slightly bent when  
you hold the steering wheel;  
cause injuries in the  
event of an accident.  
Use one seat belt per person,  
whether child or adult.  
Even pregnant women should  
wear a seat belt. In this case, en-  
sure that the lap belt is not exert-  
ing too much pressure on the ab-  
domen, but do not allow any  
slack.  
To ensure the correct adjustment and  
positioning of the seat belts on all  
seats:  
adjust the seats (seat position and  
seatback angle, if available);  
sit with your back firmly against the  
seatback;  
move the shoulder strap 1 as close  
as possible to the base of the neck  
without it actually resting against it (if  
necessary, adjust the height of the seat  
belt if possible) and make sure that the  
shoulder strap 1 is in contact with the  
shoulder;  
position the lap strap 2 so that it lies  
flat on the thighs and against the  
pelvis.  
adjust the position of your head-  
rest. For maximum safety, your head  
must be as close as possible to the  
headrest;  
adjust the height of the seat. This  
adjustment allows you to select the  
seat position which offers you the best  
possible view;  
Getting to know your vehicle - 59  
SEAT BELTS  
The seat belt must be worn as close to  
the body as possible. e.g. avoid wear-  
ing heavy clothing, keeping bulky ob-  
jects under the belts, etc.  
2
Locking  
Unwind the belt slowly and smoothly  
and ensure that the buckle 3 locks into  
the catch 5 (check that it is locked by  
pulling on the buckle 3).  
If the belt jams, allow it to return slight-  
ly before attempting to unwind it again.  
If your seat belt is completely jammed,  
pull slowly, but firmly, so that just over  
3 cm unwinds. Allow it to return slightly  
before attempting to unwind it again.  
Front and rear seat belt reminder  
warning  
If there is still a problem, contact an  
approved dealer.  
Seat belt reminder warning  
lights  
With the doors closed, the graphic 6 is  
displayed on the instrument panel for  
approximately 60 seconds when the  
vehicle ignition is switched on. This in-  
forms the driver of the fastening status  
of each of the seat belts every time:  
Unlocking  
This warning light appears on the cen-  
tral display A when the ignition is  
switched on and if the driver’s and/or  
front passenger and/or rear passenger  
seat belt(s) (if the seat is occupied) is  
not fastened.  
Press the button 4 and the seat belt  
will be rewound by the inertia reel.  
Guide the belt.  
the doors are opened during driving  
(vehicle speed above zero);  
a seat belt is fastened/unfastened.  
Understanding the graphic 6:  
seat belt fastened;  
seat occupied and seat belt  
unfastened;  
60 - Getting to know your vehicle  
SEAT BELTS  
the doors are opened during driving  
(vehicle speed above zero);  
a seat belt is fastened/unfastened.  
seat not occupied.  
symbol appears for the seat  
concerned.  
Always make sure that the passengers  
are properly fastened in and that the  
number of seat belts indicated as fas-  
tened corresponds to the number of  
seats occupied.  
With the doors closed, the  
warn-  
Understanding the graphic 7:  
2
ing light appears on the central display  
when the vehicle ignition is switched  
on if the driver's and/or passenger's  
seat belt(s) (if this seat is occupied)  
are not fastened.  
symbol in green: seat belt fastened;  
symbol in red: the seat is occupied  
and the seat belt is not fastened;  
symbol in grey: seat not occupied.  
Note: in some cases, the warnings  
may be triggered if an object is placed  
on one of the seats.  
When the vehicle speed is less than  
approximately 12 mph (20 km/h), the  
With the doors closed, the  
warn-  
ing light appears on the central display  
when the vehicle ignition is switched  
on if the driver's and/or passenger's  
seat belt(s) (if this seat is occupied)  
are not fastened.  
warning light appears on the  
central display if a seat is occupied  
and the seat belt is not fastened. It is  
accompanied by the graphic 6 which  
appears for approximately 60 seconds  
each time one of the seat belts is fas-  
tened or unfastened.  
When the vehicle speed is less than  
approximately 12 mph (20 km/h), the  
warning light appears on the  
When the vehicle speed reaches or  
exceeds 12 mph (20 km/h), if one of  
the seat belts is or becomes unfas-  
tened during the journey:  
central display if a seat is occupied  
and the seat belt is not fastened. It is  
accompanied by the graphic 7 which  
appears for approximately 60 seconds  
each time one of the seat belts is fas-  
tened or unfastened.  
the  
warning light flashes on  
the central display;  
When the vehicle speed reaches or  
exceeds 12 mph (20 km/h), if one of  
the seat belts is or becomes unfas-  
tened during the journey:  
and  
With the doors closed, the graphic 7 is  
displayed on the instrument panel for  
approximately 60 seconds when the  
vehicle ignition is switched on. This in-  
forms the driver of the fastening status  
of each of the seat belts every time:  
a beep sound for approximately 120  
seconds;  
and  
the  
warning light flashes on  
the graphic 6 is displayed for ap-  
proximately 180 seconds and the  
the central display;  
and  
Getting to know your vehicle - 61  
SEAT BELTS  
a beep sound for approximately 120  
seconds;  
Rear seat belts  
Rear seat belts 8  
and  
2
the graphic 7 is displayed for ap-  
proximately 180 seconds and the sym-  
bol for the seat concerned appears in  
red.  
Always make sure that the passengers  
are properly fastened in and that the  
number of seat belts indicated as fas-  
tened corresponds to the number of  
seats occupied.  
Note: in some cases, the warnings  
may be triggered if an object is placed  
on one of the seats.  
Make sure that the rear  
bench seat 57 is locked  
in position correctly so that  
the rear seat belts will operate  
correctly.  
The belts are fastened, unfastened  
and adjusted in the same way as the  
front belts.  
Check that the rear seat  
belts are positioned and  
operating correctly each  
time the rear seats are  
moved.  
62 - Getting to know your vehicle  

Related Topics

Popular Owner Manuals