Advertisement

Advertisement

Starting And Operating -> Co?Driver System With Follow To Stop - Traffic Jam Assist for Your Fiat 500 E 4 Door Second Generation (2020-2024)

STARTING AND OPERATING 87  
notify you to place your hands back on the steering  
wheel.  
If the set speed is less than 35 mph (60 km/h) the  
Co-Driver system will not work;  
NOTE:  
If the speed of Adaptive Cruise Control (ACC) can be  
set to a higher than a top speed of 90 mph (150  
km/h), the Co-Driver feature will not be available.  
The Co-Driver system can take a few seconds to  
activate once all conditions are met. During this time,  
a grey indication will appear on the instrument panel  
display and the system will be activated automatically  
as soon as all conditions are met, without any  
intervention by the driver.  
ACTIVATION AND DEACTIVATION  
To activate the system, press the  
steering wheel.  
button on the  
To deactivate the system press the button again.  
Suspension conditions  
Objects Moving in Perpendicular Direction Example  
4
System operation are temporarily paused under the  
following scenarios:  
CO–DRIVER SYSTEM WITH FOLLOW TO  
STOP - TRAFFIC JAM ASSIST  
The Co-Driver system combines the features of Active  
Cruise Control (ACC) and lane centering logic to control  
the trajectory of the car's path, maintaining it as  
close to the center of the lane as possible while also  
managing speed.  
When the ACC system gets deactivated or inhibited  
page 79.  
ð
Tight bends in the road.  
If the lines on the road are not detected accurately.  
When one of the two lines on the road are is  
damaged or broken.  
Co-Driver System On/Off Button  
The following conditions must be met before the Co-  
Driver system turns on:  
This driving assistance system can be activated on all  
types of roads.  
When the sun is low, causing glare on the windshield  
camera.  
The system information from the front camera to assist  
you in keeping the car steadily centered in the lane at a  
consistent speed.  
Activate the Co-Driver system by pressing the  
button on the steering wheel.  
If the driver activates the left or right turn signal.  
When the driver intentionally switches lanes without  
using the corresponding turn signal.  
Adaptive Cruise Control (ACC) must be in the ON.  
OPERATION  
The vehicle speed must be between 35 mph and 90  
mph (60 km/h and 150 km/h).  
In the event of system irregularities.  
The system only works when the driver keeps their  
hands on the steering wheel. If the system senses that  
hands have been taken off the steering wheel, it will  
When the vehicle speed exceeds the maximum limit.  
If lateral acceleration becomes too high.  
Camera system functioning properly.  
Turn signals must not be activated.  
88 STARTING AND OPERATING  
Automatic deactivation  
When the system does not detect hands on the  
steering wheel for a few seconds, it will warn the driver  
by displaying a dedicated screen in the center of the  
instrument cluster display.  
The Co-Driver system will automatically deactivate if you  
take your hands off the steering wheel for 45 seconds.  
When the Co-Driver is paused the associated graphics  
in the designated area will turn grey.  
SYSTEM STATUS  
When the steering wheel detects hands are on, the Co-  
Driver will be reactivated without any additional action  
needed from the driver.  
System active: A properly functioning system is verified  
by the display on the instrument panel. If hands  
are taken off the steering wheel, the system won't shut  
down immediately, only after a brief period: A series of  
dedicated screens will subsequently appear in  
WARNING!  
succession on the instrument panel to remind the  
driver to place their hands back on the steering wheel.  
It is dangerous to leave the device on when it is not  
used. There is a risk of inadvertently activating it and  
losing control of the car due to unexpected excessive  
speed.  
System Active — Yellow  
Hands removed from the steering wheel for a short  
time: As soon as you take your hands off the steering  
wheel, the system will provide this warning on the  
instrument panel display. The system will remain active.  
If the driver doesn't reposition their hands on the  
steering wheel within a few seconds, the following  
message will appear on the instrument cluster display.  
INDICATIONS ON THE DISPLAY  
The system status can always be viewed through a  
dedicated area on the instrument panel display.  
The system status is indicated by the color of the  
symbol.  
If the driver's hands are not on the steering wheel, a  
series of warnings will appear on the instrument panel  
display to alert the driver that he needs to reposition his  
hands on the steering wheel. Acoustic signals will also  
be emitted.  
System Active  
After a certain period of time, the Co-Driver system  
will be disabled if the driver has not repositioned their  
hands on the steering wheel.  
System Active — Red  
STARTING AND OPERATING 89  
Hands removed from the steering wheel for a long  
time: If your hands aren't placed on the steering wheel,  
the screen will be displayed on the instrument cluster,  
along with an audible warning. If you fail to return your  
hands to the steering wheel after an extended duration,  
a deactivation message will show up on the instrument  
panel. Subsequently, the steering wheel control will be  
deactivated.  
Limited visibility (due to heavy rain, snow, fog, etc.).  
CO–DRIVER SYSTEM WITH STOP & GO –  
ADAPTIVE CRUISE CONTROL WITH STOP &  
GO — IF EQUIPPED  
Glare from the headlights of oncoming vehicles,  
direct sunlight, or shade.  
Interference, damage, or blockages caused by mud,  
ice, snow, and similar obstructions.  
Interference from other equipment emitting  
electromagnetic waves.  
WARNING!  
When the Co-Driver system is active, LaneSense (if  
equipped) takes a temporary pause. When the Co-  
Driver system is not in operation, LaneSense (if  
previously enabled) remains accessible. For additional  
The device can take the vehicle to a standstill but the  
driver must always be ready to apply the brakes, if  
necessary.  
Presence of roadworks or road construction sites.  
If the indications given by the navigation system (if  
equipped) are not yet ready and/or if the navigation  
system is recalculating the route.  
details on the LaneSense system, see  
page 106  
The Adaptive Cruise Control with Stop & Go is a driver  
assistance feature that merges Cruise Control functions  
with distance control function from the vehicle in  
ahead.  
ð
4
SYSTEM OPERATION/LIMITATIONS  
The Co-Driver system may experience limited or  
This system enables the car to maintain the desired  
speed without requiring the driver to press the  
accelerator as well as maintain the distance set by the  
driver from the vehicle ahead.  
reduced functionality under the following conditions:  
Unclear or poorly visible lane marking lines, such as  
in heavy rain, snow, fog, etc.  
Damage, coverage, or obstruction of the camera, like  
by mud, ice, snow, etc.  
The system uses a radar sensor, located behind the  
front bumper and a camera, located in the middle area  
of the windscreen, to detect the presence of a vehicle  
close ahead.  
When driving in hilly terrain or on roads with sharp  
turns.  
In proximity to toll gates.  
System Deactivated  
When highway entrances or exits exceed 20 feet (6  
meters) in width.  
SYSTEM AVAILABILITY  
When the camera is exposed to intense and blinding  
light, such as reflections or direct sunlight.  
External factors and conditions may affect the proper  
operation of the Co-Driver system.  
Some of the primary factors include:  
Narrow, winding and curvy roads.