Advertisement

Advertisement

Getting To Know Your Instrument Panel -> Instrument Cluster for Your Fiat 500 L 4 Door First Generation (2012-2022)

88 GETTING TO KNOW YOUR INSTRUMENT PANEL  
INSTRUMENT CLUSTER  
Instrument Cluster  
2. Instrument Cluster Display  
Instrument Cluster Descriptions  
The instrument cluster display shows messages when  
the appropriate conditions exist. Refer to “Instrument  
Cluster Display” in “Getting To Know Your Instru-  
ment Panel” for further information.  
1. Speedometer  
Indicates vehicle speed.  
GETTING TO KNOW YOUR INSTRUMENT PANEL 89  
3. Tachometer  
CAUTION!  
Indicates the engine speed in revolutions per minute  
Driving with a hot engine cooling system could dam-  
age your vehicle. If the temperature gauge reads “H,”  
pull over and stop the vehicle. Idle the vehicle with the  
air conditioner turned off until the pointer drops back  
into the normal range. If the pointer remains on the  
“H,” turn the engine off immediately and call an  
authorized dealer for service.  
(RPM x 1000).  
4. Temperature Gauge  
The temperature gauge shows engine coolant tem-  
perature. Any reading within the normal range indi-  
cates that the engine cooling system is operating  
satisfactorily.  
4
The gauge pointer will likely indicate a higher tem-  
perature when driving in hot weather or up mountain  
grades. It should not be allowed to exceed the upper  
limits of the normal operating range.  
5. Fuel Gauge  
The pointer shows the level of fuel in the fuel tank  
when the ignition switch is in the ON/RUN position.  
WARNING!  
The fuel pump symbol points to the side of the  
vehicle where the fuel door is located.  
A hot engine cooling system is dangerous. You or  
others could be badly burned by steam or boiling  
coolant. You may want to call an authorized dealer for  
service if your vehicle overheats. If you decide to look  
under the hood yourself, see “Servicing And Mainte-  
nance.” Follow the warnings under the Cooling System  
Pressure Cap paragraph.  
90 GETTING TO KNOW YOUR INSTRUMENT PANEL  
INSTRUMENT CLUSTER DISPLAY  
Your vehicle may be equipped with an instrument cluster  
display, which offers useful information to the driver. With  
the ignition in the STOP/OFF position, opening/closing of  
a door will activate the display for viewing, and display  
the total miles (kilometers) in the odometer. Your instru-  
ment cluster display is designed to display important  
information about your vehicle’s systems and features.  
Using a driver interactive display located on the instru-  
ment panel, your instrument cluster display can show you  
how systems are working and give you warnings when  
they aren’t. The steering wheel mounted controls allow  
you to scroll through and enter the main menus and  
submenus. You can access the specific information you  
want and make selections and adjustments.  
Instrument Cluster Display