GETTING TO KNOW YOUR VEHICLE 65
To open the sunroof partway, push the power sunroof
switch briefly and release it when you want the sunroof to
stop.
Sunroof Reinitialization
1. Place the ignition in the ON/RUN mode.
2. Pull and hold the power sunroof close switch until the
sunroof is completely closed and you hear an audible
click.
NOTE: During Express Open operation, any movement of
the sunroof switch will stop the sunroof.
3
Closing
3. Pull and hold the power sunroof close switch again
within five seconds. Do not release the switch.
With the sunroof in the full open position, pull and hold
the power sunroof switch for approximately one second
and release. The sunroof will close completely, then stop
automatically. This is called “Express Close.” To close the
sunroof partway, pull the power sunroof switch briefly and
release it when you want the sunroof to stop.
4. As the power sunroof close switch is held, the sunroof
panel will open completely and then close again.
5. Once all sunroof motion has stopped, release the power
sunroof close switch.
NOTE: During Express Close operation, any movement of
NOTE: If the switch is released prior to completion of this
the sunroof switch will stop the sunroof.
procedure, the procedure must be repeated.
Anti-Pinch Protect Feature
6. Confirm that express operation is functional for open
and close operations.
This feature will detect an obstruction in the closing of the
sunroof during the Express Close operation. If an obstruc-
tion in the path of the sunroof is detected, the sunroof will
automatically retract. Remove the obstruction if this oc-
curs.