Advertisement

Advertisement

2012-2022 Fiat 500 L 4 Door Getting To Know Your Vehicle User Manual

MY CAR USER MANUAL

Getting To Know Your Vehicle for Your Fiat 500 L 4 Door First Generation (2012-2022)

GETTING TO KNOW YOUR VEHICLE  
CONTENTS  
3
Ⅵ KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
▫ Key With Remote Control. . . . . . . . . . . . . . . . . .16  
Ⅵ IGNITION SWITCH . . . . . . . . . . . . . . . . . . . . . . .18  
▫ Ignition Switch . . . . . . . . . . . . . . . . . . . . . . . . .18  
▫ Key-In-Ignition Reminder . . . . . . . . . . . . . . . . .20  
Ⅵ SENTRY KEY . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
▫ Key Programming . . . . . . . . . . . . . . . . . . . . . .20  
▫ Replacement Keys . . . . . . . . . . . . . . . . . . . . . . .20  
▫ General Information . . . . . . . . . . . . . . . . . . . . .21  
Ⅵ VEHICLE SECURITY ALARM . . . . . . . . . . . . . . .21  
▫ To Arm The System . . . . . . . . . . . . . . . . . . . . .21  
▫ To Disarm The System . . . . . . . . . . . . . . . . . . . .22  
Ⅵ DOORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
▫ Power Door Locks . . . . . . . . . . . . . . . . . . . . . .23  
▫ Doors Lock With One Or More Doors Open. . . . .25  
▫ Auto-Relocking (Only For Rear Doors). . . . . . . . .25  
▫ Child-Protection Door Lock System  
(Rear Doors) . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Ⅵ SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
▫ Manual Adjustment (Front Seats) . . . . . . . . . . . .26  
▫ Manual Adjustment (Rear Seats) . . . . . . . . . . . . .28  
▫ Power Adjustment (Front Seats) — If Equipped . .32  
▫ Heated Seats — If Equipped . . . . . . . . . . . . . . . .33  
▫ Rear Armrest — If Equipped . . . . . . . . . . . . . . .34  
Ⅵ HEAD RESTRAINTS . . . . . . . . . . . . . . . . . . . . . .34  
▫ Reactive Head Restraints — Front Seats . . . . . . .34  
▫ Central Lock/Unlock (Switch Safe Lock Device) —  
If Equipped. . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
14 GETTING TO KNOW YOUR VEHICLE  
▫ Rear Head Restraint Adjustment . . . . . . . . . . . . .35  
▫ Flash-To-Pass . . . . . . . . . . . . . . . . . . . . . . . . . .43  
▫ Parking Lights . . . . . . . . . . . . . . . . . . . . . . . . .43  
▫ Follow Me Home/Headlight Delay . . . . . . . . . . .43  
▫ Front Fog Lights — If Equipped . . . . . . . . . . . . .43  
▫ Courtesy Lights/Approaching Lights. . . . . . . . . .44  
Ⅵ INTERIOR LIGHTS . . . . . . . . . . . . . . . . . . . . . . .44  
▫ Interior Lights Controls . . . . . . . . . . . . . . . . . . .44  
Ⅵ WIPERS AND WASHERS . . . . . . . . . . . . . . . . . . .47  
▫ Front Wiper Operation . . . . . . . . . . . . . . . . . . . .47  
▫ Rear Wiper/Washer Operation . . . . . . . . . . . . . .49  
Ⅵ CLIMATE CONTROLS . . . . . . . . . . . . . . . . . . . . .50  
▫ Manual Climate Control Overview . . . . . . . . . . .50  
▫ Automatic Climate Control Overview . . . . . . . . .54  
▫ Climate Control Functions . . . . . . . . . . . . . . . . .58  
▫ Automatic Temperature Control (ATC) . . . . . . . .58  
▫ Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . .59  
Ⅵ WINDOWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61  
▫ Front Head Restraint Removal . . . . . . . . . . . . . .36  
▫ Rear Head Restraint Removal . . . . . . . . . . . . . . .37  
Ⅵ STEERING WHEEL . . . . . . . . . . . . . . . . . . . . . . .37  
▫ Tilt/Telescoping Steering Column . . . . . . . . . . . .37  
Ⅵ MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
▫ Inside Day/Night Mirror . . . . . . . . . . . . . . . . . .38  
▫ Automatic Dimming Mirror — If Equipped . . . . .38  
▫ Conversation Mirror — If Equipped . . . . . . . . . .39  
▫ Power Mirrors . . . . . . . . . . . . . . . . . . . . . . . . .40  
▫ Folding Mirrors . . . . . . . . . . . . . . . . . . . . . . . . .40  
▫ Heated Mirrors — If Equipped . . . . . . . . . . . . .40  
▫ Illuminated Vanity Mirrors — If Equipped . . . . .41  
Ⅵ EXTERIOR LIGHTS . . . . . . . . . . . . . . . . . . . . . . .42  
▫ Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
▫ Daytime Running Lights — If Equipped . . . . . . .42  
▫ High Beams . . . . . . . . . . . . . . . . . . . . . . . . . . .43  
GETTING TO KNOW YOUR VEHICLE 15  
▫ Power Windows . . . . . . . . . . . . . . . . . . . . . . . .61  
▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . . .63  
Ⅵ POWER SUNROOF — IF EQUIPPED . . . . . . . . . .64  
▫ Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64  
▫ Closing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65  
▫ Anti-Pinch Protect Feature . . . . . . . . . . . . . . . . .65  
▫ Sunroof Reinitialization . . . . . . . . . . . . . . . . . . .65  
▫ Wind Buffeting . . . . . . . . . . . . . . . . . . . . . . . . .66  
▫ Power Sun Blind . . . . . . . . . . . . . . . . . . . . . . . .66  
Ⅵ HOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  
▫ Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  
▫ Closing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  
Ⅵ LIFTGATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68  
▫ Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68  
▫ Cargo Area Features . . . . . . . . . . . . . . . . . . . . .70  
Ⅵ GARAGE DOOR OPENER — IF EQUIPPED . . . . .75  
▫ Before You Begin Programming HomeLink . . . . .76  
▫ Programming A Rolling Code . . . . . . . . . . . . . . .76  
▫ Programming A Non-Rolling Code . . . . . . . . . . .78  
▫ Canadian/Gate Operator Programming . . . . . . . .78  
▫ Using HomeLink . . . . . . . . . . . . . . . . . . . . . . . .79  
▫ Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80  
▫ Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . .80  
▫ General Information. . . . . . . . . . . . . . . . . . . . . .81  
Ⅵ INTERNAL EQUIPMENT . . . . . . . . . . . . . . . . . . .81  
▫ Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81  
▫ Cupholders . . . . . . . . . . . . . . . . . . . . . . . . . . .83  
▫ Power Outlets . . . . . . . . . . . . . . . . . . . . . . . . .83  
▫ Cigar Lighter — If Equipped . . . . . . . . . . . . . . .84  
Ⅵ ROOF LUGGAGE RACK — IF EQUIPPED . . . . . . .85  
3
16 GETTING TO KNOW YOUR VEHICLE  
KEYS  
NOTE: The authorized dealer that sold you your vehicle  
has the key code numbers for your vehicle locks. These  
numbers can be used to order duplicate keys from your  
authorized dealer.  
Key With Remote Control  
The Remote Keyless Entry (RKE) key fob contains an  
integrated key. To use the mechanical key, simply push the  
mechanical key release button.  
To Unlock The Doors And Liftgate  
Push and release the unlock button on the key fob once to  
unlock the driver’s door or twice, within five seconds, to  
unlock all doors, and the liftgate. The turn signal lights will  
flash to acknowledge the unlock signal. The illuminated  
entry system will also turn on.  
To Lock The Doors And Liftgate  
Push and release the lock button on the key fob to lock all  
doors and the liftgate. The turn signal lights will flash and  
the horn will chirp to acknowledge the signal.  
Locking Doors With A Key  
1. Insert the key with either side up.  
2. Turn the key to the right to lock the door.  
3. Turn the key to the left to unlock the door.  
Integrated Key  
1 — Mechanical Key Release  
Button  
3 — Lock Button  
2 — Unlock Button  
4 — Liftgate Button  
GETTING TO KNOW YOUR VEHICLE 17  
Replacing The Battery In The Key With Remote  
Control  
2. Turn the screw to unlock using a small screwdriver.  
3. Take out the battery case and replace the battery making  
sure that polarities are correct.  
4. Refit the battery case inside the key and lock it turning  
the screw to lock.  
3
NOTE: Used batteries should be properly disposed of as  
specified by law, see an authorized dealer for assistance  
needed.  
Programming Additional Key Fobs  
Refer to “Sentry Key” in “Getting To Know Your Vehicle”  
for further information.  
If you do not have a programmed key fob, contact an  
authorized dealer for details.  
Key Fob Components  
Request For Additional Remote Controls  
1 — Mechanical Key  
2 — Mechanical Key Release Button  
3 — Battery  
4 — Battery Case  
5 — Screw  
The system can recognize up to eight remote controls.  
Should a new remote control be necessary, go to an  
authorized dealer, taking an ID document and the car  
ownership documents.  
To replace the battery, proceed as follows:  
1. Push mechanical release button to open the mechanical  
key.  
18 GETTING TO KNOW YOUR VEHICLE  
General Information  
IGNITION SWITCH  
Ignition Switch  
The following regulatory statement applies to all radio  
frequency (RF) devices equipped in this vehicle:  
The ignition switch can be turned to three different posi-  
tions:  
This device complies with Part 15 of the FCC Rules and  
with Industry Canada license-exempt RSS standard(s).  
Operation is subject to the following two conditions:  
• STOP: engine off, key can be removed. Some electrical  
devices (e.g. sound system, central door locking system,  
etc.) can operate.  
1. This device may not cause harmful interference, and  
NOTE: The transmission must be shifted into PARK before  
the key is turned to the OFF position. Then, the key can be  
removed.  
2. This device must accept any interference received, in-  
cluding interference that may cause undesired opera-  
tion.  
• AVV: engine start-up.  
NOTE: Changes or modifications not expressly approved  
by the party responsible for compliance could void the  
user’s authority to operate the equipment.  
• MAR: driving position. All electrical devices are en-  
abled.  
If the key is turned to the OFF/LOCK position before  
shifting into park, the key will have to be moved to the  
driving (MAR) position and back to OFF/LOCK. Then, the  
key can be removed.  
GETTING TO KNOW YOUR VEHICLE 19  
WARNING! (Continued)  
• Never leave children alone in a vehicle, or with  
access to an unlocked vehicle.  
• Allowing children to be in a vehicle unattended is  
dangerous for a number of reasons. A child or others  
could be seriously or fatally injured. Children  
should be warned not to touch the parking brake,  
brake pedal or the gear selector.  
3
• Do not leave the key fob in or near the vehicle, or in  
a location accessible to children. A child could oper-  
ate power windows, other controls, or move the  
vehicle.  
• Do not leave children or animals inside parked  
vehicles in hot weather. Interior heat build-up may  
cause serious injury or death.  
Ignition Switch  
3 — AVV (START)  
1 — STOP (OFF/LOCK)  
2 — MAR (ACC/ON/RUN)  
WARNING!  
CAUTION!  
• Before exiting a vehicle, always shift the automatic  
transmission into PARK or the manual transmission  
into FIRST gear or REVERSE, apply the parking  
brake, then turn the engine OFF, remove the key fob  
from the vehicle and lock your vehicle.  
An unlocked vehicle is an invitation. Always remove  
the key from the ignition and lock all doors when  
leaving the vehicle unattended.  
(Continued)  
20 GETTING TO KNOW YOUR VEHICLE  
Key-In-Ignition Reminder  
CAUTION!  
Opening the driver’s door when the key is in the ignition  
and the ignition switch position is in the OFF/LOCK  
position, a signal sounds to remove the key.  
• Always remove the Sentry Key from the vehicle and  
lock all doors when leaving the vehicle unattended.  
• The Sentry Key Immobilizer system is not compat-  
ible with some aftermarket remote starting systems.  
Use of these systems may result in vehicle starting  
problems and loss of security protection.  
SENTRY KEY  
The Sentry Key Immobilizer System prevents unauthor-  
ized vehicle operation by disabling the vehicle. The system  
does not need to be armed or activated. Operation is  
automatic, regardless of whether the vehicle is locked or  
unlocked.  
All of the keys provided with your new vehicle have been  
programmed to the vehicle electronics.  
Key Programming  
The system uses ignition keys which have an embedded  
electronic chip (transponder) to prevent unauthorized ve-  
hicle operation. Therefore, only keys that are programmed  
to the vehicle can be used to start and operate the vehicle.  
Programming key fobs may be performed at an authorized  
dealer.  
Replacement Keys  
NOTE: A key which has not been programmed is also  
considered an invalid key, even if it is cut to fit the ignition  
switch lock cylinder for that vehicle.  
NOTE: Only keys that have been programmed to the  
vehicle electronics can be used to start the vehicle. Once a  
Sentry Key has been programmed to a vehicle, it cannot be  
programmed to any other vehicle. When having the Sen-  
try Key Immobilizer System serviced, bring all vehicle  
keys with you to an authorized dealer.  
If the vehicle security light is on after the key is turned to  
the MAR (ACC/ON/RUN) position, it indicates that there  
is a problem with the electronics.  
GETTING TO KNOW YOUR VEHICLE 21  
General Information  
To Arm The System  
The following regulatory statement applies to all radio  
frequency (RF) devices equipped in this vehicle:  
1. Remove the key from the ignition switch and get out of  
the vehicle.  
This device complies with Part 15 of the FCC Rules and  
with Industry Canada license-exempt RSS standard(s).  
Operation is subject to the following two conditions:  
2. Lock the door using either the Central Lock/Unlock  
switch or the Remote Keyless Entry key fob and close all  
doors.  
3
1. This device may not cause harmful interference, and  
3. The horn will sound and the vehicle security light in the  
instrument cluster will switch on for approximately  
three seconds. This shows that the vehicle security  
alarm is about to arm. During this period, if a door is  
opened, the ignition switch is turned to ON/RUN, or  
the power door locks are unlocked in any manner, the  
vehicle security alarm will automatically disarm. After  
approximately three seconds, the vehicle security light  
will flash. This shows that the vehicle security alarm is  
fully armed.  
2. This device must accept any interference received, includ-  
ing interference that may cause undesired operation.  
NOTE: Changes or modifications not expressly approved  
by the party responsible for compliance could void the  
user’s authority to operate the equipment.  
VEHICLE SECURITY ALARM  
The vehicle security alarm monitors the vehicle doors for  
unauthorized entry and the ignition switch for unauthor-  
ized operation. While the vehicle security alarm is armed,  
interior switches for door locks and liftgate release are  
disabled. If something triggers the alarm, the vehicle  
security alarm will provide the following audible and  
visible signals: the horn will pulse, the park lamps and/or  
turn signals will flash, and the vehicle security light on the  
instrument panel will flash.  
The activation of the vehicle security alarm is followed by  
a self-diagnosis stage. If a fault is detected during the  
self-diagnosis stage, the horn will sound a second time.  
If the horn sounds a second time, check that all doors, hood  
and liftgate are closed correctly, then rearm the system.  
22 GETTING TO KNOW YOUR VEHICLE  
If the vehicle security alarm sounds the horn a second time  
even when all doors, hood and liftgate are correctly closed,  
a fault has occurred in the operation of the system. Contact  
an authorized dealer.  
Central Lock/Unlock (Switch Safe Lock Device) —  
If Equipped  
This safety device prevents the operation of the interior  
door handles and the door locking/unlocking button.  
To Disarm The System  
It prevents the opening of the doors from inside the  
passenger compartment, serving as an obstacle to break-in  
attempts (e.g. broken window).  
Push unlock on the key fob, or insert the key into the  
ignition switch and turn the ignition switch to the ON/  
RUN position.  
We recommend that you activate the Safe Lock device each  
time you park your car.  
NOTE: The vehicle security alarm will not disarm when  
the metal insert of the key is used on a single door lock  
cylinder.  
The vehicle security alarm is designed to protect your  
vehicle; however, you can create conditions where the  
vehicle security alarm will arm unexpectedly. If you remain  
in the vehicle and lock the doors with the key fob, once the  
vehicle security alarm is armed, when you pull the door  
handle to exit, the alarm will sound. If this occurs, push the  
unlock button on the key fob to disarm the vehicle security  
alarm.  
Safe Lock Device Location  
GETTING TO KNOW YOUR VEHICLE 23  
Activating The Safe Lock Device  
• LED ON: Doors locked. Pushing the central lock/unlock  
button once will unlock all doors. The LED will switch  
off once the doors are unlocked.  
The Safe Lock device is enabled on all the doors by quickly  
double-pushing the lock button on the key fob.  
• LED OFF: Doors unlocked. Pushing the central lock/  
unlock button once will lock all doors. The LED will  
switch on once the doors are locked.  
The direction indicators flash three times and the LED  
above the button flashes to indicate that the Safe Lock  
device has been activated. If one or more of the doors are  
not closed correctly, the Safe Lock device will not activate,  
preventing a person from getting stuck inside the passen-  
ger compartment by entering the car through, and then  
closing, the open door.  
3
Deactivating The Safe Lock Device  
The Safe Lock device deactivates automatically:  
1. By pushing the unlock button on the key fob.  
2. By turning the ignition key to the MAR position.  
DOORS  
Central Lock/Unlock Button  
Power Door Locks  
Once the doors have been locked with the key fob, it will  
no longer be possible to unlock them by pushing central  
lock/unlock button.  
Push the central lock/unlock button located on the instru-  
ment panel, in the switch bank below the radio. The button  
has an LED that indicates whether the doors are locked or  
unlocked.  
24 GETTING TO KNOW YOUR VEHICLE  
NOTE: With central locking active (LED ON), opening one of  
the front doors, it is possible to perform a central unlocking  
(LED OFF). With central locking active (LED ON), in order to  
open one of the rear passenger doors, it is necessary pulling  
the internal door handle twice. With one of the rear door open  
(LED OFF), the unlocking is performed only for that door, not  
for all the vehicle.  
WARNING! (Continued)  
• Never leave children alone in a vehicle, or with  
access to an unlocked vehicle. Leaving children in a  
vehicle unattended is dangerous for a number of  
reasons. A child or others could be seriously or  
fatally injured. Children should be warned not to  
touch the parking brake, brake pedal or the gear  
selector.  
• Allowing children to be in a vehicle unattended is  
dangerous for a number of reasons. A child or others  
could be seriously or fatally injured. Children  
should be warned not to touch the parking brake,  
brake pedal or the gear selector.  
To unlock the front doors, pull the inside door handle to  
the first detent. If the rear doors are locked, you must pull  
the door handle once to unlock the door and pull the door  
handle a second time to open the door.  
WARNING!  
• Do not leave children or animals inside parked  
vehicles in hot weather. Interior heat build-up may  
cause serious injury or death.  
• For personal security and safety in the event of a  
collision, lock the vehicle doors as you drive as well  
as when you park and leave the vehicle.  
• Do not leave the key fob in or near the vehicle, or in  
a location accessible to children. A child could oper-  
ate power windows, other controls, or move the  
vehicle.  
CAUTION!  
•
Before exiting a vehicle, always shift the automatic  
transmission into PARK or the manual transmission  
into FIRST gear or REVERSE, apply the parking brake,  
turn the vehicle OFF, remove the key fobs from vehicle,  
and lock all doors. and lock your vehicle.  
An unlocked vehicle is an invitation. Always remove  
the key from the ignition and lock all doors when  
leaving the vehicle unattended.  
(Continued)  
GETTING TO KNOW YOUR VEHICLE 25  
Doors Lock With One Or More Doors Open  
To Engage Or Disengage The Child-Protection Door Lock  
System  
It is possible to lock the vehicle using the Remote Keyless  
Entry, internal button, or external key fob. The vehicle can  
also be locked if one or more doors are open. At lock  
command request, LED is switched ON. At closing of the  
last door, the vehicle maintains the central locking status if  
key is not inserted in Ignition Device, otherwise the vehicle  
will be unlocked and the LED will be switched OFF.  
1. Open the rear door.  
2. Insert the tip of the key into the lock and rotate  
clockwise to the lock position or counter clockwise to  
unlock position.  
3
3. Repeat steps 1 and 2 for the opposite rear door.  
NOTE: If the key is not inserted in the ignition switch, but  
is inside the vehicle, the system does not recognize the  
presence of the key and after the closing of last door, the  
vehicle remains locked.  
WARNING!  
Avoid trapping anyone in a vehicle in a collision.  
Remember that the rear doors can only be opened from  
the outside with the Child-Protection locks are en-  
gaged (locked).  
Auto-Relocking (Only For Rear Doors)  
With the vehicle locked and all doors closed (LED ON), if  
a passenger opens one of the rear doors (LED OFF), as soon  
as the door is closed, it will be locked again (LED ON).  
NOTE: For emergency exit from the rear seats when the  
Child-Protection Door Lock System is engaged, unlock the  
doors using the central unlock button, roll down the  
window and open the door using the exterior handle.  
Child-Protection Door Lock System (Rear Doors)  
To provide a safer environment for small children riding in  
the rear seats, the rear doors are equipped with Child-  
Protection Door Lock system.  
26 GETTING TO KNOW YOUR VEHICLE  
SEATS  
Manual Adjustment (Front Seats)  
Seats are a part of the Occupant Restraint System of the  
vehicle.  
WARNING!  
• Adjusting a seat while the vehicle is moving is  
dangerous. The sudden movement of the seat could  
cause you to lose control. The seat belt might not be  
adjusted properly and you could be injured. Adjust  
the seat only while the vehicle is parked.  
• Do not ride with the seatback reclined so that the  
shoulder belt is no longer resting against your chest.  
In a collision you could slide under the seat belt and  
be seriously or even fatally injured. Use the recliner  
only when the vehicle is parked.  
WARNING!  
• It is dangerous to ride in a cargo area, inside or  
outside of a vehicle. In a collision, people riding in  
these areas are more likely to be seriously injured or  
killed.  
• Do not allow people to ride in any area of your  
vehicle that is not equipped with seats and seat belts.  
In a collision, people riding in these areas are more  
likely to be seriously injured or killed.  
• Be sure everyone in your vehicle is in a seat and  
using a seat belt properly.  
GETTING TO KNOW YOUR VEHICLE 27  
Forward/Rearward Adjustment  
Seat Height Adjustment  
The adjusting bar is located at the front of the seats, near  
the floor.  
The seat height adjustment lever is located on the outboard  
side of the seat. Pull upward on the lever to raise the seat  
height or push downward on the lever to lower the seat  
height.  
While sitting in the seat, lift up on the bar and move the  
seat forward or rearward. Release the bar once the desired  
position is reached. Then, using body pressure, move  
forward and rearward on the seat to be sure that the seat  
adjusters have latched.  
3
Height Adjustment Lever  
Adjusting Bar  
28 GETTING TO KNOW YOUR VEHICLE  
Recliner Adjustment  
WARNING!  
The recline lever is located on the outboard side of the seat.  
To recline the seat, lean forward slightly, lift the lever, lean  
back to the desired position and release the lever. To return  
the seatback to its normal upright position, lean forward  
and lift the lever. Release the lever once the seatback is in  
the upright position.  
• Adjusting a seat while the vehicle is moving is  
dangerous. The sudden movement of the seat could  
cause you to lose control. The seat belt might not be  
properly adjusted, and you could be severely injured  
or killed. Only adjust a seat while the vehicle is  
parked.  
• Do not ride with the seatback reclined so that the  
seat belt is no longer resting against your chest. In a  
collision, you could slide under the seat belt and be  
severely injured or killed. Use the recliner only when  
the vehicle is parked.  
Manual Adjustment (Rear Seats)  
WARNING!  
Do not pile luggage or cargo higher than the top of the  
seatback. This could impair visibility or become a  
dangerous projectile in a sudden stop or collision.  
Recline Lever  
GETTING TO KNOW YOUR VEHICLE 29  
Rear Seats Forward/Rearward Adjustment  
WARNING!  
The adjusting bar is located at the front of the seats, near  
the floor.  
• Adjusting a seat while driving may be dangerous.  
Moving a seat while driving could result in loss of  
control which could cause a collision and serious  
injury or death.  
3
•
Seats should be adjusted before fastening the seat belts  
and while the vehicle is parked. Serious injury or death  
could result from a poorly adjusted seat belt.  
Reclining Rear Seats  
The recliner handle is located on the outside of the seat  
cushion. To adjust the seatback, lift upward on the handle,  
lean back on the seatback and when you reach the desired  
position, release the handle.  
Adjusting Bar  
While sitting in the seat, lift up on the bar and move the  
seat forward or rearward. Release the bar once the desired  
position is reached. Then, using body pressure, move  
forward and rearward on the seat to be sure that the seat  
adjusters have latched.  
30 GETTING TO KNOW YOUR VEHICLE  
Fold And Tumble Rear Seat  
NOTE:  
• Prior to folding the rear seat, it may be necessary to  
reposition the front seats.  
• Be sure that the front seats are fully upright and posi-  
tioned forward. This will allow the rear seat to fold  
down easily.  
1. Lift the seatback release lever located on the upper  
outboard side of the seat.  
Rear Seat Recliner Handle  
WARNING!  
Do not ride with the seatback reclined so that the  
shoulder belt is no longer resting against your chest. In  
a collision you could slide under the seat belt, which  
could result in serious injury or death.  
Seatback Release Lever  
GETTING TO KNOW YOUR VEHICLE 31  
2. Fold the seatback forward.  
3. Locate the seatback recline lever on the outboard side of  
the seat and lift upward on the lever.  
3
Seatback Folded  
Seatback Recline Lever  
NOTE: You may experience deformation in the seat cush-  
ion from the seat belt buckles if the seats are left folded for  
an extended period of time. This is normal and by simply  
opening the seats to the open position, over time the seat  
cushion will return to its normal shape.  
32 GETTING TO KNOW YOUR VEHICLE  
4. Slowly flip the entire seat forward.  
Power Adjustment (Front Seats) — If Equipped  
Power Lumbar — If Equipped  
Push the power lumbar switch to adjust the lumbar  
support. Release the switch when you reach the desired  
position.  
Folding Rear Seat  
5. Slowly flip the entire seat rearward and firmly lock the  
seat into position.  
6. Raise the rear seatback and firmly lock the seatback into  
position.  
Power Lumbar Switch  
GETTING TO KNOW YOUR VEHICLE 33  
Heated Seats — If Equipped  
NOTE: Once a heat setting is selected, heat will be felt  
within two to five minutes.  
On some models, the front driver and passenger seats may  
be equipped with heaters in both the seat cushions and  
seatbacks. The controls for the front heated seats are  
located on the outer side of the seat.  
WARNING!  
3
• Persons who are unable to feel pain to the skin  
because of advanced age, chronic illness, diabetes,  
spinal cord injury, medication, alcohol use, exhaus-  
tion or other physical condition must exercise care  
when using the seat heater. It may cause burns even  
at low temperatures, especially if used for long  
periods of time.  
• Do not place anything on the seat or seatback that  
insulates against heat, such as a blanket or cushion.  
This may cause the seat heater to overheat. Sitting in  
a seat that has been overheated could cause serious  
burns due to the increased surface temperature of the  
seat.  
Heated Seat Switch  
• Push the heated seat switch once to turn the heated seat  
on.  
• Push the heated seat switch a second time to turn the  
heated seat off.  
34 GETTING TO KNOW YOUR VEHICLE  
Rear Armrest — If Equipped  
WARNING!  
To use the armrest, fold it downward.  
• All occupants, including the driver, should not oper-  
ate a vehicle or sit in a vehicle’s seat until the head  
restraints are placed in their proper positions in  
order to minimize the risk of neck injury in the event  
of a crash.  
• Head restraints should never be adjusted while the  
vehicle is in motion. Driving a vehicle with the head  
restraints improperly adjusted or removed could  
cause serious injury or death in the event of a  
collision.  
Reactive Head Restraints — Front Seats  
The front driver and passenger seats are equipped with  
Reactive Head Restraints. In the event of a rear impact, the  
Reactive Head Restraints will automatically extend for-  
ward, minimizing the gap between the back of the occu-  
pant’s head and the Reactive Head Restraint.  
Folding Rear Seat Armrest  
HEAD RESTRAINTS  
Head restraints are designed to reduce the risk of injury by  
restricting head movement in the event of a rear impact.  
Head restraints should be adjusted so that the top of the  
head restraint is located above the top of your ear.  
To raise the head restraint, pull upward on the head  
restraint. To lower the head restraint, push the adjustment  
button located at the base of the head restraint, and push  
downward on the head restraint.  
GETTING TO KNOW YOUR VEHICLE 35  
WARNING!  
• A loose head restraint thrown forward in a collision  
or hard stop could cause serious injury or death to  
occupants of the vehicle. Always securely stow re-  
moved head restraints in a location outside the  
occupant compartment.  
3
• ALL the head restraints MUST be reinstalled in the  
vehicle to properly protect the occupants. Follow the  
re-installation instructions above prior to operating  
the vehicle or occupying a seat.  
• Do not place items over the top of the Reactive Head  
Restraint, such as coats, seat covers or portable DVD  
players. These items may interfere with the opera-  
tion of the Reactive Head Restraint in the event of a  
collision and could result in serious injury or death.  
Head Restraint  
1 — Release Button  
2 — Adjustment Button  
The Reactive Head Restraints will automatically return to  
their normal position following a rear impact. If the  
Reactive Head Restraints do not return to their normal  
position, see an authorized dealership immediately.  
Rear Head Restraint Adjustment  
The rear seats are equipped with adjustable head restraints,  
the outboard head restraints have two comfort positions,  
while the central head restraint has to be used in the raised  
position. When there are no occupants in the center seat,  
the head restraint can be lowered for maximum visibility  
for the driver. When the center seat is being occupied, the  
head restraint has to be in the raised position.  
NOTE: Do not reposition the head restraint 180 degrees to  
the incorrect position in an attempt to gain additional  
clearance to the back of the head.  
36 GETTING TO KNOW YOUR VEHICLE  
To raise the outboard head restraints, pull upward on the  
head restraint. To lower the head restraints, push the  
adjustment button located at the base of the head restraint,  
and push downward on the head restraint.  
Front Head Restraint Removal  
The head restraints should only be removed by qualified  
technicians, for service purposes only. If either of the head  
restraints require removal, see an authorized dealer.  
WARNING!  
• All occupants, including the driver, should not oper-  
ate a vehicle or sit in a vehicle’s seat until the head  
restraints are placed in their proper positions in  
order to minimize the risk of neck injury in the event  
of a crash.  
• Head restraints should never be adjusted while the  
vehicle is in motion. Driving a vehicle with the head  
restraints improperly adjusted or removed could  
cause serious injury or death in the event of a  
collision.  
Adjustment Buttons  
For proper routing of a Child Seat Tether, refer to “Occu-  
pant Restraints System” in “Safety.”  
GETTING TO KNOW YOUR VEHICLE 37  
Rear Head Restraint Removal  
STEERING WHEEL  
To remove the outboard or center head restraints, raise it as  
far as it can go. Then, push the adjustment button and the  
release button at the base of each post while pulling the  
head restraint up. To reinstall the head restraint, put the  
head restraint posts into the holes and push downward.  
Then, adjust it to the appropriate height.  
Tilt/Telescoping Steering Column  
This feature allows you to tilt the steering column upward  
or downward. It also allows you to lengthen or shorten the  
steering column. The tilt/telescoping control handle is  
located on the steering column, below the turn signal lever.  
3
WARNING!  
• A loose head restraint thrown forward in a collision  
or hard stop could cause serious injury or death to  
occupants of the vehicle. Always securely stow re-  
moved head restraints in a location outside the  
occupant compartment.  
• ALL the head restraints MUST be reinstalled in the  
vehicle to properly protect the occupants. Follow the  
re-installation instructions above prior to operating  
the vehicle or occupying a seat.  
Tilt/Telescoping Control Handle  
38 GETTING TO KNOW YOUR VEHICLE  
To unlock the steering column, pull the control handle  
down. To tilt the steering column, move the steering wheel  
upward or downward as desired. To lengthen or shorten  
the steering column, pull the steering wheel outward or  
push it inward as desired. To lock the steering column in  
position, push the control handle up until fully engaged.  
Headlight glare from vehicles behind you can be reduced  
by moving the small control under the mirror to the night  
position (toward the rear of the vehicle). The mirror should  
be adjusted while the small control under the mirror is set  
in the day position (toward the windshield).  
WARNING!  
Do not adjust the steering column while driving.  
Adjusting the steering column while driving or driv-  
ing with the steering column unlocked, could cause the  
driver to lose control of the vehicle. Failure to follow  
this warning may result in serious injury or death.  
MIRRORS  
Inside Day/Night Mirror  
Adjusting Rearview Mirror  
A single ball joint mirror is provided in the vehicle. It is a  
twist on mirror that has a fixed position at the windshield.  
The mirror installs on the windshield button with a coun-  
terclockwise rotation and requires no tools for mounting.  
The mirror head can be adjusted up, down, left, and right  
for various drivers. The mirror should be adjusted to center  
on the view through the rear window.  
Automatic Dimming Mirror — If Equipped  
This mirror automatically adjusts for headlight glare from  
vehicles behind you. You can turn the feature on or off by  
pushing the button at the base of the mirror. A light to the  
left of the button will illuminate to indicate when the  
dimming feature is activated. The sensor to the right of the  
button does not illuminate.  
GETTING TO KNOW YOUR VEHICLE 39  
NOTE: This feature is disabled when the vehicle is moving  
Conversation Mirror — If Equipped  
in REVERSE.  
There is a conversation mirror located at the top of the  
overhead console.  
3
Automatic Dimming Mirror  
Conversation Mirror Location  
CAUTION!  
To avoid damage to the mirror during cleaning, never  
spray any cleaning solution directly onto the mirror.  
Apply the solution onto a clean cloth and wipe the  
mirror clean.  
40 GETTING TO KNOW YOUR VEHICLE  
To access the conversation mirror, pull downward on the  
mirror until it reaches the open position.  
Power Mirror Controls  
Folding Mirrors  
Conversation Mirror  
The exterior mirrors are hinged to allow the mirror to pivot  
forward or rearward to help avoid damage. The mirror has  
three detent positions: full forward, normal and full rearward.  
Power Mirrors  
The power mirror controls are located on the driver’s door  
trim panel. To adjust a mirror, turn the control knob toward  
the left or right mirror positions indicated. Tilt the control  
wand in the direction you want the mirror to move. When  
you are finished adjusting the mirror, turn the control to  
the center position to prevent accidentally moving a mirror.  
Heated Mirrors — If Equipped  
These mirrors are heated to melt frost or ice. This  
feature will be activated whenever you turn on the  
rear window defroster (if equipped). Refer to “Climate  
Controls” in “Getting To Know Your Vehicle” for further  
information.  
GETTING TO KNOW YOUR VEHICLE 41  
Illuminated Vanity Mirrors — If Equipped  
Sun Visor “Slide-On-Rod” Feature — If Equipped  
An illuminated vanity mirror is located on the sun visor. To  
use the mirror, rotate the sun visor downward and swing  
the mirror cover upward. The light turns on automatically.  
Closing the mirror cover turns off the light.  
The sun visor “Slide-On-Rod” feature allows for additional  
flexibility in positioning the visor to block out the sun.  
To use the “Slide-On-Rod” feature, rotate the sun visor  
downward and unclip it. Pull the sun visor along the  
“Slide-On-Rod” until the sun visor is in the desired posi-  
tion.  
3
Illuminated Vanity Mirror  
“Slide-On-Rod” Feature  
42 GETTING TO KNOW YOUR VEHICLE  
EXTERIOR LIGHTS  
Headlights  
The multifunction lever, located on the left side of the  
steering wheel, controls the operation of the headlights,  
headlight high beams, lane change assist and turn signals.  
NOTE: The external lights can only be turned on with the  
ignition in the MAR (ACC/ON/RUN) position.  
Headlight Operation  
NOTE: When the headlights are turned on, the Daytime  
Running Lights will be deactivated.  
Daytime Running Lights — If Equipped  
To activate the Daytime Running Lights (DRL), rotate the  
end of the multifunction lever to the O symbol.  
NOTE: The low beams and side/tail lights will not be on  
with DRL.  
Multifunction Lever  
The DRL function can be turned on or off through the  
touchscreen. Refer to “Uconnect Settings” in “Multimedia”  
for further information.  
Rotate the end of the multifunction lever upward to the  
first detent for headlight operation.  
GETTING TO KNOW YOUR VEHICLE 43  
High Beams  
Follow Me Home/Headlight Delay  
With the low beams activated, push the multifunction lever  
forward (toward the front of the vehicle) to turn on the  
high beams. The lever will remain forward in a fixed  
position and the telltale will illuminate in the instrument  
cluster display. Pull the multifunction lever rearward (to-  
ward the rear of the vehicle) to turn off the high beams.  
When this feature is selected, the driver can choose to have  
the headlights remain on for a preset period of time after  
the engine is turned OFF.  
3
Activation  
Remove the key or turn the ignition to the STOP (OFF/  
LOCK) position, and pull the multifunction lever toward  
the steering wheel within two minutes. Each time the lever  
is pulled, the activation of the lights will be extended by 30  
seconds. The activation of the lights can be extended to a  
maximum of 210 seconds.  
Flash-To-Pass  
You can signal another vehicle with your headlights by  
lightly pulling the multifunction lever toward you. This  
will cause the high beam headlights to turn on, and remain  
on, until the lever is released.  
Deactivation  
Parking Lights  
Pull the multifunction lever toward the steering wheel and  
hold it for more than two seconds.  
To turn on the parking lights, remove the key or turn the  
ignition to STOP (OFF/LOCK) position and turn on the  
headlights.  
Front Fog Lights — If Equipped  
The fog light switch is located on the center stack of the  
instrument panel, just below the radio. Push the switch  
once to turn the front fog lights on. Push the switch a  
second time to turn the front fog lights off.  
NOTE: If the parking lights are left on and the key is in the  
stop position with the door open, an audible chime will  
sound and a message will show in the instrument cluster  
display. The chime will stop as soon as the door is closed or  
the lights are switched off.  
44 GETTING TO KNOW YOUR VEHICLE  
Courtesy Lights/Approaching Lights  
INTERIOR LIGHTS  
This feature allows the driver to locate the vehicle when  
parked in dark areas. It can be enabled through the  
Uconnect system.  
Interior Lights Controls  
The interior light switches are located in the overhead  
console. The interior lights can be set to three different  
positions (Off/Left Position, Center Position, On/Right  
Position).  
Through the Uconnect menu, under the “Greeting Lights”  
setting, the driver can choose between the following acti-  
vation times: 0, 30, 60, or 90 seconds.  
Using the switch on the bottom of the overhead console,  
push the switch to the on/right position from its center  
position and the lights are always on.  
To switch off the feature, select 0 seconds.  
When the vehicle is unlocked, the low beams and parking  
lights will turn on for the time specified. Once the door is  
opened, the lights will remain on for an additional three  
minutes, or until all doors are closed. Once all doors are  
closed, the lights will turn off after ten seconds.  
The lights can also be turned off by:  
• Locking the door.  
• Placing the ignition in the START or RUN position.  
Refer to “Uconnect Settings” in “Multimedia” for further  
information.  
On/Right Position  
GETTING TO KNOW YOUR VEHICLE 45  
Push the switch to the off/left position from its center  
position and the lights are always off.  
Leave the switch in the center position, and the lights are  
turned on and off when the doors are opened or closed.  
3
Off/Left Position  
Center Position  
46 GETTING TO KNOW YOUR VEHICLE  
The switches on the left and right sides of the overhead  
console controls the map or reading function of the lights.  
Push the switch to the right to turn on the right light and  
push the switch to the left to turn on the left light.  
Interior Light Timing (Center Position)  
There are four different modes of operation that can be  
activated in this position:  
• When one door is opened, a three minute timer is  
activated.  
• When the key is removed from the ignition (within two  
minutes of the ignition being turned OFF), a 10 second  
timer is activated.  
• When the doors are unlocked with the key fob, a 10  
second timer is activated.  
• When the doors are locked with the key fob, the lights  
will turn off.  
Interior Light Timing (On/Right Position)  
When all doors are closed, a 15 minute timer is activated.  
Map/Reading Light Switches  
NOTE: The timer is deactivated when the key is moved  
into the ON/RUN position.  
CAUTION!  
Before getting out of the vehicle be sure that the switch  
is in the center position or that the lights are off to  
avoid draining the battery.  
GETTING TO KNOW YOUR VEHICLE 47  
WIPERS AND WASHERS  
Windshield Wiper Off  
The windshield wiper/washer lever is located on the right  
side of the steering column.  
This is the normal position of the wiper lever.  
Intermittent Wiper System  
NOTE: The windshield wipers/washers will only operate  
3
Intermittent Low Speed —  
with the ignition in the ON/RUN position.  
Rotate the end of the lever upward to the first detent for  
low intermittent speed to operate the wipers with a fixed  
pause of ten seconds.  
Front Wiper Operation  
There are five different modes of operation for the front  
windshield wipers. The windshield wiper lever can be  
raised or lowered to access these modes.  
Intermittent High Speed —  
Rotate the end of the lever upward to the second detent for  
high intermittent speed to operate the wipers with a delay  
that is dependent on the speed of the vehicle.  
Low Continuous Speed — LO  
Rotate the end of the lever upward to the third detent to  
operate the wipers at a low continuous speed.  
High Continuous Speed — HI  
Rotate the end of the lever upward to the fourth detent to  
operate the wipers at a high continuous speed.  
Windshield Wiper Lever  
48 GETTING TO KNOW YOUR VEHICLE  
Front Windshield Washer Operation  
CAUTION!  
Pull the windshield wiper/washer lever toward the steer-  
ing wheel to activate the washers. The wipers will activate  
automatically for three cycles after the lever is released.  
• Turn the windshield wipers off when driving  
through an automatic car wash. Damage to the wind-  
shield wipers may result if the wiper control is left in  
any position other than off.  
• In cold weather, always turn off the wiper switch and  
allow the wipers to return to the park position before  
turning off the engine. If the wiper switch is left on  
and the wipers freeze to the windshield, damage to  
the wiper motor may occur when the vehicle is  
restarted.  
• Always remove any buildup of snow that prevents  
the windshield wiper blades from returning to the  
off position. If the windshield wiper control is  
turned off and the blades cannot return to the off  
position, damage to the wiper motor may occur.  
Front Windshield Washer Operation  
Manual High Speed/Mist  
Push the lever upward from the off position. The wipers  
will operate at high speed to clear off road mist or spray  
from a passing vehicle. This operation will continue until  
the lever is released. When the lever is released, the wipers  
will return to the off position and automatically shut off.  
GETTING TO KNOW YOUR VEHICLE 49  
Rear Wiper/Washer Operation  
Activation  
Rotate the windshield wiper lever center ring upward to  
operate the rear window wiper as follows:  
3
• In intermittent mode, when the front windshield wiper  
is not operating and the lever is in the  
position.  
(intermittent)  
• In synchronous mode (at half the speed of the front  
window wiper), when the front windshield wiper is  
operating and the lever is in the  
(intermittent)  
position, or when the reverse gear is engaged, the  
front windshield wiper is operating, and the lever is  
in the O (off) position.  
Rear Window Wiper Operation  
• In continuous mode, when the lever is in the  
(con-  
tinuous) position.  
50 GETTING TO KNOW YOUR VEHICLE  
Pushing the windshield wiper lever forward activates the  
rear window washer. Keep the windshield wiper lever  
pushed for more than half a second to activate the rear  
window wiper as well. Releasing the windshield wiper  
lever will activate the smart washing function.  
CLIMATE CONTROLS  
The Climate Control System allows you to regulate the  
temperature, air flow, and direction of air circulating  
throughout the vehicle. The controls are located on the  
touchscreen (if equipped) and on the instrument panel  
below the radio.  
Manual Climate Control Overview  
Rear Window Washer Operation  
Deactivation  
The function stops when the windshield wiper lever is  
released.  
Manual Climate Controls  
GETTING TO KNOW YOUR VEHICLE 51  
Manual Climate Control Descriptions  
Icon  
Description  
A/C Button  
3
Push the A/C button to engage the Air Conditioning (A/C). A LED will illuminate when the  
A/C system is engaged.  
Recirculation Button  
Psuh and release this button to change the system between recirculation mode and outside air  
mode. Recirculation can be used when outside air conditions such as smoke, odors, dust, or  
high humidity are present. Recirculation can be used in all modes except for Defrost. Recircula-  
tion may be unavailable if conditions exist that could create fogging on the inside of the wind-  
shield. The A/C can be deselected manually without disturbing the mode control selection.  
Continuous use of the Recirculation mode may make the inside air stuffy and window fogging  
may occur. Extended use of this mode is not recommended.  
Rear Defrost Button  
Push and release the Rear Defrost Control button to turn on the rear window defroster and the  
heated outside mirrors (if equipped). An indicator will illuminate when the rear window de-  
froster is on. The rear window defroster automatically turns off after twenty minutes.  
Temperature Control  
Use this control to regulate the temperature of the air inside the passenger compartment. Rotat-  
ing the knob counterclockwise, from top center into the blue area of the scale, indicates cooler  
temperatures. Rotating the knob clockwise, into the red area, indicates warmer temperatures.  
52 GETTING TO KNOW YOUR VEHICLE  
Icon  
Description  
Blower Control  
There are seven blower speeds. Use this control to regulate the amount of air forced through the  
system in any mode you select. The blower speed increases as you move the control clockwise  
from the off position.  
NOTE: Depending on the configuration, your vehicle may be equipped with four blower  
speeds.  
Panel Mode  
Panel Mode  
Air comes from the outlets in the instrument panel. Each of these outlets can be individually  
adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be  
moved up and down or side to side to regulate airflow direction. There is a shut off wheel lo-  
cated below the air vanes to shut off or adjust the amount of airflow from these outlets.  
Bi-Level Mode  
Bi-Level Mode  
Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed  
through the defrost and side window demister outlets.  
NOTE: Bi-Level mode is designed under comfort conditions to provide cooler air out of the  
panel outlets and warmer air from the floor outlets.  
Floor Mode  
Floor Mode  
Air comes from the floor outlets. A slight amount of air is directed through the defrost and side  
window demister outlets.  
GETTING TO KNOW YOUR VEHICLE 53  
Icon  
Description  
Mix Mode  
Mix Mode  
Air is directed through the floor, defrost, and side window demister outlets. This setting works  
best in cold or snowy conditions that require extra heat to the windshield. This setting is good  
for maintaining comfort while reducing moisture on the windshield.  
3
Front Defrost  
Mode  
Front Defrost Mode  
Turn the knob clockwise to change the current airflow setting to Defrost mode. Air comes from  
the windshield and side window demist outlets. Use Defrost mode with maximum temperature  
settings for best windshield and side window defrosting and defogging.  
Additional Electric Heater — If Equipped  
• Fan speed set to 1st speed;  
• Temperature Control knob turned completely clockwise  
The additional electric heater ensures more rapid passen-  
ger compartment heating.  
to red section.  
The heater is switched off when at least one of the  
conditions above is no longer verified.  
It activates in cold weather conditions, if the following  
conditions are verified:  
• Outside temperature low;  
• Engine coolant temperature low;  
• Engine on;  
NOTE: The power of the electric heater is modulated  
according to the battery voltage.  
54 GETTING TO KNOW YOUR VEHICLE  
Automatic Climate Control Overview  
Automatic Climate Controls  
Automatic Climate Control Descriptions  
Icon  
Description  
A/C Button  
Push and release to change the current setting, the indicator illuminates when A/C is on. Per-  
forming this function again will cause the A/C operation to switch into manual mode and the  
A/C indicator will turn off.  
GETTING TO KNOW YOUR VEHICLE 55  
Icon  
Description  
Recirculation Button  
Push and release this button to change the system between Recirculation mode and outside air  
mode. Recirculation can be used when outside conditions such as smoke, odors, dust, or high  
humidity are present. Recirculation can be used in all modes. Recirculation may be unavailable  
if conditions exist that could create fogging on the inside of the windshield. The A/C can be  
deselected manually without disturbing the mode control selection. Continuous use of the Recir-  
culation mode may make the inside air stuffy and window fogging may occur. Extended use of  
this mode is not recommended.  
3
AUTO Button  
Automatically controls the interior cabin temperature by adjusting airflow distribution and  
amount. Performing this function will cause the system to switch between manual mode and  
automatic modes.  
Refer to “Automatic Operation” within this section for more information.  
Front Defrost Button  
Push and release to change the current airflow setting to Defrost mode. The indicator illumi-  
nates when this feature is on. Air comes from the windshield and side window demist outlets.  
When the defrost button is selected, the blower level will increase. Use Defrost mode with maxi-  
mum temperature settings for best windshield and side window defrosting and defogging. Per-  
forming this function will cause the ATC to switch into manual mode. If the front defrost mode  
is turned off the climate system will return the previous setting.  
56 GETTING TO KNOW YOUR VEHICLE  
Icon  
Description  
Rear Defrost Button  
Push and release the Rear Defrost Control button to turn ON the rear window defroster and the  
heated outside mirrors (if equipped). An indicator will illuminate when the rear window de-  
froster is on. The rear window defroster automatically turns off after twenty minutes.  
Passenger Temperature Knob  
Provides the passenger with independent temperature control. Rotate the knob clockwise for  
warmer temperature settings. Rotate the knob counterclockwise for cooler temperature settings.  
When the SYNC feature is active, the passenger’s temperature will move with the driver’s tem-  
perature. Acting on the passenger’s temperature will cause the Sync feature turn off.  
Blower Control Knob  
Blower Control is used to regulate the amount of air forced through the climate system. There  
are eight blower speeds available. The speeds can be selected using the blower control knob on  
the faceplate. The blower speed increases as you turn the blower control knob clockwise from  
the lowest blower setting. The blower speed decreases as you turn the blower control knob  
counterclockwise.  
Mode Control: Below are the modes of air distribution that can be selected individually, or in combination with each  
other to reach a desired distribution mode.  
Windshield Mode Windshield Mode  
Air comes from the outlets directed at the windshield meant for defrosting, and side window  
demisting. This setting works best in cold or snowy conditions that require extra heat to the  
windshield.  
GETTING TO KNOW YOUR VEHICLE 57  
Icon  
Description  
Panel Mode  
Panel Mode  
Air comes from the outlets in the instrument panel. Each of these outlets can be individually  
adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be  
moved up and down or side to side to regulate airflow direction. There is a shut off wheel lo-  
cated below the air vanes to shut off or adjust the amount of airflow from these outlets.  
3
Floor Mode  
Floor Mode  
Air comes from the floor outlets. A slight amount of air is directed through the defrost and side  
window demister outlets.  
Climate Control Power Button  
Push and release this button to turn the Climate Control on/off.  
Driver Temperature Knob  
Provides the driver with independent temperature control. Rotate the knob clockwise for warmer  
temperature settings. Rotate the knob counterclockwise for cooler temperature settings. When the  
SYNC feature is active, the driver’s temperature will also manage the passenger’s temperature.  
System Maintenance  
NOTE: The system uses R-1234yf coolant which does not  
pollute the environment in the event of accidental leakage.  
Under no circumstances is the use of R-134a allowed.  
In winter, the climate control system must be turned on at  
least once a month for about ten minutes.  
Have the system inspected at an authorized dealership  
before the summer.  
58 GETTING TO KNOW YOUR VEHICLE  
Climate Control Functions  
Recirculation  
In cold weather, use of Recirculation mode may lead to  
excessive window fogging. The Recirculation feature may  
be unavailable if conditions exist that could create fogging  
on the inside of the windshield.  
A/C (Air Conditioning)  
The Air Conditioning (A/C) button allows the operator to  
manually activate or deactivate the air conditioning sys-  
tem. When the air conditioning system is turned on, cool  
dehumidified air will flow through the outlets into the  
cabin. For improved fuel economy, push the A/C button to  
turn off the air conditioning and manually adjust the  
blower and airflow mode settings. Also, make sure to select  
only Panel, Bi-Level or Floor modes.  
On systems with Manual Climate Controls, if equipped,  
the Recirculation mode is not allowed in Defrost mode to  
improve window clearing operation. Recirculation is dis-  
abled automatically if this mode is selected. Attempting to  
use Recirculation while in this mode causes the LED in the  
control button to blink and then turns off.  
NOTE:  
Automatic Temperature Control (ATC)  
Automatic Operation  
• For Manual Climate Controls, if the system is in Mix,  
Floor or Defrost Mode, the A/C can be turned off, but  
the A/C system shall remain active to prevent fogging of  
the windows.  
1. Push the AUTO button on the faceplate.  
2. Next, adjust the temperature you would like the system to  
maintain by adjusting the temperature control buttons.  
Once the desired temperature is displayed, the system  
achieves and automatically maintains that comfort level.  
• If fog or mist appears on the windshield or side glass,  
select Defrost mode, and increase blower speed if  
needed.  
• If your air conditioning performance seems lower than  
expected, check the front of the A/C condenser (located  
in front of the radiator), for an accumulation of dirt or  
insects. Clean with a gentle water spray from the front of  
the radiator and through the condenser.  
3. When the system is set up for your comfort level, it is  
not necessary to change the settings. You experience the  
greatest efficiency by simply allowing the system to  
function automatically.  
GETTING TO KNOW YOUR VEHICLE 59  
NOTE:  
Operating Tips  
• It is not necessary to move the temperature settings for  
cold or hot vehicles. The system automatically adjusts  
the temperature, mode, and blower speed to provide  
comfort as quickly as possible.  
NOTE: Refer to the chart at the end of this section for  
suggested control settings for various weather conditions.  
Winter Operation  
3
To ensure the best possible heater and defroster perfor-  
mance, make sure the engine cooling system is functioning  
properly and the proper amount, type, and concentration  
of coolant is used. Use of the Air Recirculation mode  
during Winter months is not recommended, because it may  
cause window fogging.  
• The temperature can be displayed in U.S. or Metric units  
by selecting the US/Metric customer-programmable fea-  
ture.  
To provide you with maximum comfort in the Automatic  
mode during cold start-ups, the blower fan remains on low  
until the engine warms up. The blower increases in speed  
and transition into Auto mode.  
Vacation/Storage  
Before you store your vehicle, or keep it out of service (i.e.,  
vacation) for two weeks or more, run the air conditioning  
system at idle for about five minutes, in fresh air with the  
blower setting on high. This will ensure adequate system  
lubrication to minimize the possibility of compressor dam-  
age when the system is started again. If you are leaving  
your vehicle dormant for more than four weeks, disconnect  
the negative cable from the battery. Refer to “Jump Starting  
Procedures” in “In Case Of Emergency” for further infor-  
mation.  
Manual Operation Override  
This system offers a full complement of manual override  
features. The AUTO symbol in the front ATC display will  
be turned off when the system is being used in the manual  
mode.  
NOTE: The system will not automatically sense the pres-  
ence of fog, mist or ice on the windshield. Defrost mode  
must be manually selected to clear the windshield and side  
glass.  
60 GETTING TO KNOW YOUR VEHICLE  
Window Fogging  
Outside Air Intake  
Vehicle windows tend to fog on the inside in mild, rainy,  
and/or humid weather. To clear the windows, select De-  
frost or Mix mode and increase the front blower speed. Do  
not use the Recirculation mode without A/C for long  
periods, as fogging may occur.  
Make sure the air intake, located directly in front of the  
windshield, is free of obstructions, such as leaves. Leaves  
collected in the air intake may reduce airflow, and if they  
enter the plenum, they could plug the water drains. In  
Winter months, make sure the air intake is clear of ice,  
slush, and snow.  
CAUTION!  
Cabin Air Filter  
Failure to follow these cautions can cause damage to  
the heating elements:  
The climate control system filters out dust and pollen from  
the air. Contact an authorized dealer to service your cabin  
air filter, and to have it replaced when needed.  
• Use care when washing the inside of the rear win-  
dow. Do not use abrasive window cleaners on the  
interior surface of the window. Use a soft cloth and a  
mild washing solution, wiping parallel to the heat-  
ing elements. Labels can be peeled off after soaking  
with warm water.  
• Do not use scrapers, sharp instruments, or abrasive  
window cleaners on the interior surface of the win-  
dow.  
• Keep all objects a safe distance from the window.  
GETTING TO KNOW YOUR VEHICLE 61  
Operating Tips Chart  
WINDOWS  
Power Windows  
Power Window Controls  
3
The power window controls are located on the driver’s  
door trim panel. There is a single switch on the front  
passenger door, which operate the front passenger window  
and a single switch on each rear door that operates the rear  
passenger door window. The window controls will operate  
only when the ignition switch is in the ON/RUN position.  
62 GETTING TO KNOW YOUR VEHICLE  
WARNING!  
Never leave children unattended in a vehicle, and do  
not let children play with power windows. Do not  
leave the key fob in or near the vehicle, or in a location  
accessible to children. Occupants, particularly unat-  
tended children, can become entrapped by the win-  
dows while operating the power window switches.  
Such entrapment may result in serious injury or death.  
Auto-Down  
The window switches have an Auto-Down feature. Push  
the window switch for approximately one second, release,  
and the window will go down automatically. To cancel the  
Auto-Down movement, operate the switch in either the up  
or down direction and release the switch. To open the  
window part way, pull the window switch briefly, and  
release the switch when the window is in the desired  
position.  
Power Window Switch Panel  
1 — Driver Side Front Window Switch  
2 — Passenger Side Front Window Switch  
3 — Passenger Side Rear Window Switch  
4 — Driver Side Rear Window Switch  
5 — Window Lockout Switch  
NOTE: The power window switches will remain active for  
up to three minutes after the ignition switch is cycled to the  
OFF position. Opening either front door will cancel this  
feature.  
GETTING TO KNOW YOUR VEHICLE 63  
Auto-Up Feature With Auto-Reverse Protection — If  
Equipped  
Resetting The Auto-Up Feature  
Should the Auto-Up feature stop working, the window  
probably needs to be reset. To reset Auto-Up:  
Pull the window switch for approximately one second,  
release and the window will go up automatically.  
1. Pull the window switch up to close the window com-  
pletely and continue to hold the switch up for an  
additional two seconds after the window is closed.  
3
To stop the window during an Auto-Up operation, push or  
pull again the window switch.  
To close the window part way, pull the window switch  
briefly and release it when you want the window to stop.  
2. Push the window switch down to open the window  
completely and continue to hold the switch down for an  
additional two seconds after the window is fully open.  
NOTE:  
• If the window runs into any obstacle during Auto-  
Closure, it will reverse direction and then go back down.  
Remove the obstacle and use the window switch again  
to close the window.  
Wind Buffeting  
Wind buffeting can be described as the perception of  
pressure on the ears or a helicopter-type sound in the ears.  
Your vehicle may exhibit wind buffeting with the windows  
down, or the sunroof (if equipped) in certain open or  
partially open positions. This is a normal occurrence and  
can be minimized. If the buffeting occurs with the rear  
windows open, open the front and rear windows together  
to minimize the buffeting. If the buffeting occurs with the  
sunroof open, adjust the sunroof opening to minimize the  
buffeting or open any window.  
• Any impact due to rough road conditions may trigger  
the Auto-Reverse function unexpectedly during Auto-  
Closure. If this happens, pull the switch and hold to  
close the window manually.  
WARNING!  
There is no auto-reverse protection when the window  
is almost closed. Be sure to clear all objects from the  
window before closing.  
64 GETTING TO KNOW YOUR VEHICLE  
POWER SUNROOF — IF EQUIPPED  
WARNING!  
The sunroof has two glass panels (the front one is opera-  
tional and the rear one fixed) and is equipped with an  
electrically operated sun blind.  
• Never leave children alone in a vehicle, or with  
access to an unlocked vehicle. Never leave the key  
fob in or near the vehicle or in a location accessible to  
children. Occupants, particularly unattended chil-  
dren, can become entrapped by the power sunroof  
while operating the power sunroof switch. Such  
entrapment may result in serious injury or death.  
• In a collision, there is greater risk of being thrown  
from a vehicle with an open sunroof. You could also  
be seriously injured or killed. Always fasten your  
seat belt properly and make sure all passengers are  
properly secured too.  
The power sunroof and the power sun blind can be operated  
only with the ignition key turned to the MAR position.  
The power sunroof and power sun blind switches are  
located in the overhead console.  
• Do not allow small children to operate the sunroof.  
Never allow your fingers, other body parts, or any  
object to project through the sunroof opening. Injury  
may result.  
Opening  
Push the power sunroof switch for approximately one  
second and the sunroof will stop at the vented position.  
Push the power sunroof switch a second time for approxi-  
mately one second and release, the sunroof will open fully,  
then stop automatically. This is called “Express Open”.  
Power Sunroof Switches  
1 — Power Sun Blind Switch  
2 — Power Sunroof Switch  
GETTING TO KNOW YOUR VEHICLE 65  
To open the sunroof partway, push the power sunroof  
switch briefly and release it when you want the sunroof to  
stop.  
Sunroof Reinitialization  
1. Place the ignition in the ON/RUN mode.  
2. Pull and hold the power sunroof close switch until the  
sunroof is completely closed and you hear an audible  
click.  
NOTE: During Express Open operation, any movement of  
the sunroof switch will stop the sunroof.  
3
Closing  
3. Pull and hold the power sunroof close switch again  
within five seconds. Do not release the switch.  
With the sunroof in the full open position, pull and hold  
the power sunroof switch for approximately one second  
and release. The sunroof will close completely, then stop  
automatically. This is called “Express Close.” To close the  
sunroof partway, pull the power sunroof switch briefly and  
release it when you want the sunroof to stop.  
4. As the power sunroof close switch is held, the sunroof  
panel will open completely and then close again.  
5. Once all sunroof motion has stopped, release the power  
sunroof close switch.  
NOTE: During Express Close operation, any movement of  
NOTE: If the switch is released prior to completion of this  
the sunroof switch will stop the sunroof.  
procedure, the procedure must be repeated.  
Anti-Pinch Protect Feature  
6. Confirm that express operation is functional for open  
and close operations.  
This feature will detect an obstruction in the closing of the  
sunroof during the Express Close operation. If an obstruc-  
tion in the path of the sunroof is detected, the sunroof will  
automatically retract. Remove the obstruction if this oc-  
curs.  
66 GETTING TO KNOW YOUR VEHICLE  
Wind Buffeting  
With the blind fully open pull the power sun blind switch  
and the blind will move towards the front part of the  
vehicle, until it is fully closed.  
Wind buffeting can be described as the perception of  
pressure on the ears or a helicopter-type sound in the ears.  
Your vehicle may exhibit wind buffeting with the windows  
down, or the sunroof (if equipped) in certain open or  
partially open positions. This is a normal occurrence and  
can be minimized. If the buffeting occurs with the rear  
windows open, then open the front and rear windows  
together to minimize the buffeting. If the buffeting occurs  
with the sunroof open, adjust the sunroof opening to  
minimize the buffeting or open any window.  
NOTE: During the automatic opening and closing stages,  
if the power sun blind switch is pulled again it will stop the  
blind movement.  
Closing  
With the sun blind fully open, pull and hold the power sun  
blind switch for approximately one second and release.  
The sun blind will close completely, then stop automati-  
cally. This is called “Express Close.”  
Power Sun Blind  
To close the sun blind partway, pull the sun blind switch  
briefly and release it when you want the sun blind to stop.  
Opening  
Push the sun blind switch for approximately one second  
and the sun blind will open completely, then stop auto-  
matically. This is called “Express Open.”  
To open the sun blind partway, push the sun blind switch  
briefly and release it when you want the sun blind to stop.  
GETTING TO KNOW YOUR VEHICLE 67  
HOOD  
Opening  
To open the hood, two latches must be released to open the  
hood.  
3
1. Pull the hood release lever located under the left side of  
the instrument panel.  
Safety Catch Lever  
Closing  
WARNING!  
Be sure the hood is fully latched before driving your  
vehicle. If the hood is not fully latched, it could open  
when the vehicle is in motion and block your vision.  
Failure to follow this warning could result in serious  
injury or death.  
Hood Release Lever  
2. Move to the outside of the vehicle and push the red  
safety catch lever to the left and raise the hood. The  
safety catch lever is located under the center front edge  
of the hood.  
68 GETTING TO KNOW YOUR VEHICLE  
CAUTION!  
To prevent possible damage, do not slam the hood to  
close it. Lower hood to approximately 12 inches (30 cm)  
and drop the hood to close. Make sure hood is fully  
closed for both latches. Never drive vehicle unless  
hood is fully closed, with both latches engaged.  
LIFTGATE  
Opening  
To unlock the liftgate, use the key fob or activate the central  
locking button located on the instrument panel below the  
radio.  
Liftgate Electronic Release  
WARNING!  
To open the liftgate, push the liftgate electronic release and  
pull the liftgate open with one fluid motion.  
• Driving with the liftgate open can allow poisonous  
exhaust gases into your vehicle. You and your pas-  
sengers could be injured by these fumes. Keep the  
liftgate closed when you are operating the vehicle.  
• If you are required to drive with the liftgate open,  
make sure that all windows are closed, and the  
climate control blower switch is set at high speed. Do  
not use the recirculation mode.  
GETTING TO KNOW YOUR VEHICLE 69  
Gas props support the liftgate in the open position. How-  
ever, because the gas pressure drops with temperature, it  
may be necessary to assist the props when opening the  
liftgate in cold weather.  
3
Liftgate Emergency Release  
As a security measure, a liftgate emergency release is built  
into the liftgate latching mechanism. To access the liftgate  
emergency release, proceed as follows:  
1. Remove the rear headrests and fold down the seats  
completely.  
2. Take the screwdriver from the tool box supplied.  
3. With the screwdriver, remove the yellow tab.  
Liftgate Emergency Release Yellow Tab Location  
70 GETTING TO KNOW YOUR VEHICLE  
4. Press the screwdriver into the seat in order to trigger the  
release trunk tab (follow the direction arrow to open).  
• Position 2 (platform at threshold level) permits a level  
load threshold to facilitate loading/unloading of objects  
in the luggage compartment. It also allows the space  
underneath to be used as a additional compartment for  
stowing objects which are more fragile or small.  
• Position 3 (platform completely raised) in conjunction  
with the lowering of the rear seat and front passenger  
side seat backrests, permits long objects to be loaded. It  
is advisable to use this position only for the actual  
period in which the objects are transported, then return  
the platform to position 1 or 2.  
Tilt Of Cargo Floor  
The cargo floor can also be arranged at an angle (tilted  
toward the rear seat backs), in order to facilitate access to  
the area below the luggage compartment. In this position  
also the plan guarantees the correct locking of any objects  
present inside the cargo area, avoiding that they move in  
the event of sudden braking.  
Liftgate Emergency Release Tab  
Cargo Area Features  
Rear Cargo Storage Features  
This vehicle features a load platform which can be adjusted  
to three different heights, permitting modular luggage  
compartment volume:  
• Position 1 (platform completely lowered) permits maxi-  
mum luggage compartment capacity.  
GETTING TO KNOW YOUR VEHICLE 71  
Access To Double Load Compartment  
To access the double load compartment, proceed as fol-  
lows:  
1. Grip handle and raise platform, holding it with one  
hand.  
3
Tilt Floor Feature  
CAUTION!  
The dimension of the cargo floor permit a maximum  
capacity of a distributed weight of 154 lbs (70kg) (if  
positioned at threshold level) or 88 lbs (40 kg) (if  
positioned at raised level) do not add objects with a  
higher weight.  
Load Platform  
1 — Handle  
2 — Platform  
72 GETTING TO KNOW YOUR VEHICLE  
2. Place the desired objects in compartment.  
Platform Housings  
Load Compartment  
1 — Front Locations  
2 — Rear Locations  
3. Then reposition the platform correctly in the housings  
on the side panels and rear crossmember.  
NOTE: Movements of the load platform must take place in  
a central position relative to the luggage compartment.  
GETTING TO KNOW YOUR VEHICLE 73  
Moving The Load Platform  
2. Position the platform correctly on housing on the side  
panels.  
To move the load platform from lower to upper position,  
proceed as follows:  
1. Grip handle and raise the platform, holding it with one  
hand.  
3
Raised Position  
1 — Front Housing Locations  
2 — Rear Housing Locations  
Load Platform  
1 — Handle  
2 — Platform  
74 GETTING TO KNOW YOUR VEHICLE  
Cargo Area Tie Downs — If Equipped  
There are two tie downs inside the luggage compartment  
for attaching cables which can secure the load carried.  
Two additional tie downs located on the rear crossmember.  
Cargo Side Panel Hook Location  
CAUTION!  
The maximum load admitted per each bag hook is  
22 lbs (10 kg).  
Cargo Tie Down Locations  
Cargo hooks are also available on the side panels to fix  
loads which are not excessively heavy (e.g. bags).  
GETTING TO KNOW YOUR VEHICLE 75  
Storage Compartments  
The HomeLink buttons that are located in the sunvisor  
designate the three different HomeLink channels. The  
There are two storage compartments located on the rear  
side panels.  
HomeLink  
ton.  
indicator is located above the center but-  
3
Storage Compartment  
HomeLink Buttons/Sunvisor  
GARAGE DOOR OPENER — IF EQUIPPED  
NOTE: HomeLink is disabled when the Vehicle Security  
HomeLink replaces up to three remote controls (hand-held  
transmitters) that operate devices such as garage door  
openers, motorized gates, lighting or home security sys-  
tems. The HomeLink unit operates off your vehicles bat-  
tery.  
Alarm is active.  
76 GETTING TO KNOW YOUR VEHICLE  
Before You Begin Programming HomeLink  
Programming A Rolling Code  
Be sure that your vehicle is parked outside of the garage  
before you begin programming.  
For programming garage door openers that were manufac-  
tured after 1995:  
For more efficient programming and accurate transmission  
of the radio-frequency signal, it is recommended that a new  
battery be placed in the hand-held transmitter of the device  
that is being programmed to the HomeLink system.  
These garage door openers can be identified by the “LEARN”  
or “TRAIN” button located where the hanging antenna is  
attached to the garage door opener. It is NOT the button that  
is normally used to open and close the door. The name and  
color of the button may vary by manufacturer.  
To erase the channels, place the ignition in the ON/RUN  
position and push and hold the two outside HomeLink  
buttons (I and III) for up 20 seconds or until the red  
indicator flashes.  
NOTE:  
• Erasing all channels should only be performed when  
programming HomeLink for the first time. Do not erase  
channels when programming additional buttons.  
• If you have any problems, or require assistance, please  
call toll-free 1-800-355-3515 or, on the Internet at  
HomeLink.com for information or assistance.  
Training The Garage Door Opener  
1 — Door Opener  
2 — Training Button  
GETTING TO KNOW YOUR VEHICLE 77  
1. Place the ignition in the ON/RUN position.  
5. At the garage door opener motor (in the garage), locate  
the “LEARN” or “TRAINING” button. This can usually  
be found where the hanging antenna wire is attached to  
the garage door opener/device motor. Firmly push and  
release the “LEARN” or “TRAINING” button. On some  
garage door openers/devices there may be a light that  
blinks when the garage door opener/device is in the  
LEARN/TRAIN mode.  
NOTE: For vehicles equipped with Keyless Enter-N-Go,  
place the ignition in the RUN position with the engine ON.  
Make sure while programming HomeLink with the engine  
ON that your vehicle is outside of your garage, or that the  
garage door remains open at all times.  
3
2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm)  
away from the HomeLink button you wish to program  
while keeping the HomeLink indicator light in view.  
NOTE: You have 30 seconds in which to initiate the next  
step after the LEARN button has been pushed.  
3. Push and hold the HomeLink button you want to  
program while you push and hold the hand-held trans-  
mitter button.  
6. Return to the vehicle and push the programmed  
HomeLink button twice (holding the button for two  
seconds each time). If the garage door opener/device  
activates, programming is complete.  
4. Continue to hold both buttons and observe the indicator  
light. The HomeLink indicator will flash slowly and  
then rapidly after HomeLink has received the frequency  
signal from the hand-held transmitter. Release both  
buttons after the indicator light changes from slow to  
rapid.  
NOTE: If the garage door opener/device does not activate,  
push the button a third time (for two seconds) to complete  
the training.  
To program the remaining two HomeLink buttons, repeat  
each step for each remaining button. DO NOT erase the  
channels.  
78 GETTING TO KNOW YOUR VEHICLE  
Programming A Non-Rolling Code  
5. Push and hold the programmed HomeLink button and  
observe the indicator light.  
For programming Garage Door Openers manufactured  
before 1995:  
• If the indicator light stays on constantly, programming  
is complete and the garage door/device should acti-  
vate when the HomeLink button is pushed.  
1. Place the ignition in the ON/RUN position.  
• To program the two remaining HomeLink buttons,  
repeat each step for each remaining button. DO NOT  
erase the channels.  
NOTE: For vehicles equipped with Keyless Enter-N-Go,  
place the ignition in the RUN position with the engine ON.  
Make sure while programming HomeLink with the engine  
ON that your vehicle is outside of your garage, or that the  
garage door remains open at all times.  
Canadian/Gate Operator Programming  
For programming transmitters in Canada/United States  
that require the transmitter signals to “time-out” after  
several seconds of transmission:  
2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm)  
away from the HomeLink button you wish to program  
while keeping the HomeLink indicator light in view.  
Canadian radio frequency laws require transmitter signals  
to time-out (or quit) after several seconds of transmission,  
which may not be long enough for HomeLink to pick up  
the signal during programming. Similar to this Canadian  
law, some U.S. gate operators are designed to time-out in  
the same manner.  
3. Push and hold the Homelink button you want to  
program while you push and hold the hand-held trans-  
mitter button.  
4. Continue to hold both buttons and observe the indicator  
light. The Homelink indicator will flash slowly and then  
rapidly after HomeLink has received the frequency  
signal from the hand-held transmitter. Release both  
buttons after the indicator light changes from slow to  
rapid.  
It may be helpful to unplug the device during the cycling  
process to prevent possible overheating of the garage door  
or gate motor.  
1. Cycle the ignition to the ON/RUN position.  
GETTING TO KNOW YOUR VEHICLE 79  
NOTE: For vehicles equipped with Keyless Enter-N-Go,  
place the ignition in the RUN position with the engine ON.  
Make sure while programming HomeLink with the engine  
ON that your vehicle is outside of your garage, or that the  
garage door remains open at all times.  
NOTE:  
• If the indicator light stays on constantly, programming  
is complete and the garage door/device should acti-  
vate when the HomeLink button is pushed.  
3
• To program the two remaining HomeLink buttons,  
repeat each step for each remaining button. DO NOT  
erase the channels.  
2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm)  
away from the HomeLink button you wish to program  
while keeping the HomeLink indicator light in view.  
If you unplugged the garage door opener/device for  
programming, plug it back in at this time.  
3. Continue to push and hold the HomeLink button while  
you push and release (“cycle”) your hand-held trans-  
mitter every two seconds until HomeLink has success-  
fully accepted the frequency signal. The indicator light  
will flash slowly and then rapidly when fully trained.  
Using HomeLink  
To operate, switch the ignition to the ON/RUN position  
and the press and release the programmed HomeLink  
button. Activation will now occur for the programmed  
device (i.e., garage door opener, gate operator, security  
system, entry door lock, home/office lighting, etc.,). The  
hand-held transmitter of the device may also be used at  
any time. If the ignition is switched to the OFF position,  
HomeLink will remain active for three minutes. During  
this time, if the vehicle is locked, HomeLink is disabled.  
4. Watch for the HomeLink indicator to change flash rates.  
When it changes, it is programmed. It may take up to 30  
seconds or longer in rare cases. The garage door may  
open and close while you are programming.  
5. Push and hold the programmed HomeLink button and  
observe the indicator light.  
80 GETTING TO KNOW YOUR VEHICLE  
Security  
If you have any problems, or require assistance, please call  
toll-free 1-800-355-3515 or, on the Internet at  
HomeLink.com for information or assistance.  
It is advised to erase all channels before you sell or turn in  
your vehicle.  
To do this, push and hold the two outside buttons for 20  
seconds until the red indicator flashes.  
WARNING!  
• Vehicle exhaust contains carbon monoxide, a danger-  
ous gas. Do not run your vehicle in the garage while  
programming the transceiver. Exhaust gas can cause  
serious injury or death.  
NOTE: All channels will be erased. Individual channels  
cannot be erased.  
The HomeLink Universal Transceiver is disabled when the  
Vehicle Security Alarm is active.  
• Your motorized door or gate will open and close  
while you are programming the universal trans-  
ceiver. Do not program the transceiver if people, pets  
or other objects are in the path of the door or gate.  
Only use this transceiver with a garage door opener  
that has a “stop and reverse” feature as required by  
Federal safety standards. This includes most garage  
door opener models manufactured after 1982. Do not  
use a garage door opener without these safety fea-  
tures. Call toll-free 1-800-355-3515 or, on the Internet  
at HomeLink.com for safety information or assis-  
tance.  
Troubleshooting Tips  
If you are having trouble programming HomeLink, here  
are some of the most common solutions:  
• Replace the battery in the Garage Door Opener hand-  
held transmitter.  
• Push the LEARN button on the Garage Door Opener to  
complete the training for a Rolling Code.  
• Did you unplug the device for programming and re-  
member to plug it back in?  
GETTING TO KNOW YOUR VEHICLE 81  
General Information  
The following regulatory statement applies to all Radio  
Frequency (RF) devices equipped in this vehicle:  
This device complies with Part 15 of the FCC Rules and  
with Innovation, Science and Economic Development  
Canada license-exempt RSS standard(s). Operation is sub-  
ject to the following two conditions:  
3
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, in-  
cluding interference that may cause undesired opera-  
tion.  
Glove Compartment Storage  
NOTE: Changes or modifications not expressly approved  
by the party responsible for compliance could void the  
user’s authority to operate the equipment.  
1 — Upper Glove Compartment  
2 — Lower Glove Compartment  
To open the upper glove compartment, push upward on  
the handle release. The glove compartment door will  
automatically open.  
INTERNAL EQUIPMENT  
Storage  
To open the lower glove compartment, pull the release  
handle.  
Glove Compartment  
The glove compartment is located on the passenger side of  
the instrument panel and features both an upper and lower  
storage area.  
82 GETTING TO KNOW YOUR VEHICLE  
Front Center Armrest Storage — If Equipped  
The front center armrest can also be lifted up and adjusted  
in three positions. To adjust the armrest down, pull up on  
the armrest, then push the latch down.  
The front center armrest contains a storage compartment.  
To open the storage compartment, push in the release latch  
on the front of the armrest.  
Armrest Storage Release Latch  
Front Center Armrest  
Lift upward on the armrest to gain access to the storage  
area.  
GETTING TO KNOW YOUR VEHICLE 83  
Cupholders  
For the driver and front passenger, cupholders are located  
on the floor console between the front seats.  
3
Rear Cupholder  
Power Outlets  
Passenger Compartment Power Outlet  
Front Cupholders  
The power outlet is located on the instrument panel, below  
the climate controls. It only operates with the ignition key  
at MAR/ON.  
For the rear seat passengers, there is one cupholder located  
in the center armrest (if equipped).  
84 GETTING TO KNOW YOUR VEHICLE  
On models with optional Љsmoker’s kit,Љ the cigar lighter  
takes the place of the power socket. Refer to “Cigar  
Lighter” in this section for further information.  
Cigar Lighter — If Equipped  
This is located on the instrument panel, below the climate  
controls. To activate the cigar lighter, push and release the  
knob. After a few seconds the knob automatically returns  
to its initial position, and the cigar lighter is ready for use.  
WARNING!  
When the cigar lighter is in use it becomes very hot. To  
avoid serious injury, handle the cigar lighter with care.  
Always check that the cigar lighter has turned off.  
NOTE:  
• Always check that the cigar lighter is switched off.  
• Do not connect devices with power higher than 180 W to  
the socket. Do not damage the socket by using unsuit-  
able adaptors.  
Passenger Compartment Power Outlet  
NOTE: Do not connect devices with power higher than 180  
W to the socket. Do not damage the socket by using  
unsuitable adaptors.  
GETTING TO KNOW YOUR VEHICLE 85  
ROOF LUGGAGE RACK — IF EQUIPPED  
Distribute cargo weight evenly on the roof rack crossbars.  
The roof rack does not increase the total load carrying  
capacity of the vehicle. Be sure the total load of cargo inside  
the vehicle plus that on the external rack does not exceed  
the maximum vehicle load capacity.  
The crossbars and siderails are designed to carry the  
weight on vehicles equipped with a luggage rack. The load  
must not exceed 110 lbs (50 kg), and should be uniformly  
distributed over the luggage rack crossbars.  
3
Their are two attachment points inside the door jambs that  
the roof rack crossbars attach to.  
WARNING!  
Cargo must be securely tied down before driving your  
vehicle. Improperly secured loads can fly off the ve-  
hicle, particularly at high speeds, resulting in personal  
injury or property damage. Follow the roof rack cau-  
tions when carrying cargo on your roof rack.  
Roof Rack Attachment Points  

Related Topics

Keys
Ignition Switch
Sentry Key
Vehicle Security Alarm
Doors
Seats
Head Restraints
Steering Wheel
Mirrors
Exterior Lights
Interior Lights
Wipers And Washers
Climate Controls
Windows
Power Sunroof ? If Equipped
Hood
Liftgate
Garage Door Opener ? If Equipped
Internal Equipment
Roof Luggage Rack ? If Equipped

Getting To Know Your Instrument Panel

Instrument Cluster
Instrument Cluster Display
Warning Lights And Messages
Onboard Diagnostic System ? OBD II
Emissions Inspection And Maintenance Programs

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

First Generation (2012-2022) Fiat 500 L 4 Door
First Generation (2007-2019) Fiat 500 SUV
First Generation (2014-2024) Fiat 500 X 4 Door
Second Generation (2010-2022) Fiat Doblo Van
First Generation (2000-2009) Fiat Doblo Van
Third Generation (2011-2018) Fiat Punto SUV