Get Getting To Know Your Vehicle -> Mirrors Guide for Fiat 500 L 4 Door First Generation (2012-2022)

38 GETTING TO KNOW YOUR VEHICLE

To unlock the steering column, pull the control handle

down. To tilt the steering column, move the steering wheel

upward or downward as desired. To lengthen or shorten

the steering column, pull the steering wheel outward or

push it inward as desired. To lock the steering column in

position, push the control handle up until fully engaged.

Headlight glare from vehicles behind you can be reduced

by moving the small control under the mirror to the night

position (toward the rear of the vehicle). The mirror should

be adjusted while the small control under the mirror is set

in the day position (toward the windshield).

WARNING!

Do not adjust the steering column while driving.

Adjusting the steering column while driving or driv-

ing with the steering column unlocked, could cause the

driver to lose control of the vehicle. Failure to follow

this warning may result in serious injury or death.

MIRRORS

Inside Day/Night Mirror

Adjusting Rearview Mirror

A single ball joint mirror is provided in the vehicle. It is a

twist on mirror that has a fixed position at the windshield.

The mirror installs on the windshield button with a coun-

terclockwise rotation and requires no tools for mounting.

The mirror head can be adjusted up, down, left, and right

for various drivers. The mirror should be adjusted to center

on the view through the rear window.

Automatic Dimming Mirror — If Equipped

This mirror automatically adjusts for headlight glare from

vehicles behind you. You can turn the feature on or off by

pushing the button at the base of the mirror. A light to the

left of the button will illuminate to indicate when the

dimming feature is activated. The sensor to the right of the

button does not illuminate.

GETTING TO KNOW YOUR VEHICLE 39

NOTE: This feature is disabled when the vehicle is moving

Conversation Mirror — If Equipped

in REVERSE.

There is a conversation mirror located at the top of the

overhead console.

3

Automatic Dimming Mirror

Conversation Mirror Location

CAUTION!

To avoid damage to the mirror during cleaning, never

spray any cleaning solution directly onto the mirror.

Apply the solution onto a clean cloth and wipe the

mirror clean.

40 GETTING TO KNOW YOUR VEHICLE

To access the conversation mirror, pull downward on the

mirror until it reaches the open position.

Power Mirror Controls

Folding Mirrors

Conversation Mirror

The exterior mirrors are hinged to allow the mirror to pivot

forward or rearward to help avoid damage. The mirror has

three detent positions: full forward, normal and full rearward.

Power Mirrors

The power mirror controls are located on the driver’s door

trim panel. To adjust a mirror, turn the control knob toward

the left or right mirror positions indicated. Tilt the control

wand in the direction you want the mirror to move. When

you are finished adjusting the mirror, turn the control to

the center position to prevent accidentally moving a mirror.

Heated Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This

feature will be activated whenever you turn on the

rear window defroster (if equipped). Refer to “Climate

Controls” in “Getting To Know Your Vehicle” for further

information.

GETTING TO KNOW YOUR VEHICLE 41

Illuminated Vanity Mirrors — If Equipped

Sun Visor “Slide-On-Rod” Feature — If Equipped

An illuminated vanity mirror is located on the sun visor. To

use the mirror, rotate the sun visor downward and swing

the mirror cover upward. The light turns on automatically.

Closing the mirror cover turns off the light.

The sun visor “Slide-On-Rod” feature allows for additional

flexibility in positioning the visor to block out the sun.

To use the “Slide-On-Rod” feature, rotate the sun visor

downward and unclip it. Pull the sun visor along the

“Slide-On-Rod” until the sun visor is in the desired posi-

tion.

3

Illuminated Vanity Mirror

“Slide-On-Rod” Feature

42 GETTING TO KNOW YOUR VEHICLE

EXTERIOR LIGHTS

Headlights

The multifunction lever, located on the left side of the

steering wheel, controls the operation of the headlights,

headlight high beams, lane change assist and turn signals.

NOTE: The external lights can only be turned on with the

ignition in the MAR (ACC/ON/RUN) position.

Headlight Operation

NOTE: When the headlights are turned on, the Daytime

Running Lights will be deactivated.

Daytime Running Lights — If Equipped

To activate the Daytime Running Lights (DRL), rotate the

end of the multifunction lever to the O symbol.

NOTE: The low beams and side/tail lights will not be on

with DRL.

Multifunction Lever

The DRL function can be turned on or off through the

touchscreen. Refer to “Uconnect Settings” in “Multimedia”

for further information.

Rotate the end of the multifunction lever upward to the

first detent for headlight operation.

Getting To Know Your Vehicle -> Mirrors for Your Fiat 500 L 4 Door First Generation (2012-2022)

Related Topics

Getting To Know Your Vehicle

Getting To Know Your Instrument Panel

Popular Owner Manuals

Latest Owner Manuals