Advertisement

Advertisement

Getting To Know Your Vehicle -> Keys for Your Fiat 500 L 4 Door First Generation (2012-2022)

16 GETTING TO KNOW YOUR VEHICLE  
KEYS  
NOTE: The authorized dealer that sold you your vehicle  
has the key code numbers for your vehicle locks. These  
numbers can be used to order duplicate keys from your  
authorized dealer.  
Key With Remote Control  
The Remote Keyless Entry (RKE) key fob contains an  
integrated key. To use the mechanical key, simply push the  
mechanical key release button.  
To Unlock The Doors And Liftgate  
Push and release the unlock button on the key fob once to  
unlock the driver’s door or twice, within five seconds, to  
unlock all doors, and the liftgate. The turn signal lights will  
flash to acknowledge the unlock signal. The illuminated  
entry system will also turn on.  
To Lock The Doors And Liftgate  
Push and release the lock button on the key fob to lock all  
doors and the liftgate. The turn signal lights will flash and  
the horn will chirp to acknowledge the signal.  
Locking Doors With A Key  
1. Insert the key with either side up.  
2. Turn the key to the right to lock the door.  
3. Turn the key to the left to unlock the door.  
Integrated Key  
1 — Mechanical Key Release  
Button  
3 — Lock Button  
2 — Unlock Button  
4 — Liftgate Button  
GETTING TO KNOW YOUR VEHICLE 17  
Replacing The Battery In The Key With Remote  
Control  
2. Turn the screw to unlock using a small screwdriver.  
3. Take out the battery case and replace the battery making  
sure that polarities are correct.  
4. Refit the battery case inside the key and lock it turning  
the screw to lock.  
3
NOTE: Used batteries should be properly disposed of as  
specified by law, see an authorized dealer for assistance  
needed.  
Programming Additional Key Fobs  
Refer to “Sentry Key” in “Getting To Know Your Vehicle”  
for further information.  
If you do not have a programmed key fob, contact an  
authorized dealer for details.  
Key Fob Components  
Request For Additional Remote Controls  
1 — Mechanical Key  
2 — Mechanical Key Release Button  
3 — Battery  
4 — Battery Case  
5 — Screw  
The system can recognize up to eight remote controls.  
Should a new remote control be necessary, go to an  
authorized dealer, taking an ID document and the car  
ownership documents.  
To replace the battery, proceed as follows:  
1. Push mechanical release button to open the mechanical  
key.  
18 GETTING TO KNOW YOUR VEHICLE  
General Information  
IGNITION SWITCH  
Ignition Switch  
The following regulatory statement applies to all radio  
frequency (RF) devices equipped in this vehicle:  
The ignition switch can be turned to three different posi-  
tions:  
This device complies with Part 15 of the FCC Rules and  
with Industry Canada license-exempt RSS standard(s).  
Operation is subject to the following two conditions:  
STOP: engine off, key can be removed. Some electrical  
devices (e.g. sound system, central door locking system,  
etc.) can operate.  
1. This device may not cause harmful interference, and  
NOTE: The transmission must be shifted into PARK before  
the key is turned to the OFF position. Then, the key can be  
removed.  
2. This device must accept any interference received, in-  
cluding interference that may cause undesired opera-  
tion.  
AVV: engine start-up.  
NOTE: Changes or modifications not expressly approved  
by the party responsible for compliance could void the  
user’s authority to operate the equipment.  
MAR: driving position. All electrical devices are en-  
abled.  
If the key is turned to the OFF/LOCK position before  
shifting into park, the key will have to be moved to the  
driving (MAR) position and back to OFF/LOCK. Then, the  
key can be removed.