GETTING TO KNOW YOUR INSTRUMENT PANEL 109
— Speed Warning Indicator Light — If Equipped
ONBOARD DIAGNOSTIC SYSTEM — OBD II
When Set Speed Warning is turned on, the speed warning
telltale will illuminate in the instrument cluster with a
number matching the set speed. When the set speed is
exceeded, the indication will light up yellow and flash
along with a continuous chime (up to ten seconds or until
the speed is no longer exceeded). Speed Warning can be
turned on and off in the instrument cluster display, for
further information refer to “Instrument Cluster Display
Menu Items” in “Getting To Know Your Instrument Panel.”
Your vehicle is equipped with a sophisticated Onboard Diag-
nostic system called OBD II. This system monitors the perfor-
mance of the emissions, engine, and transmission control sys-
tems. When these systems are operating properly, your vehicle
will provide excellent performance and fuel economy, as well as
engine emissions well within current government regulations.
4
If any of these systems require service, the OBD II system
will turn on the Malfunction Indicator Light (MIL). It will
also store diagnostic codes and other information to assist
your service technician in making repairs. Although your
vehicle will usually be drivable and not need towing, see
an authorized dealer for service as soon as possible.
The number “55” is only an example of a speed that can be
set.
Blue Indicator Lights
CAUTION!
— High Beam Indicator Light
This indicator light will illuminate to indicate that the high
beam headlights are on. With the low beams activated,
push the multifunction lever forward (toward the front of
the vehicle) to turn on the high beams. Pull the multifunc-
tion lever rearward (toward the rear of the vehicle) to turn
off the high beams. If the high beams are off, pull the lever
toward you for a temporary high beam on, Љflash to passЉ
scenario.
• Prolonged driving with the MIL on could cause
further damage to the emission control system. It
could also affect fuel economy and driveability. The
vehicle must be serviced before any emissions tests
can be performed.
• If the MIL is flashing while the vehicle is running,
severe catalytic converter damage and power loss
will soon occur. Immediate service is required.
English 