Get DASHBOARD AND CONTROLS -> Digital Display Guide for Fiat Fiorino SUV Second Generation (1988-2014)

DIGITAL DISPLAY

STANDARD SCREEN fig. 12

The standard screen shows the following

information:

A Headlight aiming position (only with

dipped beam headlights on).

B Odometer (covered km or miles).

fig. 12

fig. 13

C Clock (always displayed, even with ig-

nition key removed and front doors

closed).

CONTROL BUTTONS fig. 13

Light adjustment inside vehicle

– with standard screen enabled, it is pos-

sible to adjust the brightness of the in-

strument panel and sound system.

+ To scroll the displayed menu and the

related options upwards or to in-

crease the value displayed.

Note With key removed (when opening

one of the front doors) the display turns

on and shows the time and km or miles

covered for a few seconds.

MENU Press briefly to display

the menu and/or to go to next Setup menu

screen or to confirm the re-

quired menu option.

ESC

– to scroll the menu options upwards and

downwards;

– to increase or decrease values during set-

tings.

Hold pressed to go back to the

standard screen.

– To scroll the displayed menu and the

related options downwards or to de-

crease the displayed value.

Note Buttons + and – activate different

functions according to the following situ-

ations:

16

SETUP MENU fig. 14

Selecting a menu option

Prolonged pressing of MENU ESC button

The menu comprises a series of functions

arranged in a cycle which can be selected

through buttons + and –, thus gaining ac-

cess to the different select and setting (set-

up) operations given in the following para-

graphs.

– to quit the setup menu if you are in the

menu;

– briefly press button MENU ESC to se-

lect the menu option to set;

– to quit the displayed menu if you are set-

ting an option;

– press buttons + and – (by single press-

es) to select the new setting;

– to save the changes to stored settings (and

confirmed by pressing button MENU

ESC).

– briefly press button MENU ESC to

store the new setting and go back to the

previously selected menu option.

The setup menu can be activated by briefly

pressing button MENU ESC.

The setup menu environment is timed;

when quitting the menu due to timing ex-

piry, only the settings stored by the user

are saved (and confirmed by briefly press-

ing button MENU ESC).

Single presses on buttons + and – will

Selecting “Set Clock”

scroll the setup menu options.

– briefly press button MENU ESC to se-

lect the first value to change (hours);

Handling modes differ with each other ac-

cording to the characteristic of the option

selected.

– press buttons + and – (by single press-

es) to select the new setting;

– briefly press button MENU ESC to

store the new setting and go to the next

setup menu option (minutes);

– after setting the values with the same

procedure, go back to the menu item pre-

viously selected.

17

Briefly press button MENU ESC to start browsing

from the standard screen. Press + or – to browse with-

in the menu.

Note. Only the short menu can be accessed while the

vehicle is moving for reasons of safety (“SPEED” set-

ting). Stop the vehicle to access the full menu.

fig. 14

18

Setting the speed limit (SPEEd)

To cancel the setting, proceed as follows: Adjusting the buzzer volume

(bUZZ)

This function is used to set the vehicle – briefly press button MENU ESC: (On)

speed limit (km/h or mph); when this lim- will flash on the display;

This function is used to adjust the volume

of the buzzer triggering in the event of fail-

ure/warning indications and when MENU

ESC, + and – buttons are pressed.

it is exceeded the driver is immediately

– press button –: (Off) will flash on the dis-

alerted (see section “Warning lights and

play;

messages”).

– briefly press button MENU ESC to go

To set the speed limit, proceed as follows:

To adjust the desired volume proceed as

follows:

back to the menu screen or press the but-

– briefly press button MENU ESC, the ton for long to go back to the standard

message (SPEEd) and the previously set screen without storing settings.

unit (km/h) or (mph) will appear on the

– briefly press button MENU ESC, the

display will show the wording (bUZZ);

display;

Setting the clock (Hour)

– press button + or – to select the re-

quired volume (volume can be adjusted ac-

cording to 8 levels).

– press button + or – to select speed lim-

it activation (On) or deactivation (OFF);

With this function it is possible to set the

clock.

– if the function has been activated (On),

press buttons + or – to select the re-

quired speed limit and then press MENU

ESC to confirm;

– briefly press button MENU ESC to go

back to the menu screen or press the but-

ton for long to go back to the standard

screen without storing settings.

To set the required unit proceed as fol-

lows:

– briefly press button MENU ESC,

“hours” will flash on the display;

Note The speed may be set in the range

from 30 to 200 km/h, or from 20 to 125

mph according to the previously chosen

unit (see “Setting the distance unit”) de-

scribed below. The setting will in-

crease/decrease by five units each time

button +/– is pressed. Hold button +/–

pressed to increase/decrease the setting

rapidly. When close to the desired value,

press the button as many times as re-

quired to complete the regulation.

– press button + or – for setting;

– briefly press button MENU ESC: the

“minutes” start flashing on the display;

– press the button + or – to set the de-

sired value;

– briefly press button MENU ESC to go

back to the menu screen or press the but-

ton for long to go back to the standard

screen without storing settings.

– Briefly press button MENU ESC to go

back to the menu screen or press the but-

ton for long to go back to the standard

screen without storing settings.

19

Setting the unit (Unit)

Front passenger’s airbag

and side bag

activation/deactivation

(where provided) (BAG P)

With this function it is possible to set the

unit.

To set the required unit proceed as fol-

lows:

This function is used to activate/deactivate

the air bag on the passenger’s side.

MENU ESC

+ +

– briefly press button MENU ESC, the

display will show the wording (Unit) and

the previously set unit (km) or (mi);

Proceed as follows:

–

❒

press button MENU ESC and, after

viewing the message (BAG P OFF) (to

deactivate) or (BAG P On) (to activate)

by pressing buttons + or –, press the

button MENU ESC again;

– press button + or – to select the re-

quired distance unit.

– briefly press button MENU ESC to go

back to the menu screen or press the but-

ton for long to go back to the standard

screen without storing settings.

❒

the confirmation request message will

be displayed;

MENU ESC

+ +

press buttons + or – to select (YES)

(confirming activation/deactivation) or

(no) (to abort);

–

❒

briefly press the button MENU ESC

to view a message confirming your se-

lection and go back to the menu screen.

Alternatively, press the button for a

prolonged time and go back to the stan-

dard screen without storing the set-

tings.

MENU ESC

20

DASHBOARD AND CONTROLS -> Digital Display for Your Fiat Fiorino SUV Second Generation (1988-2014)

Related Topics

Popular Owner Manuals

Latest Owner Manuals