1988-2014 Fiat Fiorino SUV DASHBOARD AND CONTROLS -> Manual Climate Control System User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

DASHBOARD AND CONTROLS -> Manual Climate Control System for Your Fiat Fiorino SUV Second Generation (1988-2014)

MANUAL CLIMATE CONTROL SYSTEM (where provided)  
CLIMATE COMFORT  
The knob D enables the air in the vehicle  
to reach all the areas in the passenger  
compartment according to 5 distribution  
levels:  
supply of air from central vents and side  
outlets;  
feet heating and face refreshing (bilevel  
ß function);  
quicker heating of passenger com-  
partment;  
©
warming of passenger compartment  
and windscreen demisting at the same  
time;  
®
-
demisting and defrosting of wind-  
screen and front side windows.  
HEATING  
Proceed as follows:  
turn knob A all the way to the right  
(line on -);  
fig. 38  
turn knob C to the required speed;  
turn knob D on:  
CONTROLS fig. 38  
A: air temperature adjustment knob (for C: fan and climate control system activa-  
to warm the feet and at the same time  
demist the windscreen;  
®
hot/cold air mixing);  
tion/deactivation knob;  
B: internal air recirculation on/off button; D: air distribution knob.  
to deliver air to the feet area and re-  
ß lease cooler air from central vents  
and outlets on the dashboard;  
to heat the area quickly.  
©
44  
FAST HEATING  
Window demisting  
ACTIVATION OF  
INTERNAL AIR  
RECIRCULATION  
Proceed as follows:  
In the event of considerable external mois-  
ture and/or rain and/or considerable dif-  
ferences in temperature inside and out-  
side the passenger compartment, perform  
the following preventive demisting proce-  
dure:  
close all the vents on the dashboard;  
Turn cursor B to position  
v.  
turn knob A on  
-
;
-
.
It is advisable to activate air recirculation  
during vehicle stops in queues or tunnels  
to prevent the introduction of polluted air  
from the outside.  
turn knob C on 4  
turn knob D on  
;
ß
turn cursor B on  
;
turn knob A on  
-
;
Do not use the function for a long time,  
particularly if there are many passengers  
on board, to prevent the windows from  
misting up.  
FAST DEMISTING/  
DEFROSTING OF WINDSCREEN  
AND FRONT SIDE WINDOWS  
(MAX-DEF function)  
turn knob C on 2;  
turn knob D on  
-
having the possi-  
if the win-  
bility to reach position  
dows are not misty.  
®
IMPORTANT The internal air recircula-  
tion system makes it possible to reach the  
required “heating” or “cooling” condi-  
tions faster. Do not use the air recircula-  
tion function on rainy/cold days as it would  
considerably increase the possibility of the  
windows misting inside.  
Proceed as follows:  
turn knob A on  
-
;
REGULATING THE FAN SPEED  
turn knob C on 4  
turn knob D on  
turn cursor B on  
-
;
To ventilate the passenger compartment  
properly proceed as follows:  
-
;
.
fully open the central air vents and side  
outlets;  
After demisting/defrosting, operate the  
standard controls to restore the required  
comfort conditions.  
turn knob A to the blue section;  
turn cursor B on  
turn knob C to the required speed;  
turn knob D on  
;
IMPORTANT The climate control system  
is very useful for faster demisting because  
it dries the air. Regulate the controls as  
described above and engage the climate  
control by pressing knob C.  
.
©
45  
CLIMATE CONTROL (cooling)  
Proceed as follows:  
SERVICING THE SYSTEM  
Let the climate control system run for at  
least 10 minutes every month during the  
winter. Have the system inspected at a Fi-  
at Dealership before the summer.  
turn knob A to the blue section;  
turn knob C on 4  
turn cursor B on  
turn knob D on  
-
;
v
;
;
©
turn knob C.  
fig. 39  
Regulating cooling  
DEMISTING/DEFROSTING  
OF REAR HEATED WINDOW  
AND DOOR MIRRORS  
Proceed as follows:  
turn cursor B on  
;
(where provided) fig. 39  
turn knob A to the right to increase the  
temperature;  
Press button ( to engage this function.  
When the function is active, a led on the  
button goes on.  
turn knob C to the left to reduce the  
fan speed.  
To disable this function, press the button  
( again.  
IMPORTANT Do not apply stickers on  
the inside of the rear window over the  
heating filaments to avoid damage that  
might cause it to stop working properly.  
46  

Related Topics

Popular Owner Manuals