“Smart washing” function
REAR WINDOW WIPER/
WASHER (where provided)
Deactivation
Pull the stalk towards the steering wheel
(unstable position) to operate the wind-
screen washer jet.
Operation will stop when releasing the
stalk.
The device can work only when the igni-
tion key is on MAR.
Keeping the stalk pulled for more than half
a second, with just one movement it is
possible to operate the washer jet and the
wiper at the same time.
Activation
Turn the knurled ring to to operate the
rear window wiper as follows:
Do not use the rear window
wiper to remove layers of
'
snow or ice from the rear win-
❒ intermittent operation if the wind-
screen wiper is off;
The wiper stops working three strokes af-
ter releasing the stalk.
dow. In such conditions, the
windscreen wiper may be subjected to
excessive stress and the motor protec-
tion which prevents operation for a few
seconds may trip. If rear window wiper
operation is not reset, contact the
Fiat Dealership.
❒ synchronised with the windscreen
wiper (but with half stroke frequency);
A further stroke after approx. 6 seconds
completes the wiping cycle.
❒ continuous operation with reverse gear
engaged and windscreen wiper on.
With windscreen wiper on and reverse
gear engaged, rear window wiping will be
continuous.
Pushing the stalk towards the dashboard
(unstable position) will activate the rear
window washer. Keeping the stalk pushed
for over half a second will also activate the
rear window wiper. Releasing the stalk will
activate the smart washing function as de-
scribed for the windscreen wiper.
50
English 
