Values displayed
Trip distance
Trip time
Range
Indicates the distance covered from the Indicates the time elapsed since the start
start of a new mission.
of a new mission.
Indicates the travel distance left before the
vehicle runs out of the fuel in the tank. Average consumption
IMPORTANT If information is not avail-
able, the message “----” will appear instead
of the Trip Computer values. Counting of
the different values will be resumed reg-
ularly when normal operation is restored.
This will not cause any resetting of the val-
ues displayed before the failure nor start-
ing a new mission.
The message “----” will appear on the dis-
Represents the approximate average con-
play in the following cases:
sumption from the start of a new mission.
– value lower than 50 km (or 30 mi)
Instant consumption
– vehicle left parked with engine running
for long.
Indicates the fuel consumption. The val-
ue is constantly updated. The message
IMPORTANT Changes of the range value “----” will appear on the display if the ve-
can be affected by many factors: driving hicle is parked with the engine running.
style (see paragraph “Driving style” in sec-
tion “Starting and driving”), type of route
Average speed
(motorway, urban cycle, mountain roads,
etc…), conditions of use of the vehicle
(load, tyre pressure, etc…). Trip planning
must take into account the above notes.
Represents the vehicle average speed as a
function of the overall time elapsed since
the start of a new mission.
31
English 
