“FOLLOW ME HOME”
DEVICE
DIRECTION INDICATORS
fig. 41
This device allows the illumination of the
space in front of the vehicle for a preset
time.
Push the stalk to (stable) position:
❒ up (position 1): right-hand indicator
ON;
Activation
❒ down (position 2): left-hand indicator
ON.
With the ignition key on STOP or re-
moved, pull the stalk towards the steering
wheel within 2 minutes from when the en-
gine is turned off.
Warning light or will blink on the in-
Î
¥
fig. 41
strument panel.
Direction indicators are switched off au-
tomatically when the steering wheel of the
vehicle is straightened.
Lane change function
At each single movement of the stalk, the
lights stay on for further 30 seconds up to
a maximum of 210 seconds; then the lights
are switched off automatically.
If you want to signal that you are changing
lane, bring the left stalk in unstable posi-
tion for shorter than half a second.
If you want the indicator to flash briefly to
show that you are about to change lane,
which requires minimum steering wheel
rotation, move the stalk up or down with-
out clicking into position (unstable posi-
tion). When released, the stalk will return
to its home position.
Warning light 3 on the instrument pan-
el lights up, and the corresponding mes-
sage appears on the display (see “Warn-
ing lights and messages”), whenever the
stalk is moved. The warning light goes out
when the stalk is operated and stays on
until the device is automatically deactivat-
ed. The time during which the lights stay
on can only be increased by operating the
stalk.
The direction indicator on the selected
side flashes three times and then switch-
es off automatically.
Deactivation
Keep the stalk pulled towards the steer-
ing wheel for more than 2 seconds.
48
English 
