REGULATING THE
FAN SPEED
ACTIVATION OF INTERNAL
AIR RECIRCULATION
To ventilate the passenger compartment Turn cursor B to position
v.
properly proceed as follows:
It is advisable to activate air recirculation
❒ fully open the central air vents and side during vehicle stops in queues or tunnels
outlets;
to prevent the introduction of polluted air
from the outside.
❒ turn knob A to the blue section;
Do not use the function for a long time,
particularly if there are many passengers
on board, to prevent the windows from
misting up.
❒ turn cursor B on
❒ turn knob C to the required speed;
❒ turn knob D on
¶
;
fig. 37
DEMISTING/DEFROSTING OF REAR
HEATED WINDOW AND DOOR
MIRRORS (where provided) fig. 37
¥.
IMPORTANT The internal air recircula-
tion system makes it possible to reach the
required “heating” or “cooling” conditions
faster. Do not use the air recirculation
function on rainy/cold days as it would
considerably increase the possibility of the
windows misting inside.
Press button ( to engage this function.
When the function is active, a led on the
button goes on.
To disable this function, press the button
( again.
IMPORTANT Do not apply stickers on
the inside of the rear window over the
heating filaments to avoid damage that
might cause it to stop working properly.
43
English 
