Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Driving -> 6-speed manual gearbox for Your Fiat Scudo Van Third Generation (2022-2025)

Driving  
Do not leave the vehicle while it is being  
held temporarily by hill start assist.  
If someone needs to get out of the vehicle  
with the engine running, apply the parking  
brake manually. Then check that the parking  
brake indicator lamp and the P indicator lamp  
in the electric parking brake control are on  
fixed.  
Facing uphill, with the vehicle stationary,  
the vehicle is held for a short time when the  
driver releases the brake pedal:  
– If first gear or neutral is engaged on a manual  
gearbox.  
– If mode D or M is selected on an automatic  
gearbox.  
– If mode D or B is selected on the drive  
selector.  
6-speed manual gearbox  
6
Engaging 5th or 6th gear  
► Move the gear selector fully to the right to  
engage 5th or 6th gear.  
Failure to follow this instruction could  
cause permanent damage to the gearbox  
(inadvertent engagement of 3rd or 4th gear).  
The hill start assist function cannot be  
deactivated. However, using the parking  
brake to immobilise the vehicle interrupts its  
operation.  
Engaging reverse gear  
If your vehicle has an automatic gearbox  
and you have to move off on a steep  
slope (uphill or downhill) with a loaded  
vehicle, press the brake pedal, select  
position D, release the parking brake then  
release the brake pedal.  
Facing downhill, with the vehicle stationary  
and reverse gear engaged, the vehicle is held  
for a short time when the driver releases the  
brake pedal.  
Malfunction  
Operation  
If the event of a malfunction, these  
warning lamps light up on the  
► Raise the ring under the knob and move the  
gear lever to the left, then forwards.  
instrument panel, accompanied by the display of  
a message.  
Have it checked by a Fiat Dealership or a  
qualified workshop.  
Only engage reverse gear when the  
vehicle is stationary with the engine at  
idle.  
As a safety precaution and to facilitate  
engine starting:  
– always select neutral,  
141