Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Driving -> Head-up display for Your Fiat Scudo Van Third Generation (2022-2025)

Driving  
If this is not the case, when the vehicle is  
stationary, set the display to the required  
units of speed so that it complies with what is  
authorised locally.  
In the event of a windscreen replacement,  
contact a Fiat Dealership or a qualified  
workshop to recalibrate the camera;  
otherwise, the operation of the associated  
driving aids may be disrupted.  
always detected by the system: distance  
measurements may be distorted.  
6
The sensors do not systematically detect  
obstacles that are too low (pavements, studs)  
or too thin (trees, posts, wire fences).  
Certain obstacles located in the sensors’ blind  
spots may not be detected or may no longer  
be detected during the manoeuvre.  
In case of doubt, contact a Fiat Dealership or  
a qualified workshop.  
Other cameras  
The images from the camera(s)  
displayed on the touch screen or on the  
instrument panel may be distorted by the  
terrain.  
In the presence of areas in shade, or in  
conditions of bright sunlight or inadequate  
lighting, the image may be darkened and with  
lower contrast.  
Certain materials (fabrics) absorb sound  
waves: pedestrians may not be detected.  
Head-up display  
System which projects various information onto a  
smoked blade placed in the driver's field of vision  
to avoid the driver having to take their eyes off  
the road.  
Maintenance  
Clean the bumpers and door mirrors and  
the field of vision of the cameras regularly.  
When washing your vehicle at high pressure,  
direct the spray from at least 30 cm away  
from the radar, sensors and cameras.  
Display in operation  
Obstacles may appear further away than they  
actually are.  
Sensors  
Mats/Pedal trims  
The operation of the sensors, as well as  
any associated functions, may be disrupted  
by noise pollution such as that emitted by  
noisy vehicles and machinery (e.g. lorries,  
pneumatic drills), by the accumulation of  
snow or dead leaves on the road or in the  
event of damaged bumpers and mirrors.  
When reverse gear is engaged, an audible  
signal (long beep) indicates that the sensors  
may be dirty.  
The use of mats or pedal trims not  
approved by Fiat may interfere with the  
operation of the speed limiter or cruise  
control.  
To avoid any risk of jamming the pedals:  
– Ensure that the mat is secured correctly.  
– Never fit one mat on top of another.  
Once the system has been activated, the  
following information is grouped together in the  
head-up display:  
Units of speed  
Ensure that the units of speed displayed  
on the instrument panel (mph or km/h) are  
those for the country you are driving in.  
A front or rear impact to the vehicle can  
upset the sensors’ settings, which is not  
A. The speed of the vehicle.  
B. Cruise control/speed limiter information.  
151