Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Driving -> Manual parking brake for Your Fiat Scudo Van Third Generation (2022-2025)

Driving  
With an electric motor, this mode remains  
active for about 10 minutes after the  
vehicle is locked.  
With a manual gearbox, engage a gear  
and then switch off the ignition.  
Indicator lamp  
This indicator lamp comes on both on the  
instrument panel and on the control to  
confirm that the parking brake has been applied,  
accompanied by display of the message  
"Parking brake applied".  
The indicator lamp goes out to confirm the  
release of the parking brake, accompanied by  
the display of the message "Parking brake  
released".  
With an automatic gearbox, place the  
gear selector in position P, then switch  
off the ignition.  
Manual parking brake  
Application  
► With your foot on the brake pedal, pull  
the parking brake lever up to immobilise your  
vehicle.  
Electric parking brake  
In automatic mode, this system applies the  
parking brake when the engine is switched off  
and releases it when the vehicle moves off.  
The indicator lamp flashes in response to a  
manual request to apply or release the brake.  
Release on level ground  
► With your foot on the brake pedal, pull the  
parking brake lever up gently, press the release  
button, then lower the lever fully.  
When the vehicle is being driven, this  
warning lamp coming on, accompanied  
by an audible signal and a message, indicates  
that the parking brake is still applied or has not  
been fully released.  
In the event of a battery failure, the  
electric parking brake will not operate.  
As a safety measure, with a manual gearbox,  
if the parking brake is not applied, immobilise  
the vehicle by engaging a gear.  
As a safety measure, with an automatic  
gearbox or drive selector, if the parking brake  
is not applied, immobilise the vehicle by  
placing the supplied chock against one of the  
wheels.  
At any time, with the engine running:  
To apply the parking brake, briefly pull the  
control.  
To release it, briefly push the control while  
pressing the brake pedal.  
When parking on a slope or on a steep  
slope with a loaded vehicle, turn the  
wheels against the kerb then apply the  
parking brake.  
Contact a Fiat Dealership or a qualified  
workshop.  
Automatic mode is activated by default.  
This automatic operation can be deactivated in  
certain situations.  
Pressing the brake pedal facilitates the  
application and release of the manual  
parking brake.  
138