Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Driving -> Parking sensors for Your Fiat Scudo Van Third Generation (2022-2025)

Driving  
– with vehicles moving in the opposite direction,  
– driving on a winding road or sharp bends,  
– when overtaking or being overtaken by a very  
long vehicle (lorry, bus, etc.) which is both in the  
rear blind spot and present in the driver’s front  
field of vision,  
The system is automatically deactivated  
when towing with a towing device  
approved by Fiat.  
6
Malfunction  
Depending on the vehicle’s equipment:  
– when overtaking quickly,  
– in very heavy traffic: vehicles detected in  
front and behind are confused with a lorry or a  
stationary object.  
In the event of a fault, this or these warning  
lamp(s) flash(es).  
Activation/Deactivation  
or  
The warning lamp in this button flashes  
and a message appears, accompanied by  
an audible signal.  
With audio system  
Contact a Fiat Dealership or a qualified  
workshop.  
Parking sensors  
For more information, refer to the  
General recommendations on the use  
of driving and manoeuvring aids.  
To activate or deactivate the system, press  
this button.  
The indicator lamp is on when the system is  
activated.  
With touch screen  
The settings are changed via the vehicle  
configuration menu.  
No alert will be given in the following situations:  
– in the presence of non-moving objects (parked  
vehicles, safety barriers, street lamps, road  
signs, etc.),  
169  
Driving  
This system detects and signals the proximity of  
obstacles (e.g. pedestrian, vehicle, tree, barrier)  
using sensors located in the bumper.  
Visual assistance  
The sound emitted by the speaker (front  
or rear) locates the obstacle relative to  
the vehicle, in front or behind it.  
Rear parking sensors  
Deactivation/Activation  
With dashboard button  
► Engage reverse gear to start the system  
(confirmed by an audible signal).  
The system is switched off when reverse gear is  
disengaged.  
Audible assistance  
This supplements the audible signal by  
displaying bars on the screen that move  
progressively nearer to the vehicle (green: more  
distant obstacles; yellow: close obstacles; red:  
very close obstacles).  
To deactivate or activate the system, press  
this button.  
The indicator lamp is on when the system is  
deactivated.  
The function signals the presence of obstacles  
present within the sensors’ detection zone.  
The proximity information is given by an  
intermittent audible signal, the frequency of  
which increases as the vehicle approaches the  
obstacle.  
When the distance between the vehicle and  
the obstacle becomes less than about thirty  
centimetres, the audible signal becomes  
continuous.  
When the obstacle is very close, the "Danger"  
symbol is displayed on the screen.  
Without dashboard button  
The settings are changed via the  
vehicle configuration menu.  
Front parking sensors  
Supplementing the rear parking sensors, the  
front parking sensors are triggered when an  
obstacle is detected in front and the speed of the  
vehicle is below 6 mph (10 km/h).  
The rear parking sensors system will be  
deactivated automatically if a trailer or  
bicycle carrier is connected to a towing device  
installed in accordance with the  
Front parking sensor operation is suspended if  
the vehicle stops for more than three seconds in  
forward gear, if an obstacle is no longer detected  
or the vehicle speed exceeds 6 mph (10 km/h).  
manufacturer's recommendations.  
The sound emitted by the speaker (right or left)  
allows you to identify the side on which the  
obstacle is located.  
170  
Driving  
Operating limits  
Principle of operation  
6
If the boot is heavily loaded, the vehicle may tilt,  
affecting distance measurements.  
Malfunction  
In the event of a malfunction when  
changing into reverse gear, this warning  
lamp lights up on the instrument panel,  
accompanied by the display of a message and  
an audible signal (short beep).  
Using the rear camera, the vehicle's close  
surroundings are recorded during manoeuvres  
at low speed.  
Have it checked by a Fiat Dealership or a  
qualified workshop.  
For more information, refer to the  
General recommendations on the use  
of driving and manoeuvring aids.  
An image from above your vehicle in its close  
surroundings is reconstructed (represented  
between the brackets) in real time and as the  
manoeuvre progresses.  
It facilitates the alignment of your vehicle when  
parking and allows obstacles close to the vehicle  
to be seen. It is automatically deleted if the  
vehicle remains stationary for too long.  
The screen is divided into two parts with a  
contextual view and a view from above the  
vehicle in its close surroundings.  
The parking sensors supplement the information  
on the view from above the vehicle.  
Various contextual views may be displayed:  
– Standard view.  
– 180° view.  
– Zoom view.  
The display disappears above  
approximately 6 mph (10 km/h).  
The system is automatically deactivated  
about 7 seconds after coming out of reverse  
or on opening a door or the boot.  
AUTO mode is activated by default.  
In this mode, the system chooses the best view  
to display (standard or zoom).  
You can change the type of view at any time  
during a manoeuvre.  
As soon as reverse gear is engaged with the  
engine running, this system displays views of  
your vehicle’s close surroundings on the touch  
screen using a camera located at the rear of the  
vehicle.  
The system status is not saved when the ignition  
is switched off.  
Activation  
Activation is automatic on engaging reverse gear  
at a speed lower than 6 mph (10 km/h).  
171  
Driving  
The blue lines 1 represent the width of your  
vehicle, with the mirrors unfolded; their direction  
changes according to the position of the steering  
wheel.  
AUTO mode  
The red line 2 represents a distance of 30 cm  
from the rear bumper; the two blue lines 3 and 4  
represent 1 m and 2 m, respectively.  
This view is available with AUTO mode or in the  
view selection menu.  
You can choose the display mode at any time by  
pressing this area.  
Zoom view  
When the sub-menu is displayed, select one of  
the four views:  
This mode is activated by default.  
Using sensors in the rear bumper, the automatic  
view changes from the rear view (standard) to  
the view from above (zoom) as an obstacle is  
approached at the level of the red line (less than  
30 cm) during a manoeuvre.  
"Standard view".  
"180° view".  
"Zoom view".  
"AUTO mode".  
Standard view  
The function will be deactivated:  
– If a trailer is attached or a bicycle  
carrier is fitted on a towing device (vehicle  
fitted with a towing device installed in line with  
the manufacturer's recommendations).  
– Above about 6 mph (10 km/h).  
The camera records the vehicle's surroundings  
during the manoeuvre in order to create a  
view from above the rear of the vehicle in its  
near surroundings, allowing the vehicle to be  
manoeuvred around nearby obstacles.  
This view is available with AUTO mode or in the  
view selection menu.  
– When the boot is opened.  
– Upon changing out of reverse gear (the  
image remains displayed for 7 seconds).  
– By pressing the white arrow in the upper-  
left corner of the touch screen.  
The area behind the vehicle is displayed on the  
screen.  
172  
Driving  
Obstacles may appear further away than  
they actually are.  
It is important to monitor the sides of the  
vehicle during the manoeuvre, using the  
mirrors.  
This view is only available via the view selection  
menu.  
6
Quick start mode  
Parking sensors also provide additional  
information about the area around the vehicle.  
180° view  
This mode displays, as quickly as possible, the  
contextual view (left-hand part) and the overhead  
view of the vehicle.  
A message is displayed advising you to check  
your vehicle's surroundings before starting the  
manoeuvre.  
The 180° view facilitates reversing out of a  
parking space, making it possible to see the  
approach of vehicles, pedestrians and cyclists.  
This view is not recommended for carrying out a  
complete manoeuvre.  
It features 3 areas: left A, centre B and right C.  
173