Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Driving -> Memorising speeds for Your Fiat Scudo Van Third Generation (2022-2025)

Driving  
Activation/Deactivation  
When stationary or while driving, no  
objects should be placed around the  
projection blade (or in its recess) so as not to  
impede its movement and correct operation.  
C. If the vehicle is so equipped, inter-vehicle  
distance information, automatic emergency  
braking alerts and navigation instructions.  
D. If the vehicle is so equipped, speed limit  
information.  
► With the engine running, press button 1 to  
activate the system and deploy the projection  
blade.  
In certain extreme weather conditions  
(rain and/or snow, bright sunshine, etc.),  
the head-up display may not be legible or  
may suffer temporary interference.  
For more information about Navigation,  
refer to the sections describing the audio  
and telematics systems.  
Some sunglasses may hamper reading of the  
information.  
Selectors  
To clean the projection blade, use a clean,  
soft cloth (such as a spectacles cloth or  
microfibre cloth). Do not use a dry or abrasive  
cloth, or detergent or solvent products, due to  
the risk of scratching the projection blade or  
damaging the non-reflective coating.  
► Press and hold button 2 to deactivate the  
system and retract the projection blade.  
The state of the system is saved when the  
engine is switched off and restored on restarting.  
This system operates when the engine is  
running, and the settings are saved when  
the ignition is switched off.  
Adjusting the height  
► With the engine running, adjust the display to  
the desired height using the buttons 4:  
• up to move the display up,  
Memorising speeds  
• down to move the display down.  
This function allows you to save speed  
settings which are then used to set the two  
systems: the speed limiter (limits the speed  
of the vehicle) or cruise control (vehicle  
cruising speed).  
1. On.  
Brightness adjustment  
2. Off (long press).  
3. Brightness adjustment.  
4. Display height adjustment.  
► With the engine running, adjust the  
brightness of the information display using the  
buttons 3:  
• on the "sun" to increase the brightness,  
• on the "moon" to decrease the brightness.  
You can save 6 speed settings for each of the  
two systems.  
152